# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option	    "Xinerama" "on"
	#Option	    "Clone" "on"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"

        # Load  "GLcore"	# OpenGL support
	# Load  "record"	# X event recorder
	# You only need the following two modules if you do not use xfs.
	# Load  "freetype"	# TrueType font handler
	# Load  "type1"		# Adobe Type 1 font handler
	Load  "dbe"		# Double-buffering
	Load  "extmod"		# Misc. required extensions
	Load  "dri"		# Direct rendering infrastructure
	Load  "glx"		# OpenGL X protocol interface
	Load  "v4l"		# Video4Linux
EndSection

Section "InputDevice"

#	Option	"AutoRepeat"	"500 5"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	#Option	"XkbOptions"	""
	Identifier  "Keyboard0"
	Driver      "keyboard"

	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"	#Option	"XkbVariant"	"nodeadkeys"
EndSection

Section "InputDevice"

	# Modified by mouseconfig
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Device" "/dev/mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Emulate3Buttons" "no"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "GSM"
	ModelName    "78i"
	HorizSync    30.0 - 85.0
	VertRefresh  50.0 - 120.0
	ModeLine     "1400x1050" 129.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync
	ModeLine     "1400x1050" 151.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync
	ModeLine     "1400x1050" 162.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync
	ModeLine     "1400x1050" 184.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync
	Option	    "dpms"        # -- 1400x1050 --
        # 1400x1050 @ 60Hz, 65.8 kHz hsync
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "MV500"
	HorizSync    32.0 - 54.0
	VertRefresh  50.0 - 90.0
	Option	    "dpms"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "PciRetry"           	# [<bool>]
        #Option     "SyncOnGreen"        	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "Overlay"            	# [<str>]
        #Option     "MGASDRAM"           	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "SetMclk"            	# <freq>
        #Option     "OverclockMem"       	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "Rotate"             	# [<str>]
        #Option     "TexturedVideo"      	# [<bool>]
        #Option     "Crtc2Half"          	# [<bool>]
        #Option     "Crtc2Ram"           	# <i>
        #Option     "Int10"              	# [<bool>]
        #Option     "AGPMode"            	# <i>
        #Option     "DigitalScreen"      	# [<bool>]
        #Option     "TV"                 	# [<bool>]
        #Option     "TVStandard"         	# [<str>]
        #Option     "CableType"          	# [<str>]
        #Option     "NoHal"              	# [<bool>]
        #Option     "SwappedHead"        	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option      "UseInternalAGPGART" "no"
	Identifier  "Card0"
	Driver      "mga"
	VendorName  "Matrox"
	BoardName   "Matrox Millennium G400"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Card1"
	Driver      "s3virge"
	VendorName  "S3"
	BoardName   "ViRGE/DX or /GX"
	BusID       "PCI:0:8:0"
EndSection

Section "Device"
	Identifier  "Linux Frame Buffer"
	Driver      "fbdev"
	BoardName   "Unknown"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Card1"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "800x600"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection