Attachment 850 Details for Bug 1333 – dmesg log

dmesg log

dmesg (text/plain), 12.53 KB, created by Mike on 2004-09-11 00:05:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mike

Created: 2004-09-11 00:05:27 UTC

Size: 12.53 KB

patch

obsolete

>Linux version 2.6.8-1.541 (bhcompile@porky.build.redhat.com) (gcc version 3.4.1 20040831 (Red Hat 3.4.1-10)) #1 Wed Sep 1 18:01:20 EDT 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
> BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000013cf0000 (usable)
> BIOS-e820: 0000000013cf0000 - 0000000013cfc000 (ACPI data)
> BIOS-e820: 0000000013cfc000 - 0000000013d00000 (ACPI NVS)
> BIOS-e820: 0000000013d00000 - 0000000013e80000 (usable)
> BIOS-e820: 0000000013e80000 - 0000000014000000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>318MB LOWMEM available.
>zapping low mappings.
>On node 0 totalpages: 81536
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 77440 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: RSDP (v000 PTLTD                                     ) @ 0x000f7120
>ACPI: RSDT (v001 SONY   U1       0x20010312 PTL  0x00000000) @ 0x13cf74cb
>ACPI: FADT (v001   SONY       U1 0x20010312 PTL  0x01000000) @ 0x13cfbf64
>ACPI: BOOT (v001   SONY       U1 0x20010312 PTL  0x00000001) @ 0x13cfbfd8
>ACPI: DSDT (v001   SONY       U1 0x20010312 PTL  0x0100000b) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/1 
>mapped 4G/4G trampoline to ffff4000.
>Initializing CPU#0
>CPU 0 irqstacks, hard=023c6000 soft=023c5000
>PID hash table entries: 2048 (order 11: 16384 bytes)
>Detected 745.549 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 318988k/326144k available (2024k kernel code, 6520k reserved, 631k data, 144k init, 0k highmem)
>Calibrating delay loop... 1470.46 BogoMIPS (lpj=735232)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  0383f9ff 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps:        0383f1ff 00000000 00000000 00000040
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel Pentium III (Coppermine) stepping 06
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: IRQ9 SCI: Level Trigger.
>checking if image is initramfs... it is
>Freeing initrd memory: 325k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040715
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: Embedded Controller [EC0] (gpe 28)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9) *0
>ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
>ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
>ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
>ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
>ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9
>get_random_bytes called before random driver initialization
>vesafb: probe of vesafb0 failed with error -6
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1094884297.4294966409:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key EB180CB126A51024
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states)
>ACPI: Thermal Zone [ATF0] (57 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel i815 Chipset.
>agpgart: Maximum main memory to use for agp memory: 261M
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH2M: IDE controller at PCI slot 0000:00:1f.1
>ICH2M: chipset revision 3
>ICH2M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK6026GAX, ATA DISK drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>ide2: Wait for ready failed before probe !
>Probing IDE interface ide3...
>ide3: Wait for ready failed before probe !
>Probing IDE interface ide4...
>ide4: Wait for ready failed before probe !
>Probing IDE interface ide5...
>ide5: Wait for ready failed before probe !
>hda: max request size: 128KiB
>hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>serio: i8042 AUX port at 0x60,0x64 irq 12
>input: PS/2 Generic Mouse on isa0060/serio1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 512 buckets, 16Kbytes
>TCP: Hash tables configured (established 32768 bind 9362)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S3 S4 S5)
>ACPI wakeup devices: 
>PWRB  LAN CRD0  EC0 COMA USB1 USB2 MODE 
>Freeing unused kernel memory: 144k freed
>SCSI subsystem initialized
>ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]  MMIO=[f4101000-f41017ff]  Max Packet=[2048]
>sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0800460300c95afb]
>ieee1394: Host added: ID:BUS[0-01:1023]  GUID[0800460300c2f7fa]
>scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  Vendor: MATSHITA  Model: UJDA710           Rev: 1.04
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
>kmodule: Using deprecated /dev/sg mechanism instead of SG_IO on the actual device
>inserting floppy driver for 2.6.8-1.541
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
>e100: Copyright(c) 1999-2004 Intel Corporation
>ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9
>divert: allocating divert_blk for eth0
>e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:16:AE:D5
>eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
>eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 49339 usecs
>intel8x0: clocking to 48000
>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
>hw_random hardware driver 1.0.0 loaded
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 9 (level, low) -> IRQ 9
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: irq 9, io base 00001820
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: irq 9, io base 00002400
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 9 (level, low) -> IRQ 9
>Yenta: CardBus bridge found at 0000:01:02.0 [104d:80e0]
>Yenta: ISA IRQ mask 0x0090, PCI irq 9
>Socket status: 30000006
>usb 1-1: new full speed USB device using address 2
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 3 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>usb 2-1: new full speed USB device using address 2
>usb 1-1.1: new low speed USB device using address 3
>Initializing USB Mass Storage driver...
>scsi1 : SCSI emulation for USB Mass Storage devices
>  Vendor: Sony      Model: MSC-U02           Rev: 1.00
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
>USB Mass Storage device found at 2
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>input: USB HID v1.10 Keyboard [Logitech    USB Keyboard] on usb-0000:00:1f.2-1.1
>input: USB HID v1.10 Device [Logitech    USB Keyboard] on usb-0000:00:1f.2-1.1
>usb 1-1.2: new low speed USB device using address 4
>ACPI: AC Adapter [ACAD] (on-line)
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1f.2-1.2
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>EXT3 FS on hda9, internal journal
>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 650592k swap on /dev/hda7.  Priority:-1 extents:1
>Adding 650592k swap on /dev/hda10.  Priority:-2 extents:1

Actions: View

Attachments on bug 1333: 849 | 850 | 851 | 852 | 857 | 858 | 859 | 860 | 865 | 866 | 868 | 869 | 870 | 871 | 872 | 885 | 886 | 888 | 889 | 890 | 891

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.