*********************** ****** xorg.conf ****** *********************** # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "single head configuration" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "no" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1024x768" DisplaySize 360 270 HorizSync 31.5 - 48.5 VertRefresh 40.0 - 70.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "i810" VendorName "Videocard vendor" BoardName "Intel 815" Option "DRI" "no" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection ************************ ****** Xorg.0.log ****** ************************ This is a pre-release version of the The X.Org Foundation X11. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the The X.Org Foundation "monolithic tree" CVS repository hosted at http://www.freedesktop.org/Software/xorg/ X Window System Version 6.7.99.903 (6.8.0 RC 3) Release Date: 28 August 2004 X Protocol Version 11, Revision 0, Release 6.7.99.903 Build Operating System: Linux 2.6.8-1.541smp i686 [ELF] Current Operating System: Linux linmaster 2.6.8-1.541 #1 Wed Sep 1 18:01:20 EDT 2004 i686 Build Date: 03 September 2004 Build Host: tweety.build.redhat.com Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.8-1.541 (bhcompile@porky.build.redhat.com) (gcc version 3.4.1 20040831 (Red Hat 3.4.1-10)) #1 Wed Sep 1 18:01:20 EDT 2004 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 12 12:27:33 2004 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "single head configuration" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (++) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000f9fc, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1130 card 104d,80e0 rev 11 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,1132 card 104d,80e0 rev 11 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 03 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,244a card 104d,80e0 rev 03 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2442 card 104d,80e0 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2443 card 104d,80e0 rev 03 class 0c,05,00 hdr 00 (II) PCI: 00:1f:4: chip 8086,2444 card 104d,80e0 rev 03 class 0c,03,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2445 card 104d,80e0 rev 03 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2446 card 104d,80e0 rev 03 class 07,03,00 hdr 00 (II) PCI: 01:00:0: chip 104c,8021 card 104d,80e0 rev 02 class 0c,00,10 hdr 00 (II) PCI: 01:02:0: chip 1180,0475 card 4000,0000 rev 80 class 06,07,00 hdr 02 (II) PCI: 01:08:0: chip 8086,2449 card 8086,3013 rev 03 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B] [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B] [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B] [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (1:2:0), (1,2,5), BCTRL: 0x0580 (VGA_EN is cleared) (--) PCI:*(0:2:0) Intel Corp. 82815 CGC [Chipset Graphics Controller] rev 17, Mem @ 0xf8000000/26, 0xf4000000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B] [1] -1 0 0xf4104000 - 0xf4107fff (0x4000) MX[B] [2] -1 0 0xf4101000 - 0xf41017ff (0x800) MX[B] [3] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [4] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [5] -1 0 0x00003000 - 0x0000303f (0x40) IX[B] [6] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [7] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [8] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [9] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [10] -1 0 0x00002400 - 0x0000241f (0x20) IX[B] [11] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [12] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B] [1] -1 0 0xf4104000 - 0xf4107fff (0x4000) MX[B] [2] -1 0 0xf4101000 - 0xf41017ff (0x800) MX[B] [3] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [4] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [5] -1 0 0x00003000 - 0x0000303f (0x40) IX[B] [6] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [7] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [8] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [9] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [10] -1 0 0x00002400 - 0x0000241f (0x20) IX[B] [11] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [12] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [13] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B] [6] -1 0 0xf4104000 - 0xf4107fff (0x4000) MX[B] [7] -1 0 0xf4101000 - 0xf41017ff (0x800) MX[B] [8] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x00003000 - 0x0000303f (0x40) IX[B] [13] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [14] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [15] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [16] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [17] -1 0 0x00002400 - 0x0000241f (0x20) IX[B] [18] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [20] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 0.0.2 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.7.99.903, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "i810" (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o (II) Module i810: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.3.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (--) Chipset i815 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B] [6] -1 0 0xf4104000 - 0xf4107fff (0x4000) MX[B] [7] -1 0 0xf4101000 - 0xf41017ff (0x800) MX[B] [8] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x00003000 - 0x0000303f (0x40) IX[B] [13] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [14] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [15] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [16] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [17] -1 0 0x00002400 - 0x0000241f (0x20) IX[B] [18] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [20] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B] [6] -1 0 0xf4104000 - 0xf4107fff (0x4000) MX[B] [7] -1 0 0xf4101000 - 0xf41017ff (0x800) MX[B] [8] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x00003000 - 0x0000303f (0x40) IX[B] [16] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [17] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [18] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [19] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [20] -1 0 0x00002400 - 0x0000241f (0x20) IX[B] [21] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [22] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [23] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (**) I810(0): Depth 16, (--) framebuffer bpp 16 (==) I810(0): RGB weight 565 (==) I810(0): Default visual is TrueColor (**) I810(0): Option "DRI" "no" (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.2.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) I810(0): initializing int10 (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 1024 kB (II) I810(0): VESA VBE OEM: Intel815M(TM) Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: i815M Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: VSC Model: 4a4d Serial#: 24425 (II) I810(0): Year: 1999 Week: 51 (II) I810(0): EDID Version: 1.2 (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) I810(0): Sync: Separate Composite SyncOnGreen (II) I810(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27 (II) I810(0): Gamma: 2.41 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): First detailed timing is preferred mode (II) I810(0): GTF timings supported (II) I810(0): redX: 0.635 redY: 0.333 greenX: 0.285 greenY: 0.605 (II) I810(0): blueX: 0.152 blueY: 0.068 whiteX: 0.283 whiteY: 0.298 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 720x400@70Hz (II) I810(0): 720x400@88Hz (II) I810(0): 640x480@60Hz (II) I810(0): 640x480@67Hz (II) I810(0): 640x480@72Hz (II) I810(0): 640x480@75Hz (II) I810(0): 800x600@56Hz (II) I810(0): 800x600@60Hz (II) I810(0): 800x600@72Hz (II) I810(0): 800x600@75Hz (II) I810(0): 832x624@75Hz (II) I810(0): 1024x768@87Hz (interlaced) (II) I810(0): 1024x768@60Hz (II) I810(0): 1024x768@70Hz (II) I810(0): 1024x768@75Hz (II) I810(0): 1280x1024@75Hz (II) I810(0): 1152x870@75Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported Future Video Modes: (II) I810(0): #0: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) I810(0): #1: hsize: 1600 vsize 1200 refresh: 70 vid: 19113 (II) I810(0): #2: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) I810(0): #3: hsize: 1280 vsize 960 refresh: 85 vid: 22913 (II) I810(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) I810(0): #5: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 157.5 MHz Image Size: 352 x 264 mm (II) I810(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0 (II) I810(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0 (II) I810(0): Serial No: MJ95124425 (II) I810(0): Ranges: V min: 50 V max: 180 Hz, H min: 30 H max: 97 kHz, PixClock max 220 MHz (II) I810(0): Monitor name: PS790-2 (--) I810(0): Chipset: "i815" (--) I810(0): Linear framebuffer at 0xF8000000 (--) I810(0): IO registers at addr 0xF4000000 (II) I810(0): I810CheckAvailableMemory: 267260k available (==) I810(0): Will alloc AGP framebuffer: 8192 kByte (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (WW) I810(0): config file vrefresh range 40-70Hz not within DDC vrefresh ranges. (II) I810(0): Monitor0: Using hsync range of 31.50-48.50 kHz (II) I810(0): Monitor0: Using vrefresh range of 40.00-70.00 Hz (II) I810(0): Clock range: 9.50 to 163.00 MHz (II) I810(0): Not using default mode "640x350" (vrefresh out of range) (II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "640x400" (vrefresh out of range) (II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "720x400" (vrefresh out of range) (II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "640x480" (vrefresh out of range) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "640x480" (vrefresh out of range) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "640x480" (vrefresh out of range) (II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (vrefresh out of range) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (vrefresh out of range) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (hsync out of range) (II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (unknown reason) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (hsync out of range) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (hsync out of range) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (hsync out of range) (II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1152x864" (hsync out of range) (II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x960" (hsync out of range) (II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x960" (hsync out of range) (II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1280x1024" (hsync out of range) (II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (hsync out of range) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "832x624" (hsync out of range) (II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1152x864" (hsync out of range) (II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (hsync out of range) (II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (hsync out of range) (II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (hsync out of range) (II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1600x1024" (hsync out of range) (II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) I810(0): Not using default mode "1152x768" (width too large for virtual size) (--) I810(0): Virtual size is 1024x768 (pitch 1024) (**) I810(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) I810(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) I810(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) I810(0): Display dimensions: (360, 270) mm (**) I810(0): DPI set to (72, 72) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="X.Org Foundation" compiled for 6.7.99.903, module version = 0.1.0 ABI class: X.Org Video Driver, version 0.7 (II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable. (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xf4000000 - 0xf407ffff (0x80000) MS[B] [1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xf4100000 - 0xf4100fff (0x1000) MX[B] [8] -1 0 0xf4104000 - 0xf4107fff (0x4000) MX[B] [9] -1 0 0xf4101000 - 0xf41017ff (0x800) MX[B] [10] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B) [11] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x00003000 - 0x0000303f (0x40) IX[B] [18] -1 0 0x00001880 - 0x000018ff (0x80) IX[B] [19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [20] -1 0 0x00001840 - 0x0000187f (0x40) IX[B] [21] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B] [22] -1 0 0x00002400 - 0x0000241f (0x20) IX[B] [23] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [24] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [25] -1 0 0x00001800 - 0x0000180f (0x10) IX[B] [26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) I810(0): Write-combining range (0xf8000000,0x4000000) (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) I810(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ] (II) I810(0): chose watermark 0x2210e000: (tab.freq 65.0) (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0) (WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed (Cannot allocate memory) (II) I810(0): No physical memory available for 4194304 bytes of DCACHE (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048) (II) I810(0): Allocated of 4096 bytes for HW cursor (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x00801000 (pgoffset 2049) (II) I810(0): Allocated of 16384 bytes for ARGB HW cursor (II) I810(0): Adding 768 scanlines for pixmap caching (II) I810(0): Allocated Scratch Memory (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 24 128x128 slots 6 256x256 slots (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (**) Option "dpms" (**) I810(0): DPMS enabled (**) I810(0): Direct rendering disabled (==) RandR enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "IMPS/2" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "IMPS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) Mouse0: ps2EnableDataReporting: succeeded AUDIT: Sun Sep 12 12:28:06 2004: 3377 X: client 4 rejected from local host ******************* ****** dmesg ****** ******************* Linux version 2.6.8-1.541 (bhcompile@porky.build.redhat.com) (gcc version 3.4.1 20040831 (Red Hat 3.4.1-10)) #1 Wed Sep 1 18:01:20 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013cf0000 (usable) BIOS-e820: 0000000013cf0000 - 0000000013cfc000 (ACPI data) BIOS-e820: 0000000013cfc000 - 0000000013d00000 (ACPI NVS) BIOS-e820: 0000000013d00000 - 0000000013e80000 (usable) BIOS-e820: 0000000013e80000 - 0000000014000000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 318MB LOWMEM available. zapping low mappings. On node 0 totalpages: 81536 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 77440 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7120 ACPI: RSDT (v001 SONY U1 0x20010312 PTL 0x00000000) @ 0x13cf74cb ACPI: FADT (v001 SONY U1 0x20010312 PTL 0x01000000) @ 0x13cfbf64 ACPI: BOOT (v001 SONY U1 0x20010312 PTL 0x00000001) @ 0x13cfbfd8 ACPI: DSDT (v001 SONY U1 0x20010312 PTL 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Built 1 zonelists Kernel command line: ro root=LABEL=/1 mapped 4G/4G trampoline to ffff4000. Initializing CPU#0 CPU 0 irqstacks, hard=023c6000 soft=023c5000 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 745.486 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 318988k/326144k available (2024k kernel code, 6520k reserved, 631k data, 144k init, 0k highmem) Calibrating delay loop... 1470.46 BogoMIPS (lpj=735232) Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. checking if image is initramfs... it is Freeing initrd memory: 325k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040715 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: Embedded Controller [EC0] (gpe 28) ACPI: PCI Interrupt Link [LNKA] (IRQs 9) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 9) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs *9) ACPI: PCI Interrupt Link [LNKE] (IRQs *9) ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0 Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9 get_random_bytes called before random driver initialization vesafb: probe of vesafb0 failed with error -6 Simple Boot Flag at 0x36 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1095009971.530:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key EB180CB126A51024 - User ID: Red Hat, Inc. (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) ACPI: Thermal Zone [ATF0] (54 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: Maximum main memory to use for agp memory: 261M agpgart: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2M: IDE controller at PCI slot 0000:00:1f.1 ICH2M: chipset revision 3 ICH2M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: TOSHIBA MK6026GAX, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 > ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 16Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4 S5) ACPI wakeup devices: PWRB LAN CRD0 EC0 COMA USB1 USB2 MODE Freeing unused kernel memory: 144k freed SCSI subsystem initialized ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 9 (level, low) -> IRQ 9 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[f4101000-f41017ff] Max Packet=[2048] sbp2: $Rev: 1219 $ Ben Collins kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460300c2f7fa] ieee1394: Node added: ID:BUS[0-01:1023] GUID[0800460300c95afb] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... ieee1394: Node changed: 0-01:1023 -> 0-00:1023 ieee1394: Node changed: 0-00:1023 -> 0-01:1023 scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices ieee1394: sbp2: Logged into SBP-2 device ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Vendor: MATSHITA Model: UJDA710 Rev: 1.04 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 kmodule: Using deprecated /dev/sg mechanism instead of SG_IO on the actual device inserting floppy driver for 2.6.8-1.541 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 9 (level, low) -> IRQ 9 divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xf4100000, irq 9, MAC addr 08:00:46:16:AE:D5 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49339 usecs intel8x0: clocking to 48000 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 9 (level, low) -> IRQ 9 PCI: Setting latency timer of device 0000:00:1f.6 to 64 MC'97 1 converters and GPIO not ready (0xff00) i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware hw_random hardware driver 1.0.0 loaded USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1f.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: irq 9, io base 00001820 uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 9 (level, low) -> IRQ 9 uhci_hcd 0000:00:1f.4: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: irq 9, io base 00002400 uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 9 (level, low) -> IRQ 9 Yenta: CardBus bridge found at 0000:01:02.0 [104d:80e0] Yenta: ISA IRQ mask 0x0890, PCI irq 9 Socket status: 30000006 usb 1-1: new full speed USB device using address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 3 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 2-1: new full speed USB device using address 2 usb 1-1.1: new low speed USB device using address 3 Initializing USB Mass Storage driver... input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1f.2-1.1 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: Sony Model: MSC-U02 Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1f.2-1.1 ACPI: AC Adapter [ACAD] (on-line) usb 1-1.2: new low speed USB device using address 4 ACPI: Battery Slot [BAT1] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1f.2-1.2 EXT3 FS on hda9, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 650592k swap on /dev/hda7. Priority:-1 extents:1 Adding 650592k swap on /dev/hda10. Priority:-2 extents:1