lt-qmicli [OPTION?] - Control QMI devices

   Help Options:
       -h, --help
              Show help options

       --help-all
              Show all help options

       --help-dms
              Show Device Management Service options

       --help-nas
              Show Network Access Service options

       --help-wds
              Show Wireless Data Service options

       --help-pbm
              Show Phonebook Management options

       --help-pdc
              Show platform device configurations options

       --help-uim
              Show User Identity Module options

       --help-wms
              Show Wireless Messaging Service options

       --help-wda
              Show Wireless Data Administrative options

       --help-voice
              Show Voice Service options

       --help-loc
              Show location options

       --help-qos
              Show Quality of Service options

       DMS options

       --dms-get-ids
              Get IDs

       --dms-get-capabilities
              Get capabilities

       --dms-get-manufacturer
              Get manufacturer
              Set PIN protection in the UIM

       --dms-uim-verify-pin=[(PIN|PIN2),(current PIN)]
              Verify PIN

       --dms-uim-unblock-pin=[(PIN|PIN2),(PUK),(new PIN)]
              Unblock PIN

       --dms-uim-change-pin=[(PIN|PIN2),(old PIN),(new PIN)]
              Change PIN

       --dms-uim-get-pin-status
              Get PIN status

       --dms-uim-get-iccid
              Get ICCID

       --dms-uim-get-imsi
              Get IMSI

       --dms-uim-get-state
              Get UIM State

       --dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]
              Get CK Status

       --dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]
              Disable CK protection

       --dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]
              Unblock CK

       --dms-get-hardware-revision
              Get the HW revision

       --dms-get-operating-mode
              Get the device operating mode

       --dms-set-operating-mode=[(Operating mode)]
              Set the device operating mode

       --dms-get-time
              Get the device time

       --dms-get-prl-version
              Get the PRL version

       --dms-get-activation-state
              Get the state of the service activation

       --dms-activate-automatic=[Activation Code]
              Request automatic service activation
              Read user data

       --dms-write-user-data=[(User data)]
              Write user data

       --dms-read-eri-file
              Read ERI file

       --dms-restore-factory-defaults=[(Service Programming Code)]
              Restore factory defaults

       --dms-validate-service-programming-code=[(Service Programming Code)]
              Validate the Service Programming Code

       --dms-set-firmware-id
              Set firmware id

       --dms-get-band-capabilities
              Get band capabilities

       --dms-get-factory-sku
              Get factory stock keeping unit

       --dms-list-stored-images
              List stored images

       --dms-select-stored-image=[modem#,pri#] where # is the index
              Select stored image

       --dms-delete-stored-image=[modem#|pri#] where # is the index
              Delete stored image

       --dms-get-firmware-preference
              Get firmware preference

       --dms-set-firmware-preference=[(fwver),(config),(carrier)]
              Set firmware preference

       --dms-get-boot-image-download-mode
              Get boot image download mode

       --dms-set-boot-image-download-mode=[normal|boot-and-recovery]
              Set boot image download mode

       --dms-get-software-version
              Get software version

       --dms-set-fcc-authentication
              Set FCC authentication

       --dms-get-supported-messages
              Get supported messages
              Reset the service state

       --dms-noop
              Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'

       NAS options

       --nas-get-signal-strength
              Get signal strength

       --nas-get-signal-info
              Get signal info

       --nas-get-tx-rx-info=[(Radio Interface)]
              Get TX/RX info

       --nas-get-home-network
              Get home network

       --nas-get-serving-system
              Get serving system

       --nas-get-system-info
              Get system info

       --nas-get-technology-preference
              Get technology preference

       --nas-get-system-selection-preference
              Get system selection preference

       --nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma]
              Set system selection preference

       --nas-network-scan
              Scan networks

       --nas-get-cell-location-info
              Get Cell Location Info

       --nas-force-network-search
              Force network search

       --nas-get-operator-name
              Get operator name data

       --nas-get-lte-cphy-ca-info
              Get LTE Cphy CA Info

       --nas-get-rf-band-info
              Get RF Band Info

       --wds-follow-network
              Follow the network status until disconnected. Use with `--wds-start-network'

       --wds-stop-network=[Packet data handle] OR [disable-autoconnect]
              Stop network

       --wds-get-current-settings
              Get current settings

       --wds-get-packet-service-status
              Get packet service status

       --wds-get-packet-statistics
              Get packet statistics

       --wds-get-data-bearer-technology
              Get data bearer technology

       --wds-get-current-data-bearer-technology
              Get current data bearer technology

       --wds-go-dormant
              Make the active data connection go dormant

       --wds-go-active
              Make the active data connection go active

       --wds-get-dormancy-status
              Get the dormancy status of the active data connection

       --wds-create-profile=["(3gpp|3gpp2)[,key=value,...]"]
              Create  new  profile  using  first available profile index (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes,
              disabled=yes)

       --wds-swi-create-profile-indexed=["(3gpp|3gpp2),#[,key=value,...]"]
              Create new profile at specified profile index [Sierra Wireless specific] (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username,  password,  context-num,
              no-roaming=yes, disabled=yes)

       --wds-modify-profile=["(3gpp|3gpp2),#,key=value,..."]
              Modify existing profile (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

       --wds-delete-profile=[(3gpp|3gpp2),#]
              Delete existing profile

       --wds-get-profile-list=[3gpp|3gpp2]
              Get profile list

       --wds-get-default-profile-num=[3gpp|3gpp2]
              Get default profile number

       --wds-set-default-profile-num=[(3gpp|3gpp2),#]
              Set default profile number
              Reset the service state

       --wds-bind-mux-data-port=["key=value,..."]
              Bind qmux data port to controller device (allowed keys: mux-id, ep-iface-number) to be used with `--client-no-release-cid'

       --wds-set-ip-family=[4|6]
              Set IP family

       --wds-get-channel-rates
              Get channel data rates

       --wds-noop
              Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'

       PBM options

       --pbm-get-all-capabilities
              Get all phonebook capabilities

       --pbm-noop
              Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'

       PDC options

       --pdc-list-configs=[(platform|software)]
              List all configs

       --pdc-delete-config=[(platform|software),ConfigId]
              Delete config

       --pdc-activate-config=[(platform|software),ConfigId]
              Activate config

       --pdc-deactivate-config=[(platform|software),ConfigId]
              Deactivate config

       --pdc-load-config=[Path to config]
              Load config to device

       --pdc-noop
              Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'

       UIM options

       --uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)]
              Set PIN protection

       --uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)]
              Verify PIN

       --uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)]
              Unblock PIN
              Get card status

       --uim-get-supported-messages
              Get supported messages

       --uim-sim-power-on=[(slot number)]
              Power on SIM card

       --uim-sim-power-off=[(slot number)]
              Power off SIM card

       --uim-reset
              Reset the service state

       --uim-noop
              Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'

       WMS options

       --wms-get-supported-messages
              Get supported messages

       --wms-reset
              Reset the service state

       --wms-noop
              Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'

       WDA options

       --wda-set-data-format=["key=value,..."]
              Set  data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-protocol (tlp|qc-ncm|mbim|rndis|qmap), dl-datagrams-max-size, dl-max-datagrams,
              ep-type (undefined|hsusb), ep-iface-number)

       --wda-get-data-format
              Get data format

       --wda-get-supported-messages
              Get supported messages

       --wda-noop
              Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'

       VOICE options

       --voice-get-config
              Get Voice service configuration

       --voice-get-supported-messages
              Get supported messages

       --voice-noop
              Get position reported by the location module

       --loc-get-gnss-sv-info
              Show GNSS space vehicle info

       --loc-timeout=[SECS]
              Maximum time to wait for information in `--loc-get-position-report' and `--loc-get-gnss-sv-info' (default 30s)

       --loc-follow-position-report
              Follow all position updates reported by the location module indefinitely

       --loc-follow-gnss-sv-info
              Follow all GNSS space vehicle info updates reported by the location module indefinitely

       --loc-follow-nmea
              Follow all NMEA trace updates reported by the location module indefinitely

       --loc-delete-assistance-data
              Delete positioning assistance data

       --loc-noop
              Just allocate or release a LOC client. Use with `--client-no-release-cid' and/or `--client-cid'

       QoS options

       --qos-get-flow-status=[QoS ID]
              Get QoS flow status

       --qos-get-network-status
              Gets the network status

       --qos-swi-read-data-stats=[APN ID]
              Read data stats (Sierra Wireless specific)

       --qos-reset
              Reset the service state

       --qos-noop
              Just allocate or release a QOS client. Use with `--client-no-release-cid' and/or `--client-cid'

   Application Options:
       -d, --device=[PATH]
              Specify device path

       -w, --get-wwan-iface
              Get the WWAN iface name associated with this control port

       -e, --get-expected-data-format
              Get the expected data format in the WWAN iface

       -E, --set-expected-data-format=[802-3|raw-ip]
              Set the expected data format in the WWAN iface
              Request to use the 'qmi-proxy' proxy

       --device-open-qmi
              Open a cdc-wdm device explicitly in QMI mode

       --device-open-mbim
              Open a cdc-wdm device explicitly in MBIM mode

       --device-open-auto
              Open a cdc-wdm device in either QMI or MBIM mode (default)

       --device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]
              Open device with specific link protocol and QoS flags

       --client-cid=[CID]
              Use the given CID, don't allocate a new one

       --client-no-release-cid
              Do not release the CID when exiting

       -v, --verbose
              Run action with verbose logs, including the debug ones

       --silent
              Run action with no logs; not even the error/warning ones

       -V, --version
              Print version

       qmicli 1.22.0 Copyright © 2012-2019 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute
       it.  There is NO WARRANTY, to the extent permitted by law.

SEE ALSO
       The full documentation for qmicli is maintained as a Texinfo manual.  If the info and qmicli programs are properly installed at your site, the command

              info qmicli

       should give you access to the complete manual.

qmicli                                                                                           January 2019                                                                                        QMICLI(1)

Man(1) output converted with man2html