lt-qmi-firmware-update [OPTION?] FILE1 FILE2... - Update firmware in QMI devices

       Generic device selection options

       -s, --busnum-devnum=[BUS:]DEV
              Select device by bus and device number (in decimal).

       -d, --vid-pid=VID[:PID]
              Select device by device vendor and product id (in hexadecimal).

       -w, --cdc-wdm=[PATH]
              Select device by QMI/MBIM cdc-wdm device path (e.g. /dev/cdc-wdm0).

       -t, --tty=[PATH]
              Select device by serial device path (e.g. /dev/ttyUSB2).

       Update options (normal mode)

       -u, --update
              Launch firmware update process.

       -f, --firmware-version=[VERSION]
              Firmware version (e.g. '05.05.58.00').

       -c, --config-version=[VERSION]
              Config version (e.g. '005.025_002').

       -C, --carrier=[CARRIER]
              Carrier name (e.g. 'Generic').

       --ignore-version-errors
              Run update operation even with version string errors.

       --override-download
              Download images even if module says it already has them.

       --modem-storage-index=[INDEX]
              Index storage for the modem image.

       --skip-validation
              Don't wait to validate the running firmware after update.

       Reset options (normal mode)

       -b, --reset
              Reset device into QDL download mode.

       Update options (QDL mode)

       -U, --update-qdl
              Launch firmware update process in QDL mode.


       --device-open-auto
              Open a cdc-wdm device in either QMI or MBIM mode (default)

       --ignore-mm-runtime-check
              Ignore ModemManager runtime check

       -v, --verbose
              Run action with verbose messages in standard output, including the debug ones.

       -S, --silent
              Run action with no messages in standard output; not even the error ones.

       -L, --verbose-log=[PATH]
              Write verbose messages to an output file.

       -V, --version
              Print version.

       -h, --help
              Show help.

       -H, --help-examples
              Show help examples.

       ***************************************************************************
              Warning!

              ***************************************************************************

              Use this program with caution. The authors take *no* responsibility if any device gets broken as a result of using this program.

              Please report issues to the libqmi mailing list at:

              libqmi-devel@lists.freedesktop.org

       qmi-firmware-update 1.22.4

              Copyright (C) 2016-2019 Bj?rn Mork Copyright (C) 2016-2019 Aleksander Morgado Copyright (C) 2016-2018 Zodiac Inflight Innovations

       License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it.  There is NO WARRANTY, to the extent permitted by law.

SEE ALSO
       The full documentation for qmi-firmware-update is maintained as a Texinfo manual.  If the info and qmi-firmware-update programs are properly installed at your site, the command

              info qmi-firmware-update

       should give you access to the complete manual.

qmi-firmware-update                                                                                                    April 2019                                                                                                QMI-FIRMWARE-UPDATE(1)

Man(1) output converted with man2html