QMI-FIRMWARE-UPDATE man page

qmi-firmware-update - Update firmware in QMI devices

lt-qmi-firmware-update [OPTION?] FILE1 FILE2... - Update firmware in QMI devices

Generic device selection options

-s, --busnum-devnum=,[BUS/:]DEV Select device by bus and device number (in decimal).

-d, --vid-pid=,VID[/:PID] Select device by device vendor and product id (in hexadecimal).

-w, --cdc-wdm=,[PATH]/ Select device by QMI/MBIM cdc-wdm device path (e.g. ,/dev/cdc-wdm0/).

-t, --tty=,[PATH]/ Select device by serial device path (e.g. ,/dev/ttyUSB2/).

Update options (normal mode)

-u, --update Launch firmware update process.

-f, --firmware-version=,[VERSION]/ Firmware version (e.g. '05.05.58.00').

-c, --config-version=,[VERSION]/ Config version (e.g. '005.025_002').

-C, --carrier=,[CARRIER]/ Carrier name (e.g. 'Generic').

--ignore-version-errors Run update operation even with version string errors.

--override-download Download images even if module says it already has them.

--modem-storage-index=,[INDEX]/ Index storage for the modem image.

--skip-validation Don't wait to validate the running firmware after update.

Reset options (normal mode)

-b, --reset Reset device into download mode.

Update options (download mode)

-U, --update-download Launch firmware update process while in download (boot & hold) mode.

Verify options

-z, --verify Analyze and verify firmware images.

-p, --device-open-proxy Request to use the 'qmi-proxy' proxy.

--device-open-qmi Open a cdc-wdm device explicitly in QMI mode

--device-open-mbim Open a cdc-wdm device explicitly in MBIM mode

--device-open-auto Open a cdc-wdm device in either QMI or MBIM mode (default)

--ignore-mm-runtime-check Ignore ModemManager runtime check

-v, --verbose Run action with verbose messages in standard output, including the debug ones.

-S, --silent Run action with no messages in standard output; not even the error ones.

-L, --verbose-log=,[PATH]/ Write verbose messages to an output file.

-V, --version Print version.

-h, --help Show help.

-H, --help-examples Show help examples.

*************************************************************************** Warning!

***************************************************************************

Use this program with caution. The authors take *no* responsibility if any device gets broken as a result of using this program.

Please report issues to the libqmi mailing list at:

libqmi-devel@lists.freedesktop.org

qmi-firmware-update 1.24.10

Copyright (C) 2016-2019 Bj?rn Mork Copyright (C) 2016-2019 Aleksander Morgado Copyright (C) 2016-2018 Zodiac Inflight Innovations

License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

The full documentation for qmi-firmware-update is maintained as a Texinfo manual. If the info and qmi-firmware-update programs are properly installed at your site, the command

info qmi-firmware-update

should give you access to the complete manual.