QMICLI man page

--help-gas Show General Application Service options

DMS options

--dms-get-ids Get IDs

--dms-get-capabilities Get capabilities

--dms-get-manufacturer Get manufacturer

--dms-get-model Get model

--dms-get-revision Get revision

--dms-get-msisdn Get MSISDN

--dms-get-power-state Get power state

--dms-uim-set-pin-protection=,[/(PIN|PIN2),(disable|enable),(current PIN)] Set PIN protection in the UIM

--dms-uim-verify-pin=,[/(PIN|PIN2),(current PIN)] Verify PIN

--dms-uim-unblock-pin=,[/(PIN|PIN2),(PUK),(new PIN)] Unblock PIN

--dms-uim-change-pin=,[/(PIN|PIN2),(old PIN),(new PIN)] Change PIN

--dms-uim-get-pin-status Get PIN status

--dms-uim-get-iccid Get ICCID

--dms-uim-get-imsi Get IMSI

--dms-uim-get-state Get UIM State

--dms-uim-get-ck-status=,[/(pn|pu|pp|pc|pf)] Get CK Status

--dms-uim-set-ck-protection=,[/(pn|pu|pp|pc|pf),(disable),(key)] Disable CK protection

--dms-uim-unblock-ck=,[/(pn|pu|pp|pc|pf),(key)] Unblock CK

--dms-get-hardware-revision Get the HW revision

--dms-get-operating-mode Get the device operating mode

--dms-set-operating-mode=,[/(Operating mode)] Set the device operating mode

--dms-get-time Get the device time

--dms-get-prl-version Get the PRL version

--dms-get-activation-state Get the state of the service activation

--dms-activate-automatic=,[Activation/ Code] Request automatic service activation

--dms-activate-manual=,[SPC/,SID,MDN,MIN] Request manual service activation

--dms-get-user-lock-state Get the state of the user lock

--dms-set-user-lock-state=,[/(disable|enable),(current lock code)] Set the state of the user lock

--dms-set-user-lock-code=,[/(old lock code),(new lock code)] Change the user lock code

--dms-read-user-data Read user data

--dms-write-user-data=,[/(User data)] Write user data

--dms-read-eri-file Read ERI file

--dms-restore-factory-defaults=,[/(Service Programming Code)] Restore factory defaults

--dms-validate-service-programming-code=,[/(Service Programming Code)] Validate the Service Programming Code

--dms-set-firmware-id Set firmware id

--dms-get-band-capabilities Get band capabilities

--dms-get-factory-sku Get factory stock keeping unit

--dms-list-stored-images List stored images

--dms-select-stored-image=,[modem/#,pri#] where # is the index Select stored image

--dms-delete-stored-image=,[modem/#|pri#] where # is the index Delete stored image

--dms-get-firmware-preference Get firmware preference

--dms-set-firmware-preference=,[/(fwver),(config),(carrier)] Set firmware preference

--dms-get-boot-image-download-mode Get boot image download mode

--dms-set-boot-image-download-mode=,[normal/|boot-and-recovery] Set boot image download mode

--dms-get-software-version Get software version

--dms-set-fcc-authentication Set FCC authentication

--dms-get-supported-messages Get supported messages

--dms-hp-change-device-mode=,[fastboot]/ Change device mode (HP specific)

--dms-swi-get-current-firmware Get Current Firmware (Sierra Wireless specific)

--dms-swi-get-usb-composition Get current and supported USB compositions (Sierra Wireless specific)

--dms-swi-set-usb-composition=,[/#] Set USB composition (Sierra Wireless specific)

--dms-dell-change-device-mode=,[fastboot-ota/|fastboot-online] Change device mode (DELL specific)

--dms-dell-get-firmware-version=,[firmware-mcfg-apps/|firmware-mcfg|apps] Get firmware version (DELL specific)

--dms-reset Reset the service state

--dms-noop Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'

NAS options

--nas-get-signal-strength Get signal strength

--nas-get-signal-info Get signal info

--nas-get-tx-rx-info=,[/(Radio Interface)] Get TX/RX info

--nas-get-home-network Get home network

--nas-get-serving-system Get serving system

--nas-get-system-info Get system info

--nas-get-technology-preference Get technology preference

--nas-get-system-selection-preference Get system selection preference

--nas-network-scan Scan networks

--nas-get-cell-location-info Get Cell Location Info

--nas-force-network-search Force network search

--nas-get-operator-name Get operator name data

--nas-get-lte-cphy-ca-info Get LTE Cphy CA Info

--nas-get-rf-band-info Get RF Band Info

--nas-get-supported-messages Get supported messages

--nas-swi-get-status Get status ((Sierra Wireless specific)

--nas-reset Reset the service state

--nas-noop Just allocate or release a NAS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDS options

--wds-start-network=,[/"key=value,..."] Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username, password, autoconnect=yes, ip-type (4|6))

--wds-follow-network Follow the network status until disconnected. Use with `--wds-start-network'

--wds-stop-network=,[Packet/ data handle] OR [disable-autoconnect] Stop network

--wds-get-current-settings Get current settings

--wds-get-packet-service-status Get packet service status

--wds-get-packet-statistics Get packet statistics

--wds-get-data-bearer-technology Get data bearer technology

--wds-get-current-data-bearer-technology Get current data bearer technology

--wds-go-dormant Make the active data connection go dormant

--wds-go-active Make the active data connection go active

--wds-get-dormancy-status Get the dormancy status of the active data connection

--wds-delete-profile=,[/(3gpp|3gpp2),#] Delete existing profile

--wds-get-profile-list=,[3gpp/|3gpp2] Get profile list

--wds-get-default-profile-num=,[3gpp/|3gpp2] Get default profile number

--wds-set-default-profile-num=,[/(3gpp|3gpp2),#] Set default profile number

--wds-get-default-settings=,[3gpp/|3gpp2] Get default settings

--wds-get-autoconnect-settings Get autoconnect settings

--wds-set-autoconnect-settings=,[/(enabled|disabled|paused)[,(roaming-allowed|home-only)]] Set autoconnect settings (roaming settings optional)

--wds-get-supported-messages Get supported messages

--wds-reset Reset the service state

--wds-bind-mux-data-port=,[/"key=value,..."] Bind qmux data port to controller device (allowed keys: mux-id, ep-iface-number) to be used with `--client-no-release-cid'

--wds-set-ip-family=,[4/|6] Set IP family

--wds-get-channel-rates Get channel data rates

--wds-noop Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'

PBM options

--pbm-get-all-capabilities Get all phonebook capabilities

--pbm-noop Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'

PDC options

--pdc-list-configs=,[/(platform|software)] List all configs

--pdc-delete-config=,[/(platform|software),ConfigId] Delete config

--pdc-activate-config=,[/(platform|software),ConfigId] Activate config

--pdc-deactivate-config=,[/(platform|software),ConfigId] Deactivate config

--pdc-load-config=,[Path/ to config] Load config to device

--pdc-noop Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'

UIM options

--uim-set-pin-protection=,[/(PIN1|PIN2|UPIN),(disable|enable),(current PIN)] Set PIN protection

--uim-verify-pin=,[/(PIN1|PIN2|UPIN),(current PIN)] Verify PIN

--uim-unblock-pin=,[/(PIN1|PIN2|UPIN),(PUK),(new PIN)] Unblock PIN

--uim-change-pin=,[/(PIN1|PIN2|UPIN),(old PIN),(new PIN)] Change PIN

--uim-read-transparent=,[0xNNNN/,0xNNNN,...] Read a transparent file given the file path

--uim-get-file-attributes=,[0xNNNN/,0xNNNN,...] Get the attributes of a given file

--uim-read-record=,[/"key=value,..."] Read a record from given file (allowed keys: record-number, record-length, file ([0xNNNN-0xNNNN,...])

--uim-get-card-status Get card status

--uim-get-supported-messages Get supported messages

--uim-sim-power-on=,[/(slot number)] Power on SIM card

--uim-sim-power-off=,[/(slot number)] Power off SIM card

--uim-change-provisioning-session=,[/"key=value,..."] Change provisioning session (allowed keys: session-type, activate, slot, aid)

--uim-reset Reset the service state

--uim-noop Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'

WMS options

--wms-get-supported-messages Get supported messages

--wms-reset Reset the service state

--wms-noop Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDA options

--wda-get-data-format Get data format

--wda-get-supported-messages Get supported messages

--wda-noop Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'

VOICE options

--voice-get-config Get Voice service configuration

--voice-get-supported-messages Get supported messages

--voice-noop Just allocate or release a VOICE client. Use with `--client-no-release-cid' and/or `--client-cid'

LOC options

--loc-session-id=,[ID]/ Session ID for the LOC session

--loc-start Start location gathering

--loc-stop Stop location gathering

--loc-get-position-report Get position reported by the location module

--loc-get-gnss-sv-info Show GNSS space vehicle info

--loc-timeout=,[SECS]/ Maximum time to wait for information in `--loc-get-position-report' and `--loc-get-gnss-sv-info' (default 30s)

--loc-follow-position-report Follow all position updates reported by the location module indefinitely

--loc-follow-gnss-sv-info Follow all GNSS space vehicle info updates reported by the location module indefinitely

--loc-follow-nmea Follow all NMEA trace updates reported by the location module indefinitely

--loc-delete-assistance-data Delete positioning assistance data

--loc-noop Just allocate or release a LOC client. Use with `--client-no-release-cid' and/or `--client-cid'

QoS options

--qos-get-flow-status=,[QoS/ ID] Get QoS flow status

--qos-get-network-status Gets the network status

--qos-swi-read-data-stats=,[APN/ ID] Read data stats (Sierra Wireless specific)

--qos-reset Reset the service state

--qos-noop Just allocate or release a QOS client. Use with `--client-no-release-cid' and/or `--client-cid'

GAS options

--gas-dms-get-firmware-list Gets the list of stored firmware

--gas-dms-get-active-firmware Gets the currently active firmware

--gas-dms-set-active-firmware=,[index]/ Sets the active firmware index

--gas-noop Just allocate or release a GAS client. Use with `--client-no-release-cid' and/or `--client-cid'

Application Options:

-d, --device=,[PATH]/ Specify device path

-w, --get-wwan-iface Get the WWAN iface name associated with this control port

-e, --get-expected-data-format Get the expected data format in the WWAN iface

-E, --set-expected-data-format=,[802-3/|raw-ip] Set the expected data format in the WWAN iface

--get-service-version-info Get service version info

--device-set-instance-id=,[Instance/ ID] Set instance ID

--device-open-version-info Run version info check when opening device

--device-open-sync Run sync operation when opening device

-p, --device-open-proxy Request to use the 'qmi-proxy' proxy

--device-open-qmi Open a cdc-wdm device explicitly in QMI mode

--device-open-mbim Open a cdc-wdm device explicitly in MBIM mode

--device-open-auto Open a cdc-wdm device in either QMI or MBIM mode (default)

--device-open-net=,[net-802-3/|net-raw-ip|net-qos-header|net-no-qos-header] Open device with specific link protocol and QoS flags

--client-cid=,[CID]/ Use the given CID, don't allocate a new one

--client-no-release-cid Do not release the CID when exiting

-v, --verbose Run action with verbose logs, including the debug ones

--silent Run action with no logs; not even the error/warning ones

-V, --version Print version

qmicli 1.24.10 Copyright © 2012-2019 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

QMICLI man page

NAME

DESCRIPTION

Usage:

Help Options:

Application Options:

SEE ALSO