QMI-NETWORK man page


qmi-network - Simple network management of QMI devices


qmi-network [,OPTIONS/] [,DEVICE/] [,COMMAND/]


Simple network management of QMI devices


start Start network connection
stop Stop network connection
status Query network connection status


--profile=,[PATH]/ Use the profile in the specified path
--help Show help options
--version Show version


1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:
2) The qmi-network script requires a profile to work. Unless explicitly specified with `--profile', the file is assumed to be available in the following path:
3) The APN to use should be configured in the profile, in the following way (e.g. assuming APN is called 'internet'):
4) Optional APN user/password strings may be given in the following way:
APN_USER=user APN_PASS=password
5) Optional IP_TYPE strings may be given in the following way:
6) If you want to instruct the qmi-network script to use the qmi-proxy setup, you can do so by configuring the following line in the profile:
7) To instruct the qmi-network script to use an already existing Profile ID, or to create a new one on the fly, use the following configuration in the profile:
PROFILE=number # to use the profile-id number
PROFILE=auto # to create a temporary profile on the fly
8) Once the qmi-network script reports a successful connection you still need to run a DHCP client on the associated WWAN network interface.
Copyright © 2013-2021 Aleksander Morgado License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.


The full documentation for qmi-network is maintained as a Texinfo manual. If the info and qmi-network programs are properly installed at your site, the command
info qmi-network

should give you access to the complete manual.

This HTML page was made with roffit 0.8.