The native, fully-featured API systemd-resolved exposes on the bus, see org.freedesktop.resolve1(5) and org.freedesktop.LogControl1(5) for details. Usage of this API is generally recommended to clients as it is asynchronous and fully featured (for example, properly returns DNSSEC validation status and interface scope for addresses as necessary for supporting link-local networking).

The glibc getaddrinfo(3) API as defined by RFC3493 and its related resolver functions, including gethostbyname(3). This API is widely supported, including beyond the Linux platform. In its current form it does not expose DNSSEC validation status information however, and is synchronous only. This API is backed by the glibc Name Service Switch (nss(5)). Usage of the glibc NSS module nss-resolve(8) is required in order to allow glibc's NSS resolver functions to resolve hostnames via systemd-resolved.

Additionally, systemd-resolved provides a local DNS stub listener on the IP addresses 127.0.0.53 and 127.0.0.54 on the local loopback interface. Programs issuing DNS requests directly, bypassing any local API may be directed to this stub, in order to connect them to systemd-resolved. Note however that it is strongly recommended that local programs use the glibc NSS or bus APIs instead (as described above), as various network resolution concepts (such as link-local addressing, or LLMNR Unicode domains) cannot be mapped to the unicast DNS protocol.

The DNS stub resolver on 127.0.0.53 provides the full feature set of the local resolver, which includes offering LLMNR/MulticastDNS resolution. The DNS stub resolver on 127.0.0.54 provides a more limited resolver, that operates in "proxy" mode only, i.e. it will pass most DNS messages relatively unmodified to the current upstream DNS servers and back, but not try to process the messages locally, and hence does not validate DNSSEC, or offer up LLMNR/MulticastDNS. (It will translate to DNS-over-TLS communication if needed however.)

The local, configured hostname is resolved to all locally configured IP addresses ordered by their scope, or — if none are configured — the IPv4 address 127.0.0.2 (which is on the local loopback interface) and the IPv6 address ::1 (which is the local host).

The hostnames "localhost" and "localhost.localdomain" as well as any hostname ending in ".localhost" or ".localhost.localdomain" are resolved to the IP addresses 127.0.0.1 and ::1.

The hostname "_gateway" is resolved to all current default routing gateway addresses, ordered by their metric. This assigns a stable hostname to the current gateway, useful for referencing it independently of the current network configuration state.

The hostname "_outbound" is resolved to the local IPv4 and IPv6 addresses that are most likely used for communication with other hosts. This is determined by requesting a routing decision to the configured default gateways from the kernel and then using the local IP addresses selected by this decision. This hostname is only available if there is at least one local default gateway configured. This assigns a stable hostname to the local outbound IP addresses, useful for referencing them independently of the current network configuration state.

The mappings defined in /etc/hosts are resolved to their configured addresses and back, but they will not affect lookups for non-address types (like MX). Support for /etc/hosts may be disabled with ReadEtcHosts=no, see resolved.conf(5).

Names for which synthetic records are generated (the local hostname, "localhost" and "localdomain", local gateway, as listed in the previous section) and addresses configured in /etc/hosts are never routed to the network and a reply is sent immediately.

Single-label names are resolved using LLMNR on all local interfaces where LLMNR is enabled. Lookups for IPv4 addresses are only sent via LLMNR on IPv4, and lookups for IPv6 addresses are only sent via LLMNR on IPv6. Note that lookups for single-label synthesized names are not routed to LLMNR, MulticastDNS or unicast DNS.

Queries for the address records (A and AAAA) of single-label non-synthesized names are resolved via unicast DNS using search domains. For any interface which defines search domains, such look-ups are routed to the servers defined for that interface, suffixed with each of those search domains. When global search domains are defined, such look-ups are routed to the global servers. For each search domain, queries are performed by suffixing the name with each of the search domains in turn. Additionally, lookup of single-label names via unicast DNS may be enabled with the ResolveUnicastSingleLabel=yes setting. The details of which servers are queried and how the final reply is chosen are described below. Note that this means that address queries for single-label names are never sent out to remote DNS servers by default, and resolution is only possible if search domains are defined.

Multi-label names with the domain suffix ".local" are resolved using MulticastDNS on all local interfaces where MulticastDNS is enabled. As with LLMNR, IPv4 address lookups are sent via IPv4 and IPv6 address lookups are sent via IPv6.

Queries for multi-label names are routed via unicast DNS on local interfaces that have a DNS server configured, plus the globally configured DNS servers if there are any. Which interfaces are used is determined by the routing logic based on search and route-only domains, described below. Note that by default, lookups for domains with the ".local" suffix are not routed to DNS servers, unless the domain is specified explicitly as routing or search domain for the DNS server and interface. This means that on networks where the ".local" domain is defined in a site-specific DNS server, explicit search or routing domains need to be configured to make lookups work within this DNS domain. Note that these days, it's generally recommended to avoid defining ".local" in a DNS server, as RFC6762 reserves this domain for exclusive MulticastDNS use.

Address lookups (reverse lookups) are routed similarly to multi-label names, with the exception that addresses from the link-local address range are never routed to unicast DNS and are only resolved using LLMNR and MulticastDNS (when enabled).

If a name to look up matches (that is: is equal to or has as suffix) any of the configured routing domains (search or route-only) of any link, or the globally configured DNS settings, "best matching" routing domain is determined: the matching one with the most labels. The query is then sent to all DNS servers of any links or the globally configured DNS servers associated with this "best matching" routing domain. (Note that more than one link might have this same "best matching" routing domain configured, in which case the query is sent to all of them in parallel).

In case of single-label names, when search domains are defined, the same logic applies, except that the name is first suffixed by each of the search domains in turn. Note that this search logic doesn't apply to any names with at least one dot. Also see the discussion about compatibility with the traditional glibc resolver below.

If a query does not match any configured routing domain (either per-link or global), it is sent to all DNS servers that are configured on links with the DefaultRoute= option set, as well as the globally configured DNS server.

If there is no link configured as DefaultRoute= and no global DNS server configured, one of the compiled-in fallback DNS servers is used.

Otherwise the unicast DNS query fails, as no suitable DNS servers can be determined.

Some names are always resolved internally (see Synthetic Records above). Traditionally they would be resolved by nss-files if provided in /etc/hosts. But note that the details of how a query is constructed are under the control of the client library. nss-dns will first try to resolve names using search domains and even if those queries are routed to systemd-resolved, it will send them out over the network using the usual rules for multi-label name routing ^[1].

Single-label names are not resolved for A and AAAA records using unicast DNS (unless overridden with ResolveUnicastSingleLabel=, see resolved.conf(5)). This is similar to the no-tld-query option being set in resolv.conf(5).

Search domains are not used for suffixing of multi-label names. (Search domains are nevertheless used for lookup routing, for names that were originally specified as single-label or multi-label.) Any name with at least one dot is always interpreted as a FQDN. nss-dns would resolve names both as relative (using search domains) and absolute FQDN names. Some names would be resolved as relative first, and after that query has failed, as absolute, while other names would be resolved in opposite order. The ndots option in /etc/resolv.conf was used to control how many dots the name needs to have to be resolved as relative first. This stub resolver does not implement this at all: multi-label names are only resolved as FQDNs.^[2]

This resolver has a notion of the special ".local" domain used for MulticastDNS, and will not route queries with that suffix to unicast DNS servers unless explicitly configured, see above. Also, reverse lookups for link-local addresses are not sent to unicast DNS servers.

This resolver reads and caches /etc/hosts internally. (In other words, nss-resolve replaces nss-files in addition to nss-dns). Entries in /etc/hosts have highest priority.

This resolver also implements LLMNR and MulticastDNS in addition to the classic unicast DNS protocol, and will resolve single-label names using LLMNR (when enabled) and names ending in ".local" using MulticastDNS (when enabled).

Environment variables $LOCALDOMAIN and $RES_OPTIONS described in resolv.conf(5) are not supported currently.

systemd-resolved maintains the /run/systemd/resolve/stub-resolv.conf file for compatibility with traditional Linux programs. This file lists the 127.0.0.53 DNS stub (see above) as the only DNS server. It also contains a list of search domains that are in use by systemd-resolved. The list of search domains is always kept up-to-date. Note that /run/systemd/resolve/stub-resolv.conf should not be used directly by applications, but only through a symlink from /etc/resolv.conf. This file may be symlinked from /etc/resolv.conf in order to connect all local clients that bypass local DNS APIs to systemd-resolved with correct search domains settings. This mode of operation is recommended.

A static file /usr/lib/systemd/resolv.conf is provided that lists the 127.0.0.53 DNS stub (see above) as only DNS server. This file may be symlinked from /etc/resolv.conf in order to connect all local clients that bypass local DNS APIs to systemd-resolved. This file does not contain any search domains.

systemd-resolved maintains the /run/systemd/resolve/resolv.conf file for compatibility with traditional Linux programs. This file may be symlinked from /etc/resolv.conf and is always kept up-to-date, containing information about all known DNS servers. Note the file format's limitations: it does not know a concept of per-interface DNS servers and hence only contains system-wide DNS server definitions. Note that /run/systemd/resolve/resolv.conf should not be used directly by applications, but only through a symlink from /etc/resolv.conf. If this mode of operation is used local clients that bypass any local DNS API will also bypass systemd-resolved and will talk directly to the known DNS servers.

Alternatively, /etc/resolv.conf may be managed by other packages, in which case systemd-resolved will read it for DNS configuration data. In this mode of operation systemd-resolved is consumer rather than provider of this configuration file.