org.freedesktop.hostname1 — The D-Bus interface of systemd-hostnamed
systemd-hostnamed.service(8) is a system service that can be used to control the hostname and related machine metadata from user programs. This page describes the hostname semantics and the D-Bus interface.
The service exposes the following interfaces on the bus:
node /org/freedesktop/hostname1 { interface org.freedesktop.hostname1 { methods: SetHostname(in s hostname, in b interactive); SetStaticHostname(in s hostname, in b interactive); SetPrettyHostname(in s hostname, in b interactive); SetIconName(in s icon, in b interactive); SetChassis(in s chassis, in b interactive); SetDeployment(in s deployment, in b interactive); SetLocation(in s location, in b interactive); GetProductUUID(in b interactive, out ay uuid); GetHardwareSerial(out s serial); Describe(out s json); properties: readonly s Hostname = '...'; readonly s StaticHostname = '...'; readonly s PrettyHostname = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s DefaultHostname = '...'; readonly s HostnameSource = '...'; readonly s IconName = '...'; readonly s Chassis = '...'; readonly s Deployment = '...'; readonly s Location = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s KernelName = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s KernelRelease = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s KernelVersion = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s OperatingSystemPrettyName = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s OperatingSystemCPEName = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly t OperatingSystemSupportEnd = ...; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s HomeURL = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s HardwareVendor = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s HardwareModel = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s FirmwareVersion = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly s FirmwareVendor = '...'; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly t FirmwareDate = ...; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly ay MachineID = [...]; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly ay BootID = [...]; @org.freedesktop.DBus.Property.EmitsChangedSignal("const") readonly u VSockCID = ...; }; interface org.freedesktop.DBus.Peer { ... }; interface org.freedesktop.DBus.Introspectable { ... }; interface org.freedesktop.DBus.Properties { ... }; };
Whenever the hostname or other metadata is changed via the daemon,
PropertyChanged
signals are sent out to subscribed clients. Changing a hostname
using this interface is authenticated via
polkit.
The StaticHostname
property exposes the "static" hostname configured in
/etc/hostname
. It is not always in sync with the current hostname as returned by the
gethostname(3)
system call. If no static hostname is configured this property will be the empty string.
When systemd(1) or systemd-hostnamed.service(8) set the hostname, this static hostname has the highest priority.
The Hostname
property exposes the actual hostname configured in the kernel via
sethostname(2).
It can be different from the static hostname. This property is never empty.
The PrettyHostname
property exposes the pretty hostname
which is a free-form UTF-8 hostname for presentation to the user. User interfaces should ensure that the
pretty hostname and the static hostname stay in sync. E.g. when the former is "Lennart’s
Computer
" the latter should be "lennarts-computer
". If no pretty hostname is
set this setting will be the empty string. Applications should then find a suitable fallback, such as the
dynamic hostname.
The DefaultHostname
property exposes the default hostname (configured through
os-release(5), or a
fallback set at compilation time).
The HostnameSource
property exposes the origin of the currently configured
hostname. One of "static
" (set from /etc/hostname
),
"transient
" (a non-permanent hostname from an external source),
"default
" (the value from os-release
or the compiled-in
fallback).
The IconName
property exposes the icon name following the
XDG icon naming spec. If not set, information such as the chassis type (see below) is used to find a
suitable fallback icon name (i.e. "computer-laptop
"
vs. "computer-desktop
" is picked based on the chassis information). If no such data is
available, the empty string is returned. In that case an application should fall back to a replacement
icon, for example "computer
". If this property is set to the empty string, the automatic
fallback name selection is enabled again.
The Chassis
property exposes a chassis type, one of the
currently defined chassis types: "desktop
", "laptop
",
"server
", "tablet
", "handset
", as well as the special
chassis types "vm
" and "container
" for virtualized systems. Note that
in most cases the chassis type will be determined automatically from DMI/SMBIOS/ACPI firmware
information. Writing to this setting is hence useful only to override misdetected chassis types, or to
configure the chassis type if it could not be auto-detected. Set this property to the empty string to
reenable the automatic detection of the chassis type from firmware information.
Note that systemd-hostnamed
starts only on request and terminates after a
short idle period. This effectively means that PropertyChanged
messages are not sent
out for changes made directly on the files (as in: administrator edits the files with vi). This is
the intended behavior: manual configuration changes should require manual reloading.
The transient (dynamic) hostname exposed by the Hostname
property maps directly
to the kernel hostname. This hostname should be assumed to be highly dynamic, and hence should be watched
directly, without depending on PropertyChanged
messages from
systemd-hostnamed
. To accomplish this, open
/proc/sys/kernel/hostname
and
poll(3)
for SIGHUP
which is triggered by the kernel every time the hostname changes. Again:
this is special for the transient (dynamic) hostname, and does not apply to the configured (fixed)
hostname.
Applications may read the hostname data directly if hostname change notifications
are not necessary. Use
gethostname(2),
/etc/hostname
(possibly with per-distribution fallbacks), and
machine-info(3)
for that. For more information on these files and syscalls see the respective man pages.
KernelName
, KernelRelease
, and
KernelVersion
expose the kernel name (e.g. "Linux
"), release
(e.g. "5.0.0-11
"), and version (i.e. the build number, e.g. "#11
") as
reported by uname(2).
OperatingSystemPrettyName
, OperatingSystemCPEName
, and
HomeURL
expose the PRETTY_NAME=
, CPE_NAME=
and
HOME_URL=
fields from
os-release(5). The
purpose of those properties is to allow remote clients to access this information over D-Bus. Local
clients can access the information directly.
MachineID
expose the 128bit machine ID, see
machine-id(5) for
details.
BootID
expose the 128bit boot ID, as per
/proc/sys/kernel/random/boot_id
.
VSockCID
exposes the system's local AF_VSOCK
CID (Context
Identifier, i.e. address) for the system, if one is available in the virtual machine environment. Set to
UINT32_MAX
otherwise. See vsock(7) for
details.
OperatingSystemSupportEnd
exposes when the OS' vendor support ends, if this
information is known. It's an unsigned 64bit value, in µs since the UNIX epoch, UTC. If this information
is not known carries the value 2^64-1, i.e. UINT64_MAX
.
HardwareVendor
and HardwareModel
expose information about the
vendor of the hardware of the system. If no such information can be determined these properties are set
to empty strings.
FirmwareVersion
and FirmwareVendor
expose information about
the system's firmware, i.e. a version string and a vendor name. If no such information can be determined
these properties are set to empty strings.
FirmwareDate
exposes the firmware build date, if that information is known. It's
an unsigned 64bit value, in µs since the UNIX epoch, UTC. If not known
UNIT64_MAX
.
SetHostname()
sets the transient (dynamic) hostname, which is used if no
static hostname is set. This value must be an internet-style hostname, 7-bit lowercase ASCII, no
special chars/spaces. An empty string will unset the transient hostname.
SetStaticHostname()
sets the static hostname which is exposed by the
StaticHostname
property. When called with an empty argument, the static
configuration in /etc/hostname
is removed. Since the static hostname has the
highest priority, calling this function usually affects also the Hostname
property
and the effective hostname configured in the kernel.
SetPrettyHostname()
sets the pretty hostname which is exposed by the
PrettyHostname
property.
SetIconName()
, SetChassis()
,
SetDeployment()
, and SetLocation()
set the properties
IconName
(the name of the icon representing for the machine),
Chassis
(the machine form factor), Deployment
(the system
deployment environment), and Location
(physical system location), respectively.
PrettyHostname
, IconName
, Chassis
,
Deployment
, and Location
are stored in
/etc/machine-info
. See
machine-info(5) for
the semantics of those settings.
GetProductUUID()
returns the "product UUID" as exposed by the kernel based
on DMI information in /sys/class/dmi/id/product_uuid
. Reading the file directly
requires root privileges, and this method allows access to unprivileged clients through the polkit
framework.
GetHardwareSerial()
returns the "hardware serial" as exposed by the kernel
based on DMI information. Reading the file directly requires root privileges, and this method allows
access to unprivileged clients through the polkit framework.
Describe()
returns a JSON representation of all properties in one.
The interactive
boolean parameters can be used to control whether polkit
should interactively ask the user for authentication credentials if required.
The polkit action for SetHostname()
is
org.freedesktop.hostname1.set-hostname
. For
SetStaticHostname()
and SetPrettyHostname()
it is
org.freedesktop.hostname1.set-static-hostname
. For
SetIconName()
, SetChassis()
, SetDeployment()
and SetLocation()
it is
org.freedesktop.hostname1.set-machine-info
.
Here are three examples that show how the pretty hostname and the icon name should be used:
When registering DNS-SD services: use the pretty hostname in the service name, and pass the icon name in the TXT data, if there is an icon name. Browsing clients can then show the server icon on each service. This is especially useful for WebDAV applications or UPnP media sharing.
Set the bluetooth name to the pretty hostname.
When your file browser has a "Computer" icon, replace the name with the pretty hostname if set, and the icon with the icon name, if it is set.
To properly handle name lookups with changing local hostnames without having to edit
/etc/hosts
, we recommend using systemd-hostnamed
in combination
with nss-myhostname(3).
Here are some recommendations to follow when generating a static (internet) hostname from a pretty name:
Generate a single DNS label only, not an FQDN. That means no dots allowed. Strip them,
or replace them with "-
".
It's probably safer to not use any non-ASCII chars, even if DNS allows this in some way
these days. In fact, restrict your charset to "a-zA-Z0-9
" and "-
".
Strip other chars, or try to replace them in some smart way with chars from this set, for example
"ä
" → "ae
", and use "-
" as the replacement for all
punctuation characters and whitespace.
Try to avoid creating repeated "-
", as well as "-
" as
the first or last char.
Limit the hostname to 63 chars, which is the length of a DNS label.
If after stripping special chars the empty string is the result, you can pass this
as-is to systemd-hostnamed
in which case it will automatically use a suitable
fallback.
Uppercase characters should be replaced with their lowercase equivalents.
Note that while systemd-hostnamed
applies some checks to the hostname you pass
they are much looser than the recommendations above. For example, systemd-hostnamed
will also accept "_
" in the hostname, but we recommend not using this to avoid clashes
with DNS-SD service types. Also systemd-hostnamed
allows longer hostnames, but
because of the DNS label limitations, we recommend not making use of this.
Here are a couple of example conversions:
"Lennart's PC
" → "lennarts-pc
"
"Müllers Computer
" → "muellers-computer
"
"Voran!
" → "voran
"
"Es war einmal ein Männlein
" → "es-war-einmal-ein-maennlein
"
"Jawoll. Ist doch wahr!
" → "jawoll-ist-doch-wahr
"
"レナート
" → "localhost
"
"...zack!!! zack!...
" → "zack-zack
"
Of course, an already valid internet hostname label you enter and pass through this conversion should stay unmodified, so that users have direct control of it, if they want — by simply ignoring the fact that the pretty hostname is pretty and just edit it as if it was the normal internet name.
Example 1. Introspect org.freedesktop.hostname1
on the bus
$ gdbus introspect --system \ --dest org.freedesktop.hostname1 \ --object-path /org/freedesktop/hostname1
FirmwareVersion
and
GetHardwareSerial()
were added in version 251.
OperatingSystemSupportEnd
,
FirmwareVendor
, and
FirmwareDate
were added in version 253.
MachineID
, BootID
and
VSockCID
were added in version 256.
systemd(1), systemd-hostnamed.service(8), hostnamectl(1), David Zeuthen's original Fedora Feature page about xdg-hostname