If this command is passed, all files and directories marked with f, F, w, d, D, v, p, L, c, b, m in the configuration files are created or written to. Files and directories marked with z, Z, t, T, a, and A have their ownership, access mode and security labels set.

If this command is passed, all files and directories with an age parameter configured will be cleaned up.

If this command is passed, the contents of directories marked with D or R, and files or directories themselves marked with r or R are removed unless an exclusive or shared BSD lock is taken on them (see flock(2)).

If this option is passed, all files and directories declared for creation and marked with the "$" character by the tmpfiles.d/ files specified on the command line will be deleted. Specifically, this acts on all files and directories marked with f, F, d, D, v, q, Q, p, L, c, b, C, w, e. If this switch is used at least one tmpfiles.d/ file (or - for standard input) must be specified on the command line or the invocation will be refused, for safety reasons (as otherwise much of the installed system files might be removed).

The primary usecase for this option is to automatically remove files and directories that originally have been created on behalf of an installed package at package removal time.

It is recommended to first run this command in combination with --dry-run (see below) to verify which files and directories will be deleted.

Warning! This is usually not the command you want! In most cases --remove is what you are looking for.

Added in version 256.

Execute "user" configuration, i.e. tmpfiles.d/ files in user configuration directories.

Added in version 236.

Also execute lines with an exclamation mark. Lines that are not safe to be executed on a running system may be marked in this way. systemd-tmpfiles is executed in early boot with --boot specified and will execute those lines. When invoked again later, it should be called without --boot.

Added in version 209.

Ignore configuration lines pertaining to unknown users or groups. This option is intended to be used in early boot before all users or groups have been created.

Added in version 254.

Process the configuration and print what operations would be performed, but don't actually change anything in the file system.

Added in version 256.

Only apply rules with paths that start with the specified prefix. This option can be specified multiple times.

Added in version 212.

Ignore rules with paths that start with the specified prefix. This option can be specified multiple times.

Added in version 207.

A shortcut for "--exclude-prefix=/dev --exclude-prefix=/proc --exclude-prefix=/run --exclude-prefix=/sys", i.e. exclude the hierarchies typically backed by virtual or memory file systems. This is useful in combination with --root=, if the specified directory tree contains an OS tree without these virtual/memory file systems mounted in, as it is typically not desirable to create any files and directories below these subdirectories if they are supposed to be overmounted during runtime.

Added in version 247.

Takes a directory path as an argument. All paths will be prefixed with the given alternate root path, including config search paths.

When this option is used, the libc Name Service Switch (NSS) is bypassed for resolving users and groups. Instead the files /etc/passwd and /etc/group inside the alternate root are read directly. This means that users/groups not listed in these files will not be resolved, i.e. LDAP NIS and other complex databases are not considered.

Consider combining this with -E to ensure the invocation does not create files or directories below mount points in the OS image operated on that are typically overmounted during runtime.

Added in version 212.

Takes a path to a disk image file or block device node. If specified all operations are applied to file system in the indicated disk image. This is similar to --root= but operates on file systems stored in disk images or block devices. The disk image should either contain just a file system or a set of file systems within a GPT partition table, following the Discoverable Partitions Specification. For further information on supported disk images, see systemd-nspawn(1)'s switch of the same name.

Implies -E.

Added in version 247.

Takes an image policy string as argument, as per systemd.image-policy(7). The policy is enforced when operating on the disk image specified via --image=, see above. If not specified defaults to the "*" policy, i.e. all recognized file systems in the image are used.

When this option is given, one or more positional arguments must be specified. All configuration files found in the directories listed in tmpfiles.d(5) will be read, and the configuration given on the command line will be handled instead of and with the same priority as the configuration file PATH.

This option is intended to be used when package installation scripts are running and files belonging to that package are not yet available on disk, so their contents must be given on the command line, but the admin configuration might already exist and should be given higher priority.

Added in version 238.

Copy the contents of config files to standard output. Before each file, the filename is printed as a comment.

Copy the contents of config files to standard output. Only the "interesting" parts of the configuration files are printed, comments and empty lines are skipped. Before each file, the filename is printed as a comment.

Do not pipe output into a pager.

Print a short help text and exit.

Print a short version string and exit.

The contents of this credential may contain additional lines to operate on. The credential contents should follow the same format as any other tmpfiles.d/ drop-in configuration file. If this credential is passed it is processed after all of the drop-in files read from the file system. The lines in the credential can hence augment existing lines of the OS, but not override them.

Added in version 252.

The maximum log level of emitted messages (messages with a higher log level, i.e. less important ones, will be suppressed). Takes a comma-separated list of values. A value may be either one of (in order of decreasing importance) emerg, alert, crit, err, warning, notice, info, debug, or an integer in the range 0…7. See syslog(3) for more information. Each value may optionally be prefixed with one of console, syslog, kmsg or journal followed by a colon to set the maximum log level for that specific log target (e.g. SYSTEMD_LOG_LEVEL=debug,console:info specifies to log at debug level except when logging to the console which should be at info level). Note that the global maximum log level takes priority over any per target maximum log levels.

A boolean. If true, messages written to the tty will be colored according to priority.

This setting is only useful when messages are written directly to the terminal, because journalctl(1) and other tools that display logs will color messages based on the log level on their own.

A boolean. If true, console log messages will be prefixed with a timestamp.

This setting is only useful when messages are written directly to the terminal or a file, because journalctl(1) and other tools that display logs will attach timestamps based on the entry metadata on their own.

A boolean. If true, messages will be prefixed with a filename and line number in the source code where the message originates.

Note that the log location is often attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.

The destination for log messages. One of console (log to the attached tty), console-prefixed (log to the attached tty but with prefixes encoding the log level and "facility", see syslog(3), kmsg (log to the kernel circular log buffer), journal (log to the journal), journal-or-kmsg (log to the journal if available, and to kmsg otherwise), auto (determine the appropriate log target automatically, the default), null (disable log output).

Pager to use when --no-pager is not given; overrides $PAGER. If neither $SYSTEMD_PAGER nor $PAGER are set, a set of well-known pager implementations are tried in turn, including less(1) and more(1), until one is found. If no pager implementation is discovered no pager is invoked. Setting this environment variable to an empty string or the value "cat" is equivalent to passing --no-pager.

Note: if $SYSTEMD_PAGERSECURE is not set, $SYSTEMD_PAGER (as well as $PAGER) will be silently ignored.

Override the options passed to less (by default "FRSXMK").

Users might want to change two options in particular:

Note that setting the regular $LESS environment variable has no effect for less invocations by systemd tools.

See less(1) for more discussion.

Override the charset passed to less (by default "utf-8", if the invoking terminal is determined to be UTF-8 compatible).

Note that setting the regular $LESSCHARSET environment variable has no effect for less invocations by systemd tools.

Takes a boolean argument. When true, the "secure" mode of the pager is enabled; if false, disabled. If $SYSTEMD_PAGERSECURE is not set at all, secure mode is enabled if the effective UID is not the same as the owner of the login session, see geteuid(2) and sd_pid_get_owner_uid(3). In secure mode, LESSSECURE=1 will be set when invoking the pager, and the pager shall disable commands that open or create new files or start new subprocesses. When $SYSTEMD_PAGERSECURE is not set at all, pagers which are not known to implement secure mode will not be used. (Currently only less(1) implements secure mode.)

Note: when commands are invoked with elevated privileges, for example under sudo(8) or pkexec(1), care must be taken to ensure that unintended interactive features are not enabled. "Secure" mode for the pager may be enabled automatically as describe above. Setting SYSTEMD_PAGERSECURE=0 or not removing it from the inherited environment allows the user to invoke arbitrary commands. Note that if the $SYSTEMD_PAGER or $PAGER variables are to be honoured, $SYSTEMD_PAGERSECURE must be set too. It might be reasonable to completely disable the pager using --no-pager instead.

Takes a boolean argument. When true, systemd and related utilities will use colors in their output, otherwise the output will be monochrome. Additionally, the variable can take one of the following special values: "16", "256" to restrict the use of colors to the base 16 or 256 ANSI colors, respectively. This can be specified to override the automatic decision based on $TERM and what the console is connected to.

The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators supporting this. This can be specified to override the decision that systemd makes based on $TERM and other conditions.