mm_gdbus_sim_get_imsi ()

const gchar *
mm_gdbus_sim_get_imsi (MmGdbusSim *object);

Gets the value of the "Imsi" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sim_dup_imsi() if on another thread.

[skip]

mm_gdbus_sim_dup_imsi ()

gchar *
mm_gdbus_sim_dup_imsi (MmGdbusSim *object);

Gets a copy of the "Imsi" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sim_get_sim_identifier ()

const gchar *
mm_gdbus_sim_get_sim_identifier (MmGdbusSim *object);

Gets the value of the "SimIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sim_dup_sim_identifier() if on another thread.

[skip]

mm_gdbus_sim_dup_sim_identifier ()

gchar *
mm_gdbus_sim_dup_sim_identifier (MmGdbusSim *object);

Gets a copy of the "SimIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sim_get_operator_identifier ()

const gchar *
mm_gdbus_sim_get_operator_identifier (MmGdbusSim *object);

Gets the value of the "OperatorIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sim_dup_operator_identifier() if on another thread.

[skip]

mm_gdbus_sim_dup_operator_identifier ()

gchar *
mm_gdbus_sim_dup_operator_identifier (MmGdbusSim *object);

Gets a copy of the "OperatorIdentifier" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sim_get_operator_name ()

const gchar *
mm_gdbus_sim_get_operator_name (MmGdbusSim *object);

Gets the value of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sim_dup_operator_name() if on another thread.

[skip]

mm_gdbus_sim_dup_operator_name ()

gchar *
mm_gdbus_sim_dup_operator_name (MmGdbusSim *object);

Gets a copy of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sim_get_emergency_numbers ()

const gchar *const *
mm_gdbus_sim_get_emergency_numbers (MmGdbusSim *object);

Gets the value of the "EmergencyNumbers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_sim_dup_emergency_numbers() if on another thread.

[skip]

mm_gdbus_sim_dup_emergency_numbers ()

gchar **
mm_gdbus_sim_dup_emergency_numbers (MmGdbusSim *object);

Gets a copy of the "EmergencyNumbers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_sim_call_send_pin ()

void
mm_gdbus_sim_call_send_pin (MmGdbusSim *proxy,
                            const gchar *arg_pin,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously invokes the SendPin() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_sim_call_send_pin_finish() to get the result of the operation.

See mm_gdbus_sim_call_send_pin_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_send_pin_finish ()

gboolean
mm_gdbus_sim_call_send_pin_finish (MmGdbusSim *proxy,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with mm_gdbus_sim_call_send_pin().

mm_gdbus_sim_call_send_pin_sync ()

gboolean
mm_gdbus_sim_call_send_pin_sync (MmGdbusSim *proxy,
                                 const gchar *arg_pin,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously invokes the SendPin() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_send_pin() for the asynchronous version of this method.

mm_gdbus_sim_call_send_puk ()

void
mm_gdbus_sim_call_send_puk (MmGdbusSim *proxy,
                            const gchar *arg_puk,
                            const gchar *arg_pin,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously invokes the SendPuk() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_sim_call_send_puk_finish() to get the result of the operation.

See mm_gdbus_sim_call_send_puk_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_send_puk_finish ()

gboolean
mm_gdbus_sim_call_send_puk_finish (MmGdbusSim *proxy,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with mm_gdbus_sim_call_send_puk().

mm_gdbus_sim_call_send_puk_sync ()

gboolean
mm_gdbus_sim_call_send_puk_sync (MmGdbusSim *proxy,
                                 const gchar *arg_puk,
                                 const gchar *arg_pin,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously invokes the SendPuk() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_send_puk() for the asynchronous version of this method.

mm_gdbus_sim_call_enable_pin ()

void
mm_gdbus_sim_call_enable_pin (MmGdbusSim *proxy,
                              const gchar *arg_pin,
                              gboolean arg_enabled,
                              GCancellable *cancellable,
                              GAsyncReadyCallback callback,
                              gpointer user_data);

Asynchronously invokes the EnablePin() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_sim_call_enable_pin_finish() to get the result of the operation.

See mm_gdbus_sim_call_enable_pin_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_enable_pin_finish ()

gboolean
mm_gdbus_sim_call_enable_pin_finish (MmGdbusSim *proxy,
                                     GAsyncResult *res,
                                     GError **error);

Finishes an operation started with mm_gdbus_sim_call_enable_pin().

mm_gdbus_sim_call_enable_pin_sync ()

gboolean
mm_gdbus_sim_call_enable_pin_sync (MmGdbusSim *proxy,
                                   const gchar *arg_pin,
                                   gboolean arg_enabled,
                                   GCancellable *cancellable,
                                   GError **error);

Synchronously invokes the EnablePin() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_enable_pin() for the asynchronous version of this method.

mm_gdbus_sim_call_change_pin ()

void
mm_gdbus_sim_call_change_pin (MmGdbusSim *proxy,
                              const gchar *arg_old_pin,
                              const gchar *arg_new_pin,
                              GCancellable *cancellable,
                              GAsyncReadyCallback callback,
                              gpointer user_data);

Asynchronously invokes the ChangePin() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_sim_call_change_pin_finish() to get the result of the operation.

See mm_gdbus_sim_call_change_pin_sync() for the synchronous, blocking version of this method.

mm_gdbus_sim_call_change_pin_finish ()

gboolean
mm_gdbus_sim_call_change_pin_finish (MmGdbusSim *proxy,
                                     GAsyncResult *res,
                                     GError **error);

Finishes an operation started with mm_gdbus_sim_call_change_pin().

mm_gdbus_sim_call_change_pin_sync ()

gboolean
mm_gdbus_sim_call_change_pin_sync (MmGdbusSim *proxy,
                                   const gchar *arg_old_pin,
                                   const gchar *arg_new_pin,
                                   GCancellable *cancellable,
                                   GError **error);

Synchronously invokes the ChangePin() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_sim_call_change_pin() for the asynchronous version of this method.

MmGdbusSim

typedef struct _MmGdbusSim MmGdbusSim;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Sim.

struct MmGdbusSimIface

struct MmGdbusSimIface {
  GTypeInterface parent_iface;

  gboolean (*handle_change_pin) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_old_pin,
    const gchar *arg_new_pin);

  gboolean (*handle_enable_pin) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_pin,
    gboolean arg_enabled);

  gboolean (*handle_send_pin) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_pin);

  gboolean (*handle_send_puk) (
    MmGdbusSim *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_puk,
    const gchar *arg_pin);

  const gchar *const * (*get_emergency_numbers) (MmGdbusSim *object);

  const gchar * (*get_imsi) (MmGdbusSim *object);

  const gchar * (*get_operator_identifier) (MmGdbusSim *object);

  const gchar * (*get_operator_name) (MmGdbusSim *object);

  const gchar * (*get_sim_identifier) (MmGdbusSim *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Sim.

The “emergency-numbers” property

  “emergency-numbers”        GStrv

Represents the D-Bus property "EmergencyNumbers".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSim

Flags: Read / Write

The “imsi” property

  “imsi”                     char *

Represents the D-Bus property "Imsi".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSim

Flags: Read / Write

Default value: NULL

The “operator-identifier” property

  “operator-identifier”      char *

Represents the D-Bus property "OperatorIdentifier".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSim

Flags: Read / Write

Default value: NULL

The “operator-name” property

  “operator-name”            char *

Represents the D-Bus property "OperatorName".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSim

Flags: Read / Write

Default value: NULL

The “sim-identifier” property

  “sim-identifier”           char *

Represents the D-Bus property "SimIdentifier".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusSim

Flags: Read / Write

Default value: NULL

The “handle-change-pin” signal

gboolean
user_function (MmGdbusSim            *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_old_pin,
               char                  *arg_new_pin,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the ChangePin() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_change_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-enable-pin” signal

gboolean
user_function (MmGdbusSim            *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_pin,
               gboolean               arg_enabled,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the EnablePin() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_enable_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-send-pin” signal

gboolean
user_function (MmGdbusSim            *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_pin,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SendPin() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_send_pin() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-send-puk” signal

gboolean
user_function (MmGdbusSim            *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_puk,
               char                  *arg_pin,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SendPuk() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_sim_complete_send_puk() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last