mm_gdbus_modem_cdma_get_cdma1x_registration_state ()

guint
mm_gdbus_modem_cdma_get_cdma1x_registration_state
                               (MmGdbusModemCdma *object);

Gets the value of the "Cdma1xRegistrationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_cdma_get_evdo_registration_state ()

guint
mm_gdbus_modem_cdma_get_evdo_registration_state
                               (MmGdbusModemCdma *object);

Gets the value of the "EvdoRegistrationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_cdma_get_activation_state ()

guint
mm_gdbus_modem_cdma_get_activation_state
                               (MmGdbusModemCdma *object);

Gets the value of the "ActivationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_cdma_get_esn ()

const gchar *
mm_gdbus_modem_cdma_get_esn (MmGdbusModemCdma *object);

Gets the value of the "Esn" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_cdma_dup_esn() if on another thread.

[skip]

mm_gdbus_modem_cdma_dup_esn ()

gchar *
mm_gdbus_modem_cdma_dup_esn (MmGdbusModemCdma *object);

Gets a copy of the "Esn" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_cdma_get_meid ()

const gchar *
mm_gdbus_modem_cdma_get_meid (MmGdbusModemCdma *object);

Gets the value of the "Meid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_cdma_dup_meid() if on another thread.

[skip]

mm_gdbus_modem_cdma_dup_meid ()

gchar *
mm_gdbus_modem_cdma_dup_meid (MmGdbusModemCdma *object);

Gets a copy of the "Meid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_cdma_get_nid ()

guint
mm_gdbus_modem_cdma_get_nid (MmGdbusModemCdma *object);

Gets the value of the "Nid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_cdma_get_sid ()

guint
mm_gdbus_modem_cdma_get_sid (MmGdbusModemCdma *object);

Gets the value of the "Sid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_cdma_call_activate ()

void
mm_gdbus_modem_cdma_call_activate (MmGdbusModemCdma *proxy,
                                   const gchar *arg_carrier_code,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously invokes the Activate() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_cdma_call_activate_finish() to get the result of the operation.

See mm_gdbus_modem_cdma_call_activate_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_cdma_call_activate_finish ()

gboolean
mm_gdbus_modem_cdma_call_activate_finish
                               (MmGdbusModemCdma *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_cdma_call_activate().

mm_gdbus_modem_cdma_call_activate_sync ()

gboolean
mm_gdbus_modem_cdma_call_activate_sync
                               (MmGdbusModemCdma *proxy,
                                const gchar *arg_carrier_code,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Activate() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_cdma_call_activate() for the asynchronous version of this method.

mm_gdbus_modem_cdma_call_activate_manual ()

void
mm_gdbus_modem_cdma_call_activate_manual
                               (MmGdbusModemCdma *proxy,
                                GVariant *arg_properties,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the ActivateManual() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_cdma_call_activate_manual_finish() to get the result of the operation.

See mm_gdbus_modem_cdma_call_activate_manual_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_cdma_call_activate_manual_finish ()

gboolean
mm_gdbus_modem_cdma_call_activate_manual_finish
                               (MmGdbusModemCdma *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_cdma_call_activate_manual().

mm_gdbus_modem_cdma_call_activate_manual_sync ()

gboolean
mm_gdbus_modem_cdma_call_activate_manual_sync
                               (MmGdbusModemCdma *proxy,
                                GVariant *arg_properties,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the ActivateManual() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_cdma_call_activate_manual() for the asynchronous version of this method.

MmGdbusModemCdma

typedef struct _MmGdbusModemCdma MmGdbusModemCdma;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.ModemCdma.

struct MmGdbusModemCdmaIface

struct MmGdbusModemCdmaIface {
  GTypeInterface parent_iface;

  gboolean (*handle_activate) (
    MmGdbusModemCdma *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_carrier_code);

  gboolean (*handle_activate_manual) (
    MmGdbusModemCdma *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_properties);

  guint  (*get_activation_state) (MmGdbusModemCdma *object);

  guint  (*get_cdma1x_registration_state) (MmGdbusModemCdma *object);

  const gchar * (*get_esn) (MmGdbusModemCdma *object);

  guint  (*get_evdo_registration_state) (MmGdbusModemCdma *object);

  const gchar * (*get_meid) (MmGdbusModemCdma *object);

  guint  (*get_nid) (MmGdbusModemCdma *object);

  guint  (*get_sid) (MmGdbusModemCdma *object);

  void (*activation_state_changed) (
    MmGdbusModemCdma *object,
    guint arg_activation_state,
    guint arg_activation_error,
    GVariant *arg_status_changes);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.ModemCdma.

The “activation-state” property

  “activation-state”         guint

Represents the D-Bus property "ActivationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemCdma

Flags: Read / Write

Default value: 0

The “cdma1x-registration-state” property

  “cdma1x-registration-state” guint

Represents the D-Bus property "Cdma1xRegistrationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemCdma

Flags: Read / Write

Default value: 0

The “esn” property

  “esn”                      char *

Represents the D-Bus property "Esn".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemCdma

Flags: Read / Write

Default value: NULL

The “evdo-registration-state” property

  “evdo-registration-state”  guint

Represents the D-Bus property "EvdoRegistrationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemCdma

Flags: Read / Write

Default value: 0

The “meid” property

  “meid”                     char *

Represents the D-Bus property "Meid".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemCdma

Flags: Read / Write

Default value: NULL

The “nid” property

  “nid”                      guint

Represents the D-Bus property "Nid".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemCdma

Flags: Read / Write

Default value: 0

The “sid” property

  “sid”                      guint

Represents the D-Bus property "Sid".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemCdma

Flags: Read / Write

Default value: 0

The “activation-state-changed” signal

void
user_function (MmGdbusModemCdma *object,
               guint             arg_activation_state,
               guint             arg_activation_error,
               GVariant         *arg_status_changes,
               gpointer          user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "ActivationStateChanged" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Flags: Run Last

The “handle-activate” signal

gboolean
user_function (MmGdbusModemCdma      *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_carrier_code,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Activate() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_cdma_complete_activate() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-activate-manual” signal

gboolean
user_function (MmGdbusModemCdma      *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_properties,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the ActivateManual() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_cdma_complete_activate_manual() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last