mm_gdbus_modem_oma_call_accept_network_initiated_session ()

void
mm_gdbus_modem_oma_call_accept_network_initiated_session
                               (MmGdbusModemOma *proxy,
                                guint arg_session_id,
                                gboolean arg_accept,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the AcceptNetworkInitiatedSession() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_oma_call_accept_network_initiated_session_finish() to get the result of the operation.

See mm_gdbus_modem_oma_call_accept_network_initiated_session_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_oma_call_accept_network_initiated_session_finish ()

gboolean
mm_gdbus_modem_oma_call_accept_network_initiated_session_finish
                               (MmGdbusModemOma *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_oma_call_accept_network_initiated_session().

mm_gdbus_modem_oma_call_accept_network_initiated_session_sync ()

gboolean
mm_gdbus_modem_oma_call_accept_network_initiated_session_sync
                               (MmGdbusModemOma *proxy,
                                guint arg_session_id,
                                gboolean arg_accept,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the AcceptNetworkInitiatedSession() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_oma_call_accept_network_initiated_session() for the asynchronous version of this method.

mm_gdbus_modem_oma_call_cancel_session ()

void
mm_gdbus_modem_oma_call_cancel_session
                               (MmGdbusModemOma *proxy,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the CancelSession() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_oma_call_cancel_session_finish() to get the result of the operation.

See mm_gdbus_modem_oma_call_cancel_session_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_oma_call_cancel_session_finish ()

gboolean
mm_gdbus_modem_oma_call_cancel_session_finish
                               (MmGdbusModemOma *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_oma_call_cancel_session().

mm_gdbus_modem_oma_call_cancel_session_sync ()

gboolean
mm_gdbus_modem_oma_call_cancel_session_sync
                               (MmGdbusModemOma *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the CancelSession() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_oma_call_cancel_session() for the asynchronous version of this method.

mm_gdbus_modem_oma_call_setup ()

void
mm_gdbus_modem_oma_call_setup (MmGdbusModemOma *proxy,
                               guint arg_features,
                               GCancellable *cancellable,
                               GAsyncReadyCallback callback,
                               gpointer user_data);

Asynchronously invokes the Setup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_oma_call_setup_finish() to get the result of the operation.

See mm_gdbus_modem_oma_call_setup_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_oma_call_setup_finish ()

gboolean
mm_gdbus_modem_oma_call_setup_finish (MmGdbusModemOma *proxy,
                                      GAsyncResult *res,
                                      GError **error);

Finishes an operation started with mm_gdbus_modem_oma_call_setup().

mm_gdbus_modem_oma_call_setup_sync ()

gboolean
mm_gdbus_modem_oma_call_setup_sync (MmGdbusModemOma *proxy,
                                    guint arg_features,
                                    GCancellable *cancellable,
                                    GError **error);

Synchronously invokes the Setup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_oma_call_setup() for the asynchronous version of this method.

mm_gdbus_modem_oma_call_start_client_initiated_session ()

void
mm_gdbus_modem_oma_call_start_client_initiated_session
                               (MmGdbusModemOma *proxy,
                                guint arg_session_type,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the StartClientInitiatedSession() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_oma_call_start_client_initiated_session_finish() to get the result of the operation.

See mm_gdbus_modem_oma_call_start_client_initiated_session_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_oma_call_start_client_initiated_session_finish ()

gboolean
mm_gdbus_modem_oma_call_start_client_initiated_session_finish
                               (MmGdbusModemOma *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_oma_call_start_client_initiated_session().

mm_gdbus_modem_oma_call_start_client_initiated_session_sync ()

gboolean
mm_gdbus_modem_oma_call_start_client_initiated_session_sync
                               (MmGdbusModemOma *proxy,
                                guint arg_session_type,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the StartClientInitiatedSession() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_oma_call_start_client_initiated_session() for the asynchronous version of this method.

mm_gdbus_modem_oma_get_features ()

guint
mm_gdbus_modem_oma_get_features (MmGdbusModemOma *object);

Gets the value of the "Features" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_oma_get_session_state ()

gint
mm_gdbus_modem_oma_get_session_state (MmGdbusModemOma *object);

Gets the value of the "SessionState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_oma_get_session_type ()

guint
mm_gdbus_modem_oma_get_session_type (MmGdbusModemOma *object);

Gets the value of the "SessionType" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_oma_get_pending_network_initiated_sessions ()

GVariant *
mm_gdbus_modem_oma_get_pending_network_initiated_sessions
                               (MmGdbusModemOma *object);

Gets the value of the "PendingNetworkInitiatedSessions" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_oma_dup_pending_network_initiated_sessions() if on another thread.

[skip]

mm_gdbus_modem_oma_dup_pending_network_initiated_sessions ()

GVariant *
mm_gdbus_modem_oma_dup_pending_network_initiated_sessions
                               (MmGdbusModemOma *object);

Gets a copy of the "PendingNetworkInitiatedSessions" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

MmGdbusModemOma

typedef struct _MmGdbusModemOma MmGdbusModemOma;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Oma.

struct MmGdbusModemOmaIface

struct MmGdbusModemOmaIface {
  GTypeInterface parent_iface;

  gboolean (*handle_accept_network_initiated_session) (
    MmGdbusModemOma *object,
    GDBusMethodInvocation *invocation,
    guint arg_session_id,
    gboolean arg_accept);

  gboolean (*handle_cancel_session) (
    MmGdbusModemOma *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_setup) (
    MmGdbusModemOma *object,
    GDBusMethodInvocation *invocation,
    guint arg_features);

  gboolean (*handle_start_client_initiated_session) (
    MmGdbusModemOma *object,
    GDBusMethodInvocation *invocation,
    guint arg_session_type);

  guint  (*get_features) (MmGdbusModemOma *object);

  GVariant * (*get_pending_network_initiated_sessions) (MmGdbusModemOma *object);

  gint  (*get_session_state) (MmGdbusModemOma *object);

  guint  (*get_session_type) (MmGdbusModemOma *object);

  void (*session_state_changed) (
    MmGdbusModemOma *object,
    gint arg_old_session_state,
    gint arg_new_session_state,
    guint arg_session_state_failed_reason);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Oma.

The “features” property

  “features”                 guint

Represents the D-Bus property "Features".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemOma

Flags: Read / Write

Default value: 0

The “pending-network-initiated-sessions” property

  “pending-network-initiated-sessions” GVariant *

Represents the D-Bus property "PendingNetworkInitiatedSessions".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemOma

Flags: Read / Write

Allowed values: GVariant<a(uu)>

Default value: NULL

The “session-state” property

  “session-state”            int

Represents the D-Bus property "SessionState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemOma

Flags: Read / Write

Default value: 0

The “session-type” property

  “session-type”             guint

Represents the D-Bus property "SessionType".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemOma

Flags: Read / Write

Default value: 0

The “handle-accept-network-initiated-session” signal

gboolean
user_function (MmGdbusModemOma       *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_session_id,
               gboolean               arg_accept,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the AcceptNetworkInitiatedSession() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_oma_complete_accept_network_initiated_session() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-cancel-session” signal

gboolean
user_function (MmGdbusModemOma       *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the CancelSession() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_oma_complete_cancel_session() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-setup” signal

gboolean
user_function (MmGdbusModemOma       *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_features,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Setup() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_oma_complete_setup() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-start-client-initiated-session” signal

gboolean
user_function (MmGdbusModemOma       *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_session_type,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the StartClientInitiatedSession() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_oma_complete_start_client_initiated_session() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “session-state-changed” signal

void
user_function (MmGdbusModemOma *object,
               int              arg_old_session_state,
               int              arg_new_session_state,
               guint            arg_session_state_failed_reason,
               gpointer         user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "SessionStateChanged" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Flags: Run Last