mm_gdbus_modem3gpp_get_registration_state ()

guint
mm_gdbus_modem3gpp_get_registration_state
                               (MmGdbusModem3gpp *object);

Gets the value of the "RegistrationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_imei ()

const gchar *
mm_gdbus_modem3gpp_get_imei (MmGdbusModem3gpp *object);

Gets the value of the "Imei" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_imei() if on another thread.

[skip]

mm_gdbus_modem3gpp_dup_imei ()

gchar *
mm_gdbus_modem3gpp_dup_imei (MmGdbusModem3gpp *object);

Gets a copy of the "Imei" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_operator_code ()

const gchar *
mm_gdbus_modem3gpp_get_operator_code (MmGdbusModem3gpp *object);

Gets the value of the "OperatorCode" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_operator_code() if on another thread.

[skip]

mm_gdbus_modem3gpp_dup_operator_code ()

gchar *
mm_gdbus_modem3gpp_dup_operator_code (MmGdbusModem3gpp *object);

Gets a copy of the "OperatorCode" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_operator_name ()

const gchar *
mm_gdbus_modem3gpp_get_operator_name (MmGdbusModem3gpp *object);

Gets the value of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_operator_name() if on another thread.

[skip]

mm_gdbus_modem3gpp_dup_operator_name ()

gchar *
mm_gdbus_modem3gpp_dup_operator_name (MmGdbusModem3gpp *object);

Gets a copy of the "OperatorName" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_enabled_facility_locks ()

guint
mm_gdbus_modem3gpp_get_enabled_facility_locks
                               (MmGdbusModem3gpp *object);

Gets the value of the "EnabledFacilityLocks" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_subscription_state ()

guint
mm_gdbus_modem3gpp_get_subscription_state
                               (MmGdbusModem3gpp *object);

Gets the value of the "SubscriptionState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_eps_ue_mode_operation ()

guint
mm_gdbus_modem3gpp_get_eps_ue_mode_operation
                               (MmGdbusModem3gpp *object);

Gets the value of the "EpsUeModeOperation" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_pco ()

GVariant *
mm_gdbus_modem3gpp_get_pco (MmGdbusModem3gpp *object);

Gets the value of the "Pco" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_pco() if on another thread.

[skip]

mm_gdbus_modem3gpp_dup_pco ()

GVariant *
mm_gdbus_modem3gpp_dup_pco (MmGdbusModem3gpp *object);

Gets a copy of the "Pco" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_initial_eps_bearer ()

const gchar *
mm_gdbus_modem3gpp_get_initial_eps_bearer
                               (MmGdbusModem3gpp *object);

Gets the value of the "InitialEpsBearer" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_initial_eps_bearer() if on another thread.

[skip]

mm_gdbus_modem3gpp_dup_initial_eps_bearer ()

gchar *
mm_gdbus_modem3gpp_dup_initial_eps_bearer
                               (MmGdbusModem3gpp *object);

Gets a copy of the "InitialEpsBearer" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_get_initial_eps_bearer_settings ()

GVariant *
mm_gdbus_modem3gpp_get_initial_eps_bearer_settings
                               (MmGdbusModem3gpp *object);

Gets the value of the "InitialEpsBearerSettings" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_dup_initial_eps_bearer_settings() if on another thread.

[skip]

mm_gdbus_modem3gpp_dup_initial_eps_bearer_settings ()

GVariant *
mm_gdbus_modem3gpp_dup_initial_eps_bearer_settings
                               (MmGdbusModem3gpp *object);

Gets a copy of the "InitialEpsBearerSettings" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_call_register ()

void
mm_gdbus_modem3gpp_call_register (MmGdbusModem3gpp *proxy,
                                  const gchar *arg_operator_id,
                                  GCancellable *cancellable,
                                  GAsyncReadyCallback callback,
                                  gpointer user_data);

Asynchronously invokes the Register() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_call_register_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_call_register_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_call_register_finish ()

gboolean
mm_gdbus_modem3gpp_call_register_finish
                               (MmGdbusModem3gpp *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_call_register().

mm_gdbus_modem3gpp_call_register_sync ()

gboolean
mm_gdbus_modem3gpp_call_register_sync (MmGdbusModem3gpp *proxy,
                                       const gchar *arg_operator_id,
                                       GCancellable *cancellable,
                                       GError **error);

Synchronously invokes the Register() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_call_register() for the asynchronous version of this method.

mm_gdbus_modem3gpp_call_scan ()

void
mm_gdbus_modem3gpp_call_scan (MmGdbusModem3gpp *proxy,
                              GCancellable *cancellable,
                              GAsyncReadyCallback callback,
                              gpointer user_data);

Asynchronously invokes the Scan() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_call_scan_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_call_scan_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_call_scan_finish ()

gboolean
mm_gdbus_modem3gpp_call_scan_finish (MmGdbusModem3gpp *proxy,
                                     GVariant **out_results,
                                     GAsyncResult *res,
                                     GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_call_scan().

mm_gdbus_modem3gpp_call_scan_sync ()

gboolean
mm_gdbus_modem3gpp_call_scan_sync (MmGdbusModem3gpp *proxy,
                                   GVariant **out_results,
                                   GCancellable *cancellable,
                                   GError **error);

Synchronously invokes the Scan() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_call_scan() for the asynchronous version of this method.

mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation ()

void
mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation
                               (MmGdbusModem3gpp *proxy,
                                guint arg_mode,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SetEpsUeModeOperation() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_finish ()

gboolean
mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_finish
                               (MmGdbusModem3gpp *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation().

mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_sync ()

gboolean
mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_sync
                               (MmGdbusModem3gpp *proxy,
                                guint arg_mode,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetEpsUeModeOperation() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation() for the asynchronous version of this method.

mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings ()

void
mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings
                               (MmGdbusModem3gpp *proxy,
                                GVariant *arg_settings,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SetInitialEpsBearerSettings() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_finish ()

gboolean
mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_finish
                               (MmGdbusModem3gpp *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings().

mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_sync ()

gboolean
mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_sync
                               (MmGdbusModem3gpp *proxy,
                                GVariant *arg_settings,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetInitialEpsBearerSettings() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings() for the asynchronous version of this method.

mm_gdbus_modem3gpp_call_disable_facility_lock ()

void
mm_gdbus_modem3gpp_call_disable_facility_lock
                               (MmGdbusModem3gpp *proxy,
                                GVariant *arg_properties,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the DisableFacilityLock() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_call_disable_facility_lock_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_call_disable_facility_lock_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_call_disable_facility_lock_finish ()

gboolean
mm_gdbus_modem3gpp_call_disable_facility_lock_finish
                               (MmGdbusModem3gpp *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_call_disable_facility_lock().

mm_gdbus_modem3gpp_call_disable_facility_lock_sync ()

gboolean
mm_gdbus_modem3gpp_call_disable_facility_lock_sync
                               (MmGdbusModem3gpp *proxy,
                                GVariant *arg_properties,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the DisableFacilityLock() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_call_disable_facility_lock() for the asynchronous version of this method.

MmGdbusModem3gpp

typedef struct _MmGdbusModem3gpp MmGdbusModem3gpp;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.

struct MmGdbusModem3gppIface

struct MmGdbusModem3gppIface {
  GTypeInterface parent_iface;

  gboolean (*handle_disable_facility_lock) (
    MmGdbusModem3gpp *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_properties);

  gboolean (*handle_register) (
    MmGdbusModem3gpp *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_operator_id);

  gboolean (*handle_scan) (
    MmGdbusModem3gpp *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_set_eps_ue_mode_operation) (
    MmGdbusModem3gpp *object,
    GDBusMethodInvocation *invocation,
    guint arg_mode);

  gboolean (*handle_set_initial_eps_bearer_settings) (
    MmGdbusModem3gpp *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_settings);

  guint  (*get_enabled_facility_locks) (MmGdbusModem3gpp *object);

  guint  (*get_eps_ue_mode_operation) (MmGdbusModem3gpp *object);

  const gchar * (*get_imei) (MmGdbusModem3gpp *object);

  const gchar * (*get_initial_eps_bearer) (MmGdbusModem3gpp *object);

  GVariant * (*get_initial_eps_bearer_settings) (MmGdbusModem3gpp *object);

  const gchar * (*get_operator_code) (MmGdbusModem3gpp *object);

  const gchar * (*get_operator_name) (MmGdbusModem3gpp *object);

  GVariant * (*get_pco) (MmGdbusModem3gpp *object);

  guint  (*get_registration_state) (MmGdbusModem3gpp *object);

  guint  (*get_subscription_state) (MmGdbusModem3gpp *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.

The “enabled-facility-locks” property

  “enabled-facility-locks”   guint

Represents the D-Bus property "EnabledFacilityLocks".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: 0

The “eps-ue-mode-operation” property

  “eps-ue-mode-operation”    guint

Represents the D-Bus property "EpsUeModeOperation".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: 0

The “imei” property

  “imei”                     char *

Represents the D-Bus property "Imei".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: NULL

The “initial-eps-bearer” property

  “initial-eps-bearer”       char *

Represents the D-Bus property "InitialEpsBearer".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: NULL

The “initial-eps-bearer-settings” property

  “initial-eps-bearer-settings” GVariant *

Represents the D-Bus property "InitialEpsBearerSettings".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Allowed values: GVariant<a{sv}>

Default value: NULL

The “operator-code” property

  “operator-code”            char *

Represents the D-Bus property "OperatorCode".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: NULL

The “operator-name” property

  “operator-name”            char *

Represents the D-Bus property "OperatorName".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: NULL

The “pco” property

  “pco”                      GVariant *

Represents the D-Bus property "Pco".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Allowed values: GVariant<a(ubay)>

Default value: NULL

The “registration-state” property

  “registration-state”       guint

Represents the D-Bus property "RegistrationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: 0

The “subscription-state” property

  “subscription-state”       guint

Represents the D-Bus property "SubscriptionState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gpp

Flags: Read / Write

Default value: 0

The “handle-disable-facility-lock” signal

gboolean
user_function (MmGdbusModem3gpp      *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_properties,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the DisableFacilityLock() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_complete_disable_facility_lock() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-register” signal

gboolean
user_function (MmGdbusModem3gpp      *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_operator_id,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Register() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_complete_register() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-scan” signal

gboolean
user_function (MmGdbusModem3gpp      *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Scan() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_complete_scan() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-set-eps-ue-mode-operation” signal

gboolean
user_function (MmGdbusModem3gpp      *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_mode,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetEpsUeModeOperation() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_complete_set_eps_ue_mode_operation() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-set-initial-eps-bearer-settings” signal

gboolean
user_function (MmGdbusModem3gpp      *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_settings,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetInitialEpsBearerSettings() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_complete_set_initial_eps_bearer_settings() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last