mm_gdbus_modem3gpp_ussd_get_state ()

guint
mm_gdbus_modem3gpp_ussd_get_state (MmGdbusModem3gppUssd *object);

Gets the value of the "State" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_ussd_get_network_request ()

const gchar *
mm_gdbus_modem3gpp_ussd_get_network_request
                               (MmGdbusModem3gppUssd *object);

Gets the value of the "NetworkRequest" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_ussd_dup_network_request() if on another thread.

[skip]

mm_gdbus_modem3gpp_ussd_dup_network_request ()

gchar *
mm_gdbus_modem3gpp_ussd_dup_network_request
                               (MmGdbusModem3gppUssd *object);

Gets a copy of the "NetworkRequest" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_ussd_get_network_notification ()

const gchar *
mm_gdbus_modem3gpp_ussd_get_network_notification
                               (MmGdbusModem3gppUssd *object);

Gets the value of the "NetworkNotification" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_ussd_dup_network_notification() if on another thread.

[skip]

mm_gdbus_modem3gpp_ussd_dup_network_notification ()

gchar *
mm_gdbus_modem3gpp_ussd_dup_network_notification
                               (MmGdbusModem3gppUssd *object);

Gets a copy of the "NetworkNotification" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_ussd_call_initiate ()

void
mm_gdbus_modem3gpp_ussd_call_initiate (MmGdbusModem3gppUssd *proxy,
                                       const gchar *arg_command,
                                       GCancellable *cancellable,
                                       GAsyncReadyCallback callback,
                                       gpointer user_data);

Asynchronously invokes the Initiate() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_ussd_call_initiate_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_ussd_call_initiate_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_ussd_call_initiate_finish ()

gboolean
mm_gdbus_modem3gpp_ussd_call_initiate_finish
                               (MmGdbusModem3gppUssd *proxy,
                                gchar **out_reply,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_ussd_call_initiate().

mm_gdbus_modem3gpp_ussd_call_initiate_sync ()

gboolean
mm_gdbus_modem3gpp_ussd_call_initiate_sync
                               (MmGdbusModem3gppUssd *proxy,
                                const gchar *arg_command,
                                gchar **out_reply,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Initiate() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_ussd_call_initiate() for the asynchronous version of this method.

mm_gdbus_modem3gpp_ussd_call_respond ()

void
mm_gdbus_modem3gpp_ussd_call_respond (MmGdbusModem3gppUssd *proxy,
                                      const gchar *arg_response,
                                      GCancellable *cancellable,
                                      GAsyncReadyCallback callback,
                                      gpointer user_data);

Asynchronously invokes the Respond() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_ussd_call_respond_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_ussd_call_respond_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_ussd_call_respond_finish ()

gboolean
mm_gdbus_modem3gpp_ussd_call_respond_finish
                               (MmGdbusModem3gppUssd *proxy,
                                gchar **out_reply,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_ussd_call_respond().

mm_gdbus_modem3gpp_ussd_call_respond_sync ()

gboolean
mm_gdbus_modem3gpp_ussd_call_respond_sync
                               (MmGdbusModem3gppUssd *proxy,
                                const gchar *arg_response,
                                gchar **out_reply,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Respond() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_ussd_call_respond() for the asynchronous version of this method.

mm_gdbus_modem3gpp_ussd_call_cancel ()

void
mm_gdbus_modem3gpp_ussd_call_cancel (MmGdbusModem3gppUssd *proxy,
                                     GCancellable *cancellable,
                                     GAsyncReadyCallback callback,
                                     gpointer user_data);

Asynchronously invokes the Cancel() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_ussd_call_cancel_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_ussd_call_cancel_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_ussd_call_cancel_finish ()

gboolean
mm_gdbus_modem3gpp_ussd_call_cancel_finish
                               (MmGdbusModem3gppUssd *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_ussd_call_cancel().

mm_gdbus_modem3gpp_ussd_call_cancel_sync ()

gboolean
mm_gdbus_modem3gpp_ussd_call_cancel_sync
                               (MmGdbusModem3gppUssd *proxy,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Cancel() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_ussd_call_cancel() for the asynchronous version of this method.

MmGdbusModem3gppUssd

typedef struct _MmGdbusModem3gppUssd MmGdbusModem3gppUssd;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.Ussd.

struct MmGdbusModem3gppUssdIface

struct MmGdbusModem3gppUssdIface {
  GTypeInterface parent_iface;

  gboolean (*handle_cancel) (
    MmGdbusModem3gppUssd *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_initiate) (
    MmGdbusModem3gppUssd *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_command);

  gboolean (*handle_respond) (
    MmGdbusModem3gppUssd *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_response);

  const gchar * (*get_network_notification) (MmGdbusModem3gppUssd *object);

  const gchar * (*get_network_request) (MmGdbusModem3gppUssd *object);

  guint  (*get_state) (MmGdbusModem3gppUssd *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.Ussd.

The “network-notification” property

  “network-notification”     char *

Represents the D-Bus property "NetworkNotification".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gppUssd

Flags: Read / Write

Default value: NULL

The “network-request” property

  “network-request”          char *

Represents the D-Bus property "NetworkRequest".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gppUssd

Flags: Read / Write

Default value: NULL

The “state” property

  “state”                    guint

Represents the D-Bus property "State".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gppUssd

Flags: Read / Write

Default value: 0

The “handle-cancel” signal

gboolean
user_function (MmGdbusModem3gppUssd  *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Cancel() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_ussd_complete_cancel() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-initiate” signal

gboolean
user_function (MmGdbusModem3gppUssd  *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_command,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Initiate() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_ussd_complete_initiate() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-respond” signal

gboolean
user_function (MmGdbusModem3gppUssd  *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_response,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Respond() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_ussd_complete_respond() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last