mm_gdbus_modem_location_get_enabled ()

guint
mm_gdbus_modem_location_get_enabled (MmGdbusModemLocation *object);

Gets the value of the "Enabled" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_get_capabilities ()

guint
mm_gdbus_modem_location_get_capabilities
                               (MmGdbusModemLocation *object);

Gets the value of the "Capabilities" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_get_signals_location ()

gboolean
mm_gdbus_modem_location_get_signals_location
                               (MmGdbusModemLocation *object);

Gets the value of the "SignalsLocation" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_get_location ()

GVariant *
mm_gdbus_modem_location_get_location (MmGdbusModemLocation *object);

Gets the value of the "Location" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_location_dup_location() if on another thread.

[skip]

mm_gdbus_modem_location_dup_location ()

GVariant *
mm_gdbus_modem_location_dup_location (MmGdbusModemLocation *object);

Gets a copy of the "Location" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_dup_supl_server ()

gchar *
mm_gdbus_modem_location_dup_supl_server
                               (MmGdbusModemLocation *object);

Gets a copy of the "SuplServer" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_get_supl_server ()

const gchar *
mm_gdbus_modem_location_get_supl_server
                               (MmGdbusModemLocation *object);

Gets the value of the "SuplServer" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_location_dup_supl_server() if on another thread.

[skip]

mm_gdbus_modem_location_get_gps_refresh_rate ()

guint
mm_gdbus_modem_location_get_gps_refresh_rate
                               (MmGdbusModemLocation *object);

Gets the value of the "GpsRefreshRate" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_get_supported_assistance_data ()

guint
mm_gdbus_modem_location_get_supported_assistance_data
                               (MmGdbusModemLocation *object);

Gets the value of the "SupportedAssistanceData" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_dup_assistance_data_servers ()

gchar **
mm_gdbus_modem_location_dup_assistance_data_servers
                               (MmGdbusModemLocation *object);

Gets a copy of the "AssistanceDataServers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem_location_get_assistance_data_servers ()

const gchar *const *
mm_gdbus_modem_location_get_assistance_data_servers
                               (MmGdbusModemLocation *object);

Gets the value of the "AssistanceDataServers" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem_location_dup_assistance_data_servers() if on another thread.

[skip]

mm_gdbus_modem_location_call_get_location ()

void
mm_gdbus_modem_location_call_get_location
                               (MmGdbusModemLocation *proxy,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the GetLocation() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_location_call_get_location_finish() to get the result of the operation.

See mm_gdbus_modem_location_call_get_location_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_location_call_get_location_finish ()

gboolean
mm_gdbus_modem_location_call_get_location_finish
                               (MmGdbusModemLocation *proxy,
                                GVariant **out_Location,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_location_call_get_location().

mm_gdbus_modem_location_call_get_location_sync ()

gboolean
mm_gdbus_modem_location_call_get_location_sync
                               (MmGdbusModemLocation *proxy,
                                GVariant **out_Location,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the GetLocation() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_location_call_get_location() for the asynchronous version of this method.

mm_gdbus_modem_location_call_setup ()

void
mm_gdbus_modem_location_call_setup (MmGdbusModemLocation *proxy,
                                    guint arg_sources,
                                    gboolean arg_signal_location,
                                    GCancellable *cancellable,
                                    GAsyncReadyCallback callback,
                                    gpointer user_data);

Asynchronously invokes the Setup() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_location_call_setup_finish() to get the result of the operation.

See mm_gdbus_modem_location_call_setup_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_location_call_setup_finish ()

gboolean
mm_gdbus_modem_location_call_setup_finish
                               (MmGdbusModemLocation *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_location_call_setup().

mm_gdbus_modem_location_call_setup_sync ()

gboolean
mm_gdbus_modem_location_call_setup_sync
                               (MmGdbusModemLocation *proxy,
                                guint arg_sources,
                                gboolean arg_signal_location,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Setup() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_location_call_setup() for the asynchronous version of this method.

mm_gdbus_modem_location_call_set_supl_server ()

void
mm_gdbus_modem_location_call_set_supl_server
                               (MmGdbusModemLocation *proxy,
                                const gchar *arg_supl,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SetSuplServer() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_location_call_set_supl_server_finish() to get the result of the operation.

See mm_gdbus_modem_location_call_set_supl_server_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_location_call_set_supl_server_finish ()

gboolean
mm_gdbus_modem_location_call_set_supl_server_finish
                               (MmGdbusModemLocation *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_location_call_set_supl_server().

mm_gdbus_modem_location_call_set_supl_server_sync ()

gboolean
mm_gdbus_modem_location_call_set_supl_server_sync
                               (MmGdbusModemLocation *proxy,
                                const gchar *arg_supl,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetSuplServer() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_location_call_set_supl_server() for the asynchronous version of this method.

mm_gdbus_modem_location_call_inject_assistance_data ()

void
mm_gdbus_modem_location_call_inject_assistance_data
                               (MmGdbusModemLocation *proxy,
                                GVariant *arg_data,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the InjectAssistanceData() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_location_call_inject_assistance_data_finish() to get the result of the operation.

See mm_gdbus_modem_location_call_inject_assistance_data_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_location_call_inject_assistance_data_finish ()

gboolean
mm_gdbus_modem_location_call_inject_assistance_data_finish
                               (MmGdbusModemLocation *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_location_call_inject_assistance_data().

mm_gdbus_modem_location_call_inject_assistance_data_sync ()

gboolean
mm_gdbus_modem_location_call_inject_assistance_data_sync
                               (MmGdbusModemLocation *proxy,
                                GVariant *arg_data,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the InjectAssistanceData() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_location_call_inject_assistance_data() for the asynchronous version of this method.

mm_gdbus_modem_location_call_set_gps_refresh_rate ()

void
mm_gdbus_modem_location_call_set_gps_refresh_rate
                               (MmGdbusModemLocation *proxy,
                                guint arg_rate,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the SetGpsRefreshRate() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem_location_call_set_gps_refresh_rate_finish() to get the result of the operation.

See mm_gdbus_modem_location_call_set_gps_refresh_rate_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_location_call_set_gps_refresh_rate_finish ()

gboolean
mm_gdbus_modem_location_call_set_gps_refresh_rate_finish
                               (MmGdbusModemLocation *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem_location_call_set_gps_refresh_rate().

mm_gdbus_modem_location_call_set_gps_refresh_rate_sync ()

gboolean
mm_gdbus_modem_location_call_set_gps_refresh_rate_sync
                               (MmGdbusModemLocation *proxy,
                                guint arg_rate,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the SetGpsRefreshRate() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem_location_call_set_gps_refresh_rate() for the asynchronous version of this method.

MmGdbusModemLocation

typedef struct _MmGdbusModemLocation MmGdbusModemLocation;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Location.

struct MmGdbusModemLocationIface

struct MmGdbusModemLocationIface {
  GTypeInterface parent_iface;

  gboolean (*handle_get_location) (
    MmGdbusModemLocation *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_inject_assistance_data) (
    MmGdbusModemLocation *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_data);

  gboolean (*handle_set_gps_refresh_rate) (
    MmGdbusModemLocation *object,
    GDBusMethodInvocation *invocation,
    guint arg_rate);

  gboolean (*handle_set_supl_server) (
    MmGdbusModemLocation *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_supl);

  gboolean (*handle_setup) (
    MmGdbusModemLocation *object,
    GDBusMethodInvocation *invocation,
    guint arg_sources,
    gboolean arg_signal_location);

  const gchar *const * (*get_assistance_data_servers) (MmGdbusModemLocation *object);

  guint  (*get_capabilities) (MmGdbusModemLocation *object);

  guint  (*get_enabled) (MmGdbusModemLocation *object);

  guint  (*get_gps_refresh_rate) (MmGdbusModemLocation *object);

  GVariant * (*get_location) (MmGdbusModemLocation *object);

  gboolean  (*get_signals_location) (MmGdbusModemLocation *object);

  const gchar * (*get_supl_server) (MmGdbusModemLocation *object);

  guint  (*get_supported_assistance_data) (MmGdbusModemLocation *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Location.

The “assistance-data-servers” property

  “assistance-data-servers”  GStrv

Represents the D-Bus property "AssistanceDataServers".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

The “capabilities” property

  “capabilities”             guint

Represents the D-Bus property "Capabilities".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

Default value: 0

The “enabled” property

  “enabled”                  guint

Represents the D-Bus property "Enabled".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

Default value: 0

The “gps-refresh-rate” property

  “gps-refresh-rate”         guint

Represents the D-Bus property "GpsRefreshRate".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

Default value: 0

The “location” property

  “location”                 GVariant *

Represents the D-Bus property "Location".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

Allowed values: GVariant<a{uv}>

Default value: NULL

The “signals-location” property

  “signals-location”         gboolean

Represents the D-Bus property "SignalsLocation".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

Default value: FALSE

The “supl-server” property

  “supl-server”              char *

Represents the D-Bus property "SuplServer".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

Default value: NULL

The “supported-assistance-data” property

  “supported-assistance-data” guint

Represents the D-Bus property "SupportedAssistanceData".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModemLocation

Flags: Read / Write

Default value: 0

The “handle-get-location” signal

gboolean
user_function (MmGdbusModemLocation  *object,
               GDBusMethodInvocation *invocation,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the GetLocation() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_location_complete_get_location() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-inject-assistance-data” signal

gboolean
user_function (MmGdbusModemLocation  *object,
               GDBusMethodInvocation *invocation,
               GVariant              *arg_data,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the InjectAssistanceData() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_location_complete_inject_assistance_data() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-set-gps-refresh-rate” signal

gboolean
user_function (MmGdbusModemLocation  *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_rate,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetGpsRefreshRate() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_location_complete_set_gps_refresh_rate() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-set-supl-server” signal

gboolean
user_function (MmGdbusModemLocation  *object,
               GDBusMethodInvocation *invocation,
               char                  *arg_supl,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the SetSuplServer() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_location_complete_set_supl_server() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-setup” signal

gboolean
user_function (MmGdbusModemLocation  *object,
               GDBusMethodInvocation *invocation,
               guint                  arg_sources,
               gboolean               arg_signal_location,
               gpointer               user_data)

Signal emitted when a remote caller is invoking the Setup() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_location_complete_setup() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last