Top |
MmGdbusModem3gppMmGdbusModem3gpp — Generated C code for the org.freedesktop.ModemManager1.Modem.Modem3gpp D-Bus interface |
guint | enabled-facility-locks | Read / Write |
guint | eps-ue-mode-operation | Read / Write |
char * | imei | Read / Write |
char * | initial-eps-bearer | Read / Write |
GVariant * | initial-eps-bearer-settings | Read / Write |
GVariant * | nr5g-registration-settings | Read / Write |
char * | operator-code | Read / Write |
char * | operator-name | Read / Write |
guint | packet-service-state | Read / Write |
GVariant * | pco | Read / Write |
guint | registration-state | Read / Write |
guint | subscription-state | Read / Write |
MmGdbusModem3gpp is implemented by MMModem3gpp, MmGdbusModem3gppProxy and MmGdbusModem3gppSkeleton.
This section contains code for working with the org.freedesktop.ModemManager1.Modem.Modem3gpp D-Bus interface in C.
guint
mm_gdbus_modem3gpp_get_registration_state
(MmGdbusModem3gpp *object
);
Gets the value of the "RegistrationState" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_modem3gpp_get_imei (MmGdbusModem3gpp *object
);
Gets the value of the "Imei" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_modem3gpp_dup_imei()
if on another thread.
[skip]
The property value or NULL
if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_modem3gpp_dup_imei (MmGdbusModem3gpp *object
);
Gets a copy of the "Imei" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_modem3gpp_get_operator_code (MmGdbusModem3gpp *object
);
Gets the value of the "OperatorCode" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_modem3gpp_dup_operator_code()
if on another thread.
[skip]
The property value or NULL
if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_modem3gpp_dup_operator_code (MmGdbusModem3gpp *object
);
Gets a copy of the "OperatorCode" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
const gchar *
mm_gdbus_modem3gpp_get_operator_name (MmGdbusModem3gpp *object
);
Gets the value of the "OperatorName" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_modem3gpp_dup_operator_name()
if on another thread.
[skip]
The property value or NULL
if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_modem3gpp_dup_operator_name (MmGdbusModem3gpp *object
);
Gets a copy of the "OperatorName" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_modem3gpp_get_enabled_facility_locks
(MmGdbusModem3gpp *object
);
Gets the value of the "EnabledFacilityLocks" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_modem3gpp_get_subscription_state
(MmGdbusModem3gpp *object
);
Gets the value of the "SubscriptionState" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
guint
mm_gdbus_modem3gpp_get_eps_ue_mode_operation
(MmGdbusModem3gpp *object
);
Gets the value of the "EpsUeModeOperation" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
GVariant *
mm_gdbus_modem3gpp_get_pco (MmGdbusModem3gpp *object
);
Gets the value of the "Pco" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_modem3gpp_dup_pco()
if on another thread.
[skip]
The property value or NULL
if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
GVariant *
mm_gdbus_modem3gpp_dup_pco (MmGdbusModem3gpp *object
);
Gets a copy of the "Pco" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
The property value or NULL
if the property is not set. The returned value should be freed with g_variant_unref()
.
[transfer full][nullable]
const gchar *
mm_gdbus_modem3gpp_get_initial_eps_bearer
(MmGdbusModem3gpp *object
);
Gets the value of the "InitialEpsBearer" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_modem3gpp_dup_initial_eps_bearer()
if on another thread.
[skip]
The property value or NULL
if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
gchar *
mm_gdbus_modem3gpp_dup_initial_eps_bearer
(MmGdbusModem3gpp *object
);
Gets a copy of the "InitialEpsBearer" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
GVariant *
mm_gdbus_modem3gpp_get_initial_eps_bearer_settings
(MmGdbusModem3gpp *object
);
Gets the value of the "InitialEpsBearerSettings" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_modem3gpp_dup_initial_eps_bearer_settings()
if on another thread.
[skip]
The property value or NULL
if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
GVariant *
mm_gdbus_modem3gpp_dup_initial_eps_bearer_settings
(MmGdbusModem3gpp *object
);
Gets a copy of the "InitialEpsBearerSettings" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
The property value or NULL
if the property is not set. The returned value should be freed with g_variant_unref()
.
[transfer full][nullable]
guint
mm_gdbus_modem3gpp_get_packet_service_state
(MmGdbusModem3gpp *object
);
Gets the value of the "PacketServiceState" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
GVariant *
mm_gdbus_modem3gpp_dup_nr5g_registration_settings
(MmGdbusModem3gpp *object
);
Gets a copy of the "Nr5gRegistrationSettings" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
[skip]
The property value or NULL
if the property is not set. The returned value should be freed with g_variant_unref()
.
[transfer full][nullable]
GVariant *
mm_gdbus_modem3gpp_get_nr5g_registration_settings
(MmGdbusModem3gpp *object
);
Gets the value of the "Nr5gRegistrationSettings" D-Bus property.
Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object
was constructed. Use mm_gdbus_modem3gpp_dup_nr5g_registration_settings()
if on another thread.
[skip]
The property value or NULL
if the property is not set. Do not free the returned value, it belongs to object
.
[transfer none][nullable]
void mm_gdbus_modem3gpp_call_register (MmGdbusModem3gpp *proxy
,const gchar *arg_operator_id
,GCancellable *cancellable
,GAsyncReadyCallback callback
,gpointer user_data
);
Asynchronously invokes the Register()
proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()
).
You can then call mm_gdbus_modem3gpp_call_register_finish()
to get the result of the operation.
See mm_gdbus_modem3gpp_call_register_sync()
for the synchronous, blocking version of this method.
proxy |
||
arg_operator_id |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_modem3gpp_call_register_finish (MmGdbusModem3gpp *proxy
,GAsyncResult *res
,GError **error
);
Finishes an operation started with mm_gdbus_modem3gpp_call_register()
.
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem3gpp_call_register_sync (MmGdbusModem3gpp *proxy
,const gchar *arg_operator_id
,GCancellable *cancellable
,GError **error
);
Synchronously invokes the Register()
proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_register()
for the asynchronous version of this method.
proxy |
||
arg_operator_id |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_modem3gpp_call_scan (MmGdbusModem3gpp *proxy
,GCancellable *cancellable
,GAsyncReadyCallback callback
,gpointer user_data
);
Asynchronously invokes the Scan()
proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()
).
You can then call mm_gdbus_modem3gpp_call_scan_finish()
to get the result of the operation.
See mm_gdbus_modem3gpp_call_scan_sync()
for the synchronous, blocking version of this method.
proxy |
||
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_modem3gpp_call_scan_finish (MmGdbusModem3gpp *proxy
,GVariant **out_results
,GAsyncResult *res
,GError **error
);
Finishes an operation started with mm_gdbus_modem3gpp_call_scan()
.
proxy |
||
out_results |
Return location for return parameter or |
[out][optional] |
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem3gpp_call_scan_sync (MmGdbusModem3gpp *proxy
,GVariant **out_results
,GCancellable *cancellable
,GError **error
);
Synchronously invokes the Scan()
proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_scan()
for the asynchronous version of this method.
proxy |
||
out_results |
Return location for return parameter or |
[out][optional] |
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation (MmGdbusModem3gpp *proxy
,guint arg_mode
,GCancellable *cancellable
,GAsyncReadyCallback callback
,gpointer user_data
);
Asynchronously invokes the SetEpsUeModeOperation()
proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()
).
You can then call mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_finish()
to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_sync()
for the synchronous, blocking version of this method.
proxy |
||
arg_mode |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_finish (MmGdbusModem3gpp *proxy
,GAsyncResult *res
,GError **error
);
Finishes an operation started with mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation()
.
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_sync (MmGdbusModem3gpp *proxy
,guint arg_mode
,GCancellable *cancellable
,GError **error
);
Synchronously invokes the SetEpsUeModeOperation()
proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation()
for the asynchronous version of this method.
proxy |
||
arg_mode |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings (MmGdbusModem3gpp *proxy
,GVariant *arg_settings
,GCancellable *cancellable
,GAsyncReadyCallback callback
,gpointer user_data
);
Asynchronously invokes the SetInitialEpsBearerSettings()
proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()
).
You can then call mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_finish()
to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_sync()
for the synchronous, blocking version of this method.
proxy |
||
arg_settings |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_finish (MmGdbusModem3gpp *proxy
,GAsyncResult *res
,GError **error
);
Finishes an operation started with mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings()
.
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_sync (MmGdbusModem3gpp *proxy
,GVariant *arg_settings
,GCancellable *cancellable
,GError **error
);
Synchronously invokes the SetInitialEpsBearerSettings()
proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings()
for the asynchronous version of this method.
proxy |
||
arg_settings |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_modem3gpp_call_disable_facility_lock (MmGdbusModem3gpp *proxy
,GVariant *arg_properties
,GCancellable *cancellable
,GAsyncReadyCallback callback
,gpointer user_data
);
Asynchronously invokes the DisableFacilityLock()
proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()
).
You can then call mm_gdbus_modem3gpp_call_disable_facility_lock_finish()
to get the result of the operation.
See mm_gdbus_modem3gpp_call_disable_facility_lock_sync()
for the synchronous, blocking version of this method.
proxy |
||
arg_properties |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_modem3gpp_call_disable_facility_lock_finish (MmGdbusModem3gpp *proxy
,GAsyncResult *res
,GError **error
);
Finishes an operation started with mm_gdbus_modem3gpp_call_disable_facility_lock()
.
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem3gpp_call_disable_facility_lock_sync (MmGdbusModem3gpp *proxy
,GVariant *arg_properties
,GCancellable *cancellable
,GError **error
);
Synchronously invokes the DisableFacilityLock()
proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_disable_facility_lock()
for the asynchronous version of this method.
proxy |
||
arg_properties |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_modem3gpp_call_set_packet_service_state (MmGdbusModem3gpp *proxy
,guint arg_state
,GCancellable *cancellable
,GAsyncReadyCallback callback
,gpointer user_data
);
Asynchronously invokes the SetPacketServiceState()
proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()
).
You can then call mm_gdbus_modem3gpp_call_set_packet_service_state_finish()
to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_packet_service_state_sync()
for the synchronous, blocking version of this method.
proxy |
||
arg_state |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_modem3gpp_call_set_packet_service_state_finish (MmGdbusModem3gpp *proxy
,GAsyncResult *res
,GError **error
);
Finishes an operation started with mm_gdbus_modem3gpp_call_set_packet_service_state()
.
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem3gpp_call_set_packet_service_state_sync (MmGdbusModem3gpp *proxy
,guint arg_state
,GCancellable *cancellable
,GError **error
);
Synchronously invokes the SetPacketServiceState()
proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_packet_service_state()
for the asynchronous version of this method.
proxy |
||
arg_state |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
void mm_gdbus_modem3gpp_call_set_nr5g_registration_settings (MmGdbusModem3gpp *proxy
,GVariant *arg_properties
,GCancellable *cancellable
,GAsyncReadyCallback callback
,gpointer user_data
);
Asynchronously invokes the SetNr5gRegistrationSettings()
proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()
).
You can then call mm_gdbus_modem3gpp_call_set_nr5g_registration_settings_finish()
to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_nr5g_registration_settings_sync()
for the synchronous, blocking version of this method.
proxy |
||
arg_properties |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
callback |
A GAsyncReadyCallback to call when the request is satisfied or |
|
user_data |
User data to pass to |
gboolean mm_gdbus_modem3gpp_call_set_nr5g_registration_settings_finish (MmGdbusModem3gpp *proxy
,GAsyncResult *res
,GError **error
);
Finishes an operation started with mm_gdbus_modem3gpp_call_set_nr5g_registration_settings()
.
proxy |
||
res |
The GAsyncResult obtained from the GAsyncReadyCallback passed to |
|
error |
Return location for error or |
gboolean mm_gdbus_modem3gpp_call_set_nr5g_registration_settings_sync (MmGdbusModem3gpp *proxy
,GVariant *arg_properties
,GCancellable *cancellable
,GError **error
);
Synchronously invokes the SetNr5gRegistrationSettings()
proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_nr5g_registration_settings()
for the asynchronous version of this method.
proxy |
||
arg_properties |
Argument to pass with the method invocation. |
|
cancellable |
A GCancellable or |
[nullable] |
error |
Return location for error or |
typedef struct _MmGdbusModem3gpp MmGdbusModem3gpp;
Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.
struct MmGdbusModem3gppIface { GTypeInterface parent_iface; gboolean (*handle_disable_facility_lock) ( MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, GVariant *arg_properties); gboolean (*handle_register) ( MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, const gchar *arg_operator_id); gboolean (*handle_scan) ( MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation); gboolean (*handle_set_eps_ue_mode_operation) ( MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, guint arg_mode); gboolean (*handle_set_initial_eps_bearer_settings) ( MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, GVariant *arg_settings); gboolean (*handle_set_nr5g_registration_settings) ( MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, GVariant *arg_properties); gboolean (*handle_set_packet_service_state) ( MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, guint arg_state); guint (*get_enabled_facility_locks) (MmGdbusModem3gpp *object); guint (*get_eps_ue_mode_operation) (MmGdbusModem3gpp *object); const gchar * (*get_imei) (MmGdbusModem3gpp *object); const gchar * (*get_initial_eps_bearer) (MmGdbusModem3gpp *object); GVariant * (*get_initial_eps_bearer_settings) (MmGdbusModem3gpp *object); GVariant * (*get_nr5g_registration_settings) (MmGdbusModem3gpp *object); const gchar * (*get_operator_code) (MmGdbusModem3gpp *object); const gchar * (*get_operator_name) (MmGdbusModem3gpp *object); guint (*get_packet_service_state) (MmGdbusModem3gpp *object); GVariant * (*get_pco) (MmGdbusModem3gpp *object); guint (*get_registration_state) (MmGdbusModem3gpp *object); guint (*get_subscription_state) (MmGdbusModem3gpp *object); };
Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.
GTypeInterface |
The parent interface. |
|
Handler for the “handle-disable-facility-lock” signal. |
||
Handler for the “handle-register” signal. |
||
Handler for the “handle-scan” signal. |
||
Handler for the “handle-set-eps-ue-mode-operation” signal. |
||
Handler for the “handle-set-initial-eps-bearer-settings” signal. |
||
Handler for the “handle-set-nr5g-registration-settings” signal. |
||
Handler for the “handle-set-packet-service-state” signal. |
||
Getter for the “enabled-facility-locks” property. |
||
Getter for the “eps-ue-mode-operation” property. |
||
Getter for the “imei” property. |
||
Getter for the “initial-eps-bearer” property. |
||
Getter for the “initial-eps-bearer-settings” property. |
||
Getter for the “nr5g-registration-settings” property. |
||
Getter for the “operator-code” property. |
||
Getter for the “operator-name” property. |
||
Getter for the “packet-service-state” property. |
||
Getter for the “pco” property. |
||
Getter for the “registration-state” property. |
||
Getter for the “subscription-state” property. |
“enabled-facility-locks”
property“enabled-facility-locks” guint
Represents the D-Bus property "EnabledFacilityLocks".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: 0
“eps-ue-mode-operation”
property“eps-ue-mode-operation” guint
Represents the D-Bus property "EpsUeModeOperation".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: 0
“imei”
property “imei” char *
Represents the D-Bus property "Imei".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: NULL
“initial-eps-bearer”
property “initial-eps-bearer” char *
Represents the D-Bus property "InitialEpsBearer".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: NULL
“initial-eps-bearer-settings”
property“initial-eps-bearer-settings” GVariant *
Represents the D-Bus property "InitialEpsBearerSettings".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Allowed values: GVariant<a{sv}>
Default value: NULL
“nr5g-registration-settings”
property“nr5g-registration-settings” GVariant *
Represents the D-Bus property "Nr5gRegistrationSettings".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Allowed values: GVariant<a{sv}>
Default value: NULL
“operator-code”
property “operator-code” char *
Represents the D-Bus property "OperatorCode".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: NULL
“operator-name”
property “operator-name” char *
Represents the D-Bus property "OperatorName".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: NULL
“packet-service-state”
property“packet-service-state” guint
Represents the D-Bus property "PacketServiceState".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: 0
“pco”
property“pco” GVariant *
Represents the D-Bus property "Pco".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Allowed values: GVariant<a(ubay)>
Default value: NULL
“registration-state”
property“registration-state” guint
Represents the D-Bus property "RegistrationState".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: 0
“subscription-state”
property“subscription-state” guint
Represents the D-Bus property "SubscriptionState".
Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Owner: MmGdbusModem3gpp
Flags: Read / Write
Default value: 0
“handle-disable-facility-lock”
signalgboolean user_function (MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, GVariant *arg_properties, gpointer user_data)
Signal emitted when a remote caller is invoking the DisableFacilityLock()
If a signal handler returns TRUE
, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem3gpp_complete_disable_facility_lock()
or e.g. g_dbus_method_invocation_return_error()
on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD
error is returned.
object |
||
invocation |
||
arg_properties |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED
or TRUE
if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED
or FALSE
to let other signal handlers run.
Flags: Run Last
“handle-register”
signalgboolean user_function (MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, char *arg_operator_id, gpointer user_data)
Signal emitted when a remote caller is invoking the Register()
If a signal handler returns TRUE
, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem3gpp_complete_register()
or e.g. g_dbus_method_invocation_return_error()
on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD
error is returned.
object |
||
invocation |
||
arg_operator_id |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED
or TRUE
if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED
or FALSE
to let other signal handlers run.
Flags: Run Last
“handle-scan”
signalgboolean user_function (MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, gpointer user_data)
Signal emitted when a remote caller is invoking the Scan()
If a signal handler returns TRUE
, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem3gpp_complete_scan()
or e.g. g_dbus_method_invocation_return_error()
on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD
error is returned.
G_DBUS_METHOD_INVOCATION_HANDLED
or TRUE
if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED
or FALSE
to let other signal handlers run.
Flags: Run Last
“handle-set-eps-ue-mode-operation”
signalgboolean user_function (MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, guint arg_mode, gpointer user_data)
Signal emitted when a remote caller is invoking the SetEpsUeModeOperation()
If a signal handler returns TRUE
, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem3gpp_complete_set_eps_ue_mode_operation()
or e.g. g_dbus_method_invocation_return_error()
on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD
error is returned.
object |
||
invocation |
||
arg_mode |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED
or TRUE
if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED
or FALSE
to let other signal handlers run.
Flags: Run Last
“handle-set-initial-eps-bearer-settings”
signalgboolean user_function (MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, GVariant *arg_settings, gpointer user_data)
Signal emitted when a remote caller is invoking the SetInitialEpsBearerSettings()
If a signal handler returns TRUE
, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem3gpp_complete_set_initial_eps_bearer_settings()
or e.g. g_dbus_method_invocation_return_error()
on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD
error is returned.
object |
||
invocation |
||
arg_settings |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED
or TRUE
if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED
or FALSE
to let other signal handlers run.
Flags: Run Last
“handle-set-nr5g-registration-settings”
signalgboolean user_function (MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, GVariant *arg_properties, gpointer user_data)
Signal emitted when a remote caller is invoking the SetNr5gRegistrationSettings()
If a signal handler returns TRUE
, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem3gpp_complete_set_nr5g_registration_settings()
or e.g. g_dbus_method_invocation_return_error()
on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD
error is returned.
object |
||
invocation |
||
arg_properties |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED
or TRUE
if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED
or FALSE
to let other signal handlers run.
Flags: Run Last
“handle-set-packet-service-state”
signalgboolean user_function (MmGdbusModem3gpp *object, GDBusMethodInvocation *invocation, guint arg_state, gpointer user_data)
Signal emitted when a remote caller is invoking the SetPacketServiceState()
If a signal handler returns TRUE
, it means the signal handler will handle the invocation (e.g. take a reference to invocation
and eventually call mm_gdbus_modem3gpp_complete_set_packet_service_state()
or e.g. g_dbus_method_invocation_return_error()
on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD
error is returned.
object |
||
invocation |
||
arg_state |
Argument passed by remote caller. |
|
user_data |
user data set when the signal handler was connected. |
G_DBUS_METHOD_INVOCATION_HANDLED
or TRUE
if the invocation was handled, G_DBUS_METHOD_INVOCATION_UNHANDLED
or FALSE
to let other signal handlers run.
Flags: Run Last