mm_modem_get_path ()

const gchar *
mm_modem_get_path (MMModem *self);

Gets the DBus path of the MMObject which implements this interface.

[skip]

mm_modem_dup_path ()

gchar *
mm_modem_dup_path (MMModem *self);

Gets a copy of the DBus path of the MMObject object which implements this interface.

mm_modem_get_state ()

MMModemState
mm_modem_get_state (MMModem *self);

Gets the overall state of the MMModem.

mm_modem_get_state_failed_reason ()

MMModemStateFailedReason
mm_modem_get_state_failed_reason (MMModem *self);

Gets the reason specifying why the modem is in MM_MODEM_STATE_FAILED state.

mm_modem_get_power_state ()

MMModemPowerState
mm_modem_get_power_state (MMModem *self);

Gets the power state of the MMModem.

mm_modem_peek_supported_capabilities ()

gboolean
mm_modem_peek_supported_capabilities (MMModem *self,
                                      const MMModemCapability **capabilities,
                                      guint *n_capabilities);

Gets the list of combinations of generic families of access technologies supported by this MMModem.

mm_modem_get_supported_capabilities ()

gboolean
mm_modem_get_supported_capabilities (MMModem *self,
                                     MMModemCapability **capabilities,
                                     guint *n_capabilities);

Gets the list of combinations of generic families of access technologies supported by this MMModem.

mm_modem_get_current_capabilities ()

MMModemCapability
mm_modem_get_current_capabilities (MMModem *self);

Gets the list of generic families of access technologies supported by this MMModem without a firmware reload or reinitialization.

mm_modem_get_manufacturer ()

const gchar *
mm_modem_get_manufacturer (MMModem *self);

Gets the equipment manufacturer, as reported by this MMModem.

mm_modem_dup_manufacturer ()

gchar *
mm_modem_dup_manufacturer (MMModem *self);

Gets a copy of the equipment manufacturer, as reported by this MMModem.

mm_modem_get_model ()

const gchar *
mm_modem_get_model (MMModem *self);

Gets the equipment model, as reported by this MMModem.

mm_modem_dup_model ()

gchar *
mm_modem_dup_model (MMModem *self);

Gets a copy of the equipment model, as reported by this MMModem.

mm_modem_get_revision ()

const gchar *
mm_modem_get_revision (MMModem *self);

Gets the equipment revision, as reported by this MMModem.

mm_modem_dup_revision ()

gchar *
mm_modem_dup_revision (MMModem *self);

Gets a copy of the equipment revision, as reported by this MMModem.

mm_modem_get_drivers ()

const gchar * const  *
mm_modem_get_drivers (MMModem *self);

Gets the Operating System device drivers handling communication with the modem hardware.

mm_modem_dup_drivers ()

gchar **
mm_modem_dup_drivers (MMModem *self);

Gets a copy of the Operating System device driver handling communication with the modem hardware.

mm_modem_get_plugin ()

const gchar *
mm_modem_get_plugin (MMModem *self);

Gets the name of the plugin handling this MMModem.

mm_modem_dup_plugin ()

gchar *
mm_modem_dup_plugin (MMModem *self);

Gets a copy of the name of the plugin handling this MMModem.

mm_modem_get_primary_port ()

const gchar *
mm_modem_get_primary_port (MMModem *self);

Gets the name of the primary port controlling this MMModem.

mm_modem_dup_primary_port ()

gchar *
mm_modem_dup_primary_port (MMModem *self);

Gets a copy of the name of the primary port controlling this MMModem.

mm_modem_peek_ports ()

gboolean
mm_modem_peek_ports (MMModem *self,
                     const MMModemPortInfo **ports,
                     guint *n_ports);

Gets the list of ports in the modem.

mm_modem_get_ports ()

gboolean
mm_modem_get_ports (MMModem *self,
                    MMModemPortInfo **ports,
                    guint *n_ports);

Gets the list of ports in the modem.

mm_modem_get_device ()

const gchar *
mm_modem_get_device (MMModem *self);

Gets the physical modem device reference (ie, USB, PCI, PCMCIA device), which may be dependent upon the operating system.

mm_modem_dup_device ()

gchar *
mm_modem_dup_device (MMModem *self);

Gets a copy of the physical modem device reference (ie, USB, PCI, PCMCIA device), which may be dependent upon the operating system.

mm_modem_get_equipment_identifier ()

const gchar *
mm_modem_get_equipment_identifier (MMModem *self);

Gets the identity of the MMModem.

This will be the IMEI number for GSM devices and the hex-format ESN/MEID for CDMA devices.

mm_modem_dup_equipment_identifier ()

gchar *
mm_modem_dup_equipment_identifier (MMModem *self);

Gets a copy of the identity of the MMModem.

This will be the IMEI number for GSM devices and the hex-format ESN/MEID for CDMA devices.

mm_modem_get_device_identifier ()

const gchar *
mm_modem_get_device_identifier (MMModem *self);

Gets a best-effort device identifier based on various device information like model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties.

This ID is not guaranteed to be unique and may be shared between identical devices with the same firmware, but is intended to be "unique enough" for use as a casual device identifier for various user experience operations.

This is not the device's IMEI or ESN since those may not be available before unlocking the device via a PIN.

mm_modem_dup_device_identifier ()

gchar *
mm_modem_dup_device_identifier (MMModem *self);

Gets a copy of a best-effort device identifier based on various device information like model name, firmware revision, USB/PCI/PCMCIA IDs, and other properties.

This ID is not guaranteed to be unique and may be shared between identical devices with the same firmware, but is intended to be "unique enough" for use as a casual device identifier for various user experience operations.

This is not the device's IMEI or ESN since those may not be available before unlocking the device via a PIN.

mm_modem_get_unlock_required ()

MMModemLock
mm_modem_get_unlock_required (MMModem *self);

Gets current lock state of the MMModem.

mm_modem_peek_unlock_retries ()

MMUnlockRetries *
mm_modem_peek_unlock_retries (MMModem *self);

Gets a MMUnlockRetries object, which provides, for each

number of PIN tries remaining before the code becomes blocked (requiring a PUK) or permanently blocked.

mm_modem_get_unlock_retries ()

MMUnlockRetries *
mm_modem_get_unlock_retries (MMModem *self);

Gets a MMUnlockRetries object, which provides, for each

number of PIN tries remaining before the code becomes blocked (requiring a PUK) or permanently blocked.

mm_modem_get_max_bearers ()

guint
mm_modem_get_max_bearers (MMModem *self);

Gets the maximum number of defined packet data bearers this MMModem supports.

This is not the number of active/connected bearers the modem supports, but simply the number of bearers that may be defined at any given time. For example, POTS and CDMA2000-only devices support only one bearer, while GSM/UMTS devices typically support three or more, and any LTE-capable device (whether LTE-only, GSM/UMTS-capable, and/or CDMA2000-capable) also typically support three or more.

mm_modem_get_max_active_bearers ()

guint
mm_modem_get_max_active_bearers (MMModem *self);

Gets the maximum number of active packet data bearers this MMModem supports.

POTS and CDMA2000-only devices support one active bearer, while GSM/UMTS and LTE-capable devices (including LTE/CDMA devices) typically support at least two active bearers.

mm_modem_get_bearer_paths ()

const gchar * const *
mm_modem_get_bearer_paths (MMModem *self);

Gets the DBus paths of the MMBearer handled in this MMModem.

mm_modem_dup_bearer_paths ()

gchar **
mm_modem_dup_bearer_paths (MMModem *self);

Gets a copy of the DBus paths of the MMBearer handled in this MMModem.

mm_modem_get_own_numbers ()

const gchar *const  *
mm_modem_get_own_numbers (MMModem *self);

Gets the list of numbers (e.g. MSISDN in 3GPP) being currently handled by this modem.

[skip]

mm_modem_dup_own_numbers ()

gchar **
mm_modem_dup_own_numbers (MMModem *self);

Gets a copy of the list of numbers (e.g. MSISDN in 3GPP) being currently handled by this modem.

mm_modem_peek_supported_modes ()

gboolean
mm_modem_peek_supported_modes (MMModem *self,
                               const MMModemModeCombination **modes,
                               guint *n_modes);

Gets the list of supported mode combinations.

mm_modem_get_supported_modes ()

gboolean
mm_modem_get_supported_modes (MMModem *self,
                              MMModemModeCombination **modes,
                              guint *n_modes);

Gets the list of supported mode combinations.

mm_modem_get_current_modes ()

gboolean
mm_modem_get_current_modes (MMModem *self,
                            MMModemMode *allowed,
                            MMModemMode *preferred);

Gets the list of modes specifying the access technologies (eg 2G/3G/4G) the MMModem is currently allowed to use when connecting to a network, as well as the preferred one, if any.

mm_modem_peek_supported_bands ()

gboolean
mm_modem_peek_supported_bands (MMModem *self,
                               const MMModemBand **bands,
                               guint *n_bands);

Gets the list of radio frequency and technology bands supported by the MMModem.

For POTS devices, only MM_MODEM_BAND_ANY will be returned in bands .

mm_modem_get_supported_bands ()

gboolean
mm_modem_get_supported_bands (MMModem *self,
                              MMModemBand **bands,
                              guint *n_bands);

Gets the list of radio frequency and technology bands supported by the MMModem.

For POTS devices, only MM_MODEM_BAND_ANY will be returned in bands .

mm_modem_peek_current_bands ()

gboolean
mm_modem_peek_current_bands (MMModem *self,
                             const MMModemBand **bands,
                             guint *n_bands);

Gets the list of radio frequency and technology bands the MMModem is currently using when connecting to a network.

For POTS devices, only the MM_MODEM_BAND_ANY band is supported.

mm_modem_get_current_bands ()

gboolean
mm_modem_get_current_bands (MMModem *self,
                            MMModemBand **bands,
                            guint *n_bands);

Gets the list of radio frequency and technology bands the MMModem is currently using when connecting to a network.

For POTS devices, only the MM_MODEM_BAND_ANY band is supported.

mm_modem_get_supported_ip_families ()

MMBearerIpFamily
mm_modem_get_supported_ip_families (MMModem *self);

Gets the list of supported IP families.

mm_modem_get_signal_quality ()

guint
mm_modem_get_signal_quality (MMModem *self,
                             gboolean *recent);

Gets the signal quality value in percent (0 - 100) of the dominant access technology the MMModem is using to communicate with the network.

Always 0 for POTS devices.

mm_modem_get_access_technologies ()

MMModemAccessTechnology
mm_modem_get_access_technologies (MMModem *self);

Gets the current network access technology used by the MMModem to communicate with the network.

mm_modem_get_sim_path ()

const gchar *
mm_modem_get_sim_path (MMModem *self);

Gets the DBus path of the MMSim handled in this MMModem.

[skip]

mm_modem_dup_sim_path ()

gchar *
mm_modem_dup_sim_path (MMModem *self);

Gets a copy of the DBus path of the MMSim handled in this MMModem.

mm_modem_get_sim ()

void
mm_modem_get_sim (MMModem *self,
                  GCancellable *cancellable,
                  GAsyncReadyCallback callback,
                  gpointer user_data);

Synchronously gets the MMSim object managed by this MMModem.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_get_sim_finish() to get the result of the operation.

See mm_modem_get_sim_sync() for the synchronous, blocking version of this method.

mm_modem_get_sim_finish ()

MMSim *
mm_modem_get_sim_finish (MMModem *self,
                         GAsyncResult *res,
                         GError **error);

Finishes an operation started with mm_modem_get_sim().

mm_modem_get_sim_sync ()

MMSim *
mm_modem_get_sim_sync (MMModem *self,
                       GCancellable *cancellable,
                       GError **error);

Synchronously gets the MMSim object managed by this MMModem.

The calling thread is blocked until a reply is received. See mm_modem_get_sim() for the asynchronous version of this method.

mm_modem_enable ()

void
mm_modem_enable (MMModem *self,
                 GCancellable *cancellable,
                 GAsyncReadyCallback callback,
                 gpointer user_data);

Asynchronously tries to enable the MMModem. When enabled, the modem's radio is powered on and data sessions, voice calls, location services, and Short Message Service may be available.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_enable_finish() to get the result of the operation.

See mm_modem_enable_sync() for the synchronous, blocking version of this method.

mm_modem_enable_finish ()

gboolean
mm_modem_enable_finish (MMModem *self,
                        GAsyncResult *res,
                        GError **error);

Finishes an operation started with mm_modem_enable().

mm_modem_enable_sync ()

gboolean
mm_modem_enable_sync (MMModem *self,
                      GCancellable *cancellable,
                      GError **error);

Synchronously tries to enable the MMModem. When enabled, the modem's radio is powered on and data sessions, voice calls, location services, and Short Message Service may be available.

The calling thread is blocked until a reply is received. See mm_modem_enable() for the asynchronous version of this method.

mm_modem_disable ()

void
mm_modem_disable (MMModem *self,
                  GCancellable *cancellable,
                  GAsyncReadyCallback callback,
                  gpointer user_data);

Asynchronously tries to disable the MMModem. When disabled, the modem enters low-power state and no network-related operations are available.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_disable_finish() to get the result of the operation.

See mm_modem_disable_sync() for the synchronous, blocking version of this method.

mm_modem_disable_finish ()

gboolean
mm_modem_disable_finish (MMModem *self,
                         GAsyncResult *res,
                         GError **error);

Finishes an operation started with mm_modem_disable().

mm_modem_disable_sync ()

gboolean
mm_modem_disable_sync (MMModem *self,
                       GCancellable *cancellable,
                       GError **error);

Synchronously tries to disable the MMModem. When disabled, the modem enters low-power state and no network-related operations are available.

The calling thread is blocked until a reply is received. See mm_modem_disable() for the asynchronous version of this method.

mm_modem_set_power_state ()

void
mm_modem_set_power_state (MMModem *self,
                          MMModemPowerState state,
                          GCancellable *cancellable,
                          GAsyncReadyCallback callback,
                          gpointer user_data);

Asynchronously sets the power state of the device. This method can only be used while the modem is in MM_MODEM_STATE_DISABLED state.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_set_power_state_finish() to get the result of the operation.

See mm_modem_set_power_state_sync() for the synchronous, blocking version of this method.

mm_modem_set_power_state_finish ()

gboolean
mm_modem_set_power_state_finish (MMModem *self,
                                 GAsyncResult *res,
                                 GError **error);

Finishes an operation started with mm_modem_set_power_state().

mm_modem_set_power_state_sync ()

gboolean
mm_modem_set_power_state_sync (MMModem *self,
                               MMModemPowerState state,
                               GCancellable *cancellable,
                               GError **error);

Synchronously sets the power state of the device. This method can only be used while the modem is in MM_MODEM_STATE_DISABLED state.

The calling thread is blocked until a reply is received. See mm_modem_set_power_state() for the asynchronous version of this method.

mm_modem_set_current_modes ()

void
mm_modem_set_current_modes (MMModem *self,
                            MMModemMode modes,
                            MMModemMode preferred,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously sets the access technologies (e.g. 2G/3G/4G preference) the device is currently allowed to use when connecting to a network.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_set_current_modes_finish() to get the result of the operation.

See mm_modem_set_current_modes_sync() for the synchronous, blocking version of this method.

mm_modem_set_current_modes_finish ()

gboolean
mm_modem_set_current_modes_finish (MMModem *self,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with mm_modem_set_current_modes().

mm_modem_set_current_modes_sync ()

gboolean
mm_modem_set_current_modes_sync (MMModem *self,
                                 MMModemMode modes,
                                 MMModemMode preferred,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously sets the access technologies (e.g. 2G/3G/4G preference) the device is currently allowed to use when connecting to a network.

The calling thread is blocked until a reply is received. See mm_modem_set_current_modes() for the asynchronous version of this method.

mm_modem_set_current_bands ()

void
mm_modem_set_current_bands (MMModem *self,
                            const MMModemBand *bands,
                            guint n_bands,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously sets the radio frequency and technology bands the device is currently allowed to use when connecting to a network.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_set_current_bands_finish() to get the result of the operation.

See mm_modem_set_current_bands_sync() for the synchronous, blocking version of this method.

mm_modem_set_current_bands_finish ()

gboolean
mm_modem_set_current_bands_finish (MMModem *self,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with mm_modem_set_current_bands().

mm_modem_set_current_bands_sync ()

gboolean
mm_modem_set_current_bands_sync (MMModem *self,
                                 const MMModemBand *bands,
                                 guint n_bands,
                                 GCancellable *cancellable,
                                 GError **error);

Synchronously sets the radio frequency and technology bands the device is currently allowed to use when connecting to a network.

The calling thread is blocked until a reply is received. See mm_modem_set_current_bands() for the asynchronous version of this method.

mm_modem_set_current_capabilities ()

void
mm_modem_set_current_capabilities (MMModem *self,
                                   MMModemCapability capabilities,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Asynchronously sets the capabilities of the device. A restart of the modem may be required.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_set_current_capabilities_finish() to get the result of the operation.

See mm_modem_set_current_capabilities_sync() for the synchronous, blocking version of this method.

mm_modem_set_current_capabilities_finish ()

gboolean
mm_modem_set_current_capabilities_finish
                               (MMModem *self,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_modem_set_current_capabilities().

mm_modem_set_current_capabilities_sync ()

gboolean
mm_modem_set_current_capabilities_sync
                               (MMModem *self,
                                MMModemCapability capabilities,
                                GCancellable *cancellable,
                                GError **error);

Synchronously sets the capabilities of the device. A restart of the modem may be required.

The calling thread is blocked until a reply is received. See mm_modem_set_current_capabilities() for the asynchronous version of this method.

mm_modem_reset ()

void
mm_modem_reset (MMModem *self,
                GCancellable *cancellable,
                GAsyncReadyCallback callback,
                gpointer user_data);

Asynchronously clears non-persistent configuration and state, and returns the device to a newly-powered-on state.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_reset_finish() to get the result of the operation.

See mm_modem_reset_sync() for the synchronous, blocking version of this method.

mm_modem_reset_finish ()

gboolean
mm_modem_reset_finish (MMModem *self,
                       GAsyncResult *res,
                       GError **error);

Finishes an operation started with mm_modem_reset().

mm_modem_reset_sync ()

gboolean
mm_modem_reset_sync (MMModem *self,
                     GCancellable *cancellable,
                     GError **error);

Synchronously clears non-persistent configuration and state, and returns the device to a newly-powered-on state.

The calling thread is blocked until a reply is received. See mm_modem_reset() for the asynchronous version of this method.

mm_modem_factory_reset ()

void
mm_modem_factory_reset (MMModem *self,
                        const gchar *code,
                        GCancellable *cancellable,
                        GAsyncReadyCallback callback,
                        gpointer user_data);

Asynchronously clears the modem's configuration (including persistent configuration and state), and returns the device to a factory-default state.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_factory_reset_finish() to get the result of the operation.

See mm_modem_factory_reset_sync() for the synchronous, blocking version of this method.

mm_modem_factory_reset_finish ()

gboolean
mm_modem_factory_reset_finish (MMModem *self,
                               GAsyncResult *res,
                               GError **error);

Finishes an operation started with mm_modem_factory_reset().

mm_modem_factory_reset_sync ()

gboolean
mm_modem_factory_reset_sync (MMModem *self,
                             const gchar *code,
                             GCancellable *cancellable,
                             GError **error);

Synchronously clears the modem's configuration (including persistent configuration and state), and returns the device to a factory-default state.

The calling thread is blocked until a reply is received. See mm_modem_factory_reset() for the asynchronous version of this method.

mm_modem_list_bearers ()

void
mm_modem_list_bearers (MMModem *self,
                       GCancellable *cancellable,
                       GAsyncReadyCallback callback,
                       gpointer user_data);

Asynchronously lists the packet data bearers in the MMModem.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_list_bearers_finish() to get the result of the operation.

See mm_modem_list_bearers_sync() for the synchronous, blocking version of this method.

mm_modem_list_bearers_finish ()

GList *
mm_modem_list_bearers_finish (MMModem *self,
                              GAsyncResult *res,
                              GError **error);

Finishes an operation started with mm_modem_list_bearers().

mm_modem_list_bearers_sync ()

GList *
mm_modem_list_bearers_sync (MMModem *self,
                            GCancellable *cancellable,
                            GError **error);

Synchronously lists the packet data bearers in the MMModem.

The calling thread is blocked until a reply is received. See mm_modem_list_bearers() for the asynchronous version of this method.

mm_modem_create_bearer ()

void
mm_modem_create_bearer (MMModem *self,
                        MMBearerProperties *properties,
                        GCancellable *cancellable,
                        GAsyncReadyCallback callback,
                        gpointer user_data);

Asynchronously creates a new packet data bearer in the MMModem.

This request may fail if the modem does not support additional bearers, if too many bearers are already defined, or if properties are invalid.

See CreateBearer to check which properties may be passed.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_create_bearer_finish() to get the result of the operation.

See mm_modem_create_bearer_sync() for the synchronous, blocking version of this method.

mm_modem_create_bearer_finish ()

MMBearer *
mm_modem_create_bearer_finish (MMModem *self,
                               GAsyncResult *res,
                               GError **error);

Finishes an operation started with mm_modem_create_bearer().

mm_modem_create_bearer_sync ()

MMBearer *
mm_modem_create_bearer_sync (MMModem *self,
                             MMBearerProperties *properties,
                             GCancellable *cancellable,
                             GError **error);

Synchronously creates a new packet data bearer in the MMModem.

This request may fail if the modem does not support additional bearers, if too many bearers are already defined, or if properties are invalid.

See CreateBearer to check which properties may be passed.

The calling thread is blocked until a reply is received. See mm_modem_create_bearer() for the asynchronous version of this method.

mm_modem_delete_bearer ()

void
mm_modem_delete_bearer (MMModem *self,
                        const gchar *bearer,
                        GCancellable *cancellable,
                        GAsyncReadyCallback callback,
                        gpointer user_data);

Asynchronously deletes a given bearer from the MMModem.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_delete_bearer_finish() to get the result of the operation.

See mm_modem_delete_bearer_sync() for the synchronous, blocking version of this method.

mm_modem_delete_bearer_finish ()

gboolean
mm_modem_delete_bearer_finish (MMModem *self,
                               GAsyncResult *res,
                               GError **error);

Finishes an operation started with mm_modem_delete_bearer().

mm_modem_delete_bearer_sync ()

gboolean
mm_modem_delete_bearer_sync (MMModem *self,
                             const gchar *bearer,
                             GCancellable *cancellable,
                             GError **error);

Synchronously deletes a given bearer from the MMModem.

The calling thread is blocked until a reply is received. See mm_modem_delete_bearer() for the asynchronous version of this method.

mm_modem_command ()

void
mm_modem_command (MMModem *self,
                  const gchar *cmd,
                  guint timeout,
                  GCancellable *cancellable,
                  GAsyncReadyCallback callback,
                  gpointer user_data);

Asynchronously runs an AT command in the modem.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_command_finish() to get the result of the operation.

See mm_modem_command_sync() for the synchronous, blocking version of this method.

mm_modem_command_finish ()

gchar *
mm_modem_command_finish (MMModem *self,
                         GAsyncResult *res,
                         GError **error);

Finishes an operation started with mm_modem_command().

mm_modem_command_sync ()

gchar *
mm_modem_command_sync (MMModem *self,
                       const gchar *cmd,
                       guint timeout,
                       GCancellable *cancellable,
                       GError **error);

Synchronously runs an AT command in the modem.

The calling thread is blocked until a reply is received. See mm_modem_command() for the asynchronous version of this method.

mm_modem_port_info_array_free ()

void
mm_modem_port_info_array_free (MMModemPortInfo *array,
                               guint array_size);

Frees an array of MMModemPortInfo values.

struct MMModem

struct MMModem;

The MMModem structure contains private data and should only be accessed using the provided API.

struct MMModemModeCombination

struct MMModemModeCombination {
    MMModemMode allowed;
    MMModemMode preferred;
};

MMModemModeCombination is a simple struct holding a pair of MMModemMode values.

struct MMModemPortInfo

struct MMModemPortInfo {
    gchar *name;
    MMModemPortType type;
};

Information of a given port.