mm_gdbus_modem3gpp_profile_manager_dup_index_field ()

gchar *
mm_gdbus_modem3gpp_profile_manager_dup_index_field
                               (MmGdbusModem3gppProfileManager *object);

Gets a copy of the "IndexField" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

[skip]

mm_gdbus_modem3gpp_profile_manager_get_index_field ()

const gchar *
mm_gdbus_modem3gpp_profile_manager_get_index_field
                               (MmGdbusModem3gppProfileManager *object);

Gets the value of the "IndexField" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where object was constructed. Use mm_gdbus_modem3gpp_profile_manager_dup_index_field() if on another thread.

[skip]

mm_gdbus_modem3gpp_profile_manager_call_delete ()

void
mm_gdbus_modem3gpp_profile_manager_call_delete
                               (MmGdbusModem3gppProfileManager *proxy,
                                GVariant *arg_properties,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the Delete() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_profile_manager_call_delete_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_profile_manager_call_delete_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_profile_manager_call_delete_finish ()

gboolean
mm_gdbus_modem3gpp_profile_manager_call_delete_finish
                               (MmGdbusModem3gppProfileManager *proxy,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_profile_manager_call_delete().

mm_gdbus_modem3gpp_profile_manager_call_delete_sync ()

gboolean
mm_gdbus_modem3gpp_profile_manager_call_delete_sync
                               (MmGdbusModem3gppProfileManager *proxy,
                                GVariant *arg_properties,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Delete() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_profile_manager_call_delete() for the asynchronous version of this method.

mm_gdbus_modem3gpp_profile_manager_call_list ()

void
mm_gdbus_modem3gpp_profile_manager_call_list
                               (MmGdbusModem3gppProfileManager *proxy,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the List() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_profile_manager_call_list_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_profile_manager_call_list_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_profile_manager_call_list_finish ()

gboolean
mm_gdbus_modem3gpp_profile_manager_call_list_finish
                               (MmGdbusModem3gppProfileManager *proxy,
                                GVariant **out_profiles,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_profile_manager_call_list().

mm_gdbus_modem3gpp_profile_manager_call_list_sync ()

gboolean
mm_gdbus_modem3gpp_profile_manager_call_list_sync
                               (MmGdbusModem3gppProfileManager *proxy,
                                GVariant **out_profiles,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the List() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_profile_manager_call_list() for the asynchronous version of this method.

mm_gdbus_modem3gpp_profile_manager_call_set ()

void
mm_gdbus_modem3gpp_profile_manager_call_set
                               (MmGdbusModem3gppProfileManager *proxy,
                                GVariant *arg_requested_properties,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously invokes the Set() D-Bus method on proxy . When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()). You can then call mm_gdbus_modem3gpp_profile_manager_call_set_finish() to get the result of the operation.

See mm_gdbus_modem3gpp_profile_manager_call_set_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem3gpp_profile_manager_call_set_finish ()

gboolean
mm_gdbus_modem3gpp_profile_manager_call_set_finish
                               (MmGdbusModem3gppProfileManager *proxy,
                                GVariant **out_stored_properties,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with mm_gdbus_modem3gpp_profile_manager_call_set().

mm_gdbus_modem3gpp_profile_manager_call_set_sync ()

gboolean
mm_gdbus_modem3gpp_profile_manager_call_set_sync
                               (MmGdbusModem3gppProfileManager *proxy,
                                GVariant *arg_requested_properties,
                                GVariant **out_stored_properties,
                                GCancellable *cancellable,
                                GError **error);

Synchronously invokes the Set() D-Bus method on proxy . The calling thread is blocked until a reply is received.

See mm_gdbus_modem3gpp_profile_manager_call_set() for the asynchronous version of this method.

MmGdbusModem3gppProfileManager

typedef struct _MmGdbusModem3gppProfileManager MmGdbusModem3gppProfileManager;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.ProfileManager.

struct MmGdbusModem3gppProfileManagerIface

struct MmGdbusModem3gppProfileManagerIface {
  GTypeInterface parent_iface;

  gboolean (*handle_delete) (
    MmGdbusModem3gppProfileManager *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_properties);

  gboolean (*handle_list) (
    MmGdbusModem3gppProfileManager *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_set) (
    MmGdbusModem3gppProfileManager *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_requested_properties);

  const gchar * (*get_index_field) (MmGdbusModem3gppProfileManager *object);

  void (*updated) (
    MmGdbusModem3gppProfileManager *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp.ProfileManager.

The “index-field” property

  “index-field”              char *

Represents the D-Bus property "IndexField".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Owner: MmGdbusModem3gppProfileManager

Flags: Read / Write

Default value: NULL

The “handle-delete” signal

gboolean
user_function (MmGdbusModem3gppProfileManager *object,
               GDBusMethodInvocation          *invocation,
               GVariant                       *arg_properties,
               gpointer                        user_data)

Signal emitted when a remote caller is invoking the Delete() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_profile_manager_complete_delete() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-list” signal

gboolean
user_function (MmGdbusModem3gppProfileManager *object,
               GDBusMethodInvocation          *invocation,
               gpointer                        user_data)

Signal emitted when a remote caller is invoking the List() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_profile_manager_complete_list() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “handle-set” signal

gboolean
user_function (MmGdbusModem3gppProfileManager *object,
               GDBusMethodInvocation          *invocation,
               GVariant                       *arg_requested_properties,
               gpointer                        user_data)

Signal emitted when a remote caller is invoking the Set() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem3gpp_profile_manager_complete_set() or e.g. g_dbus_method_invocation_return_error() on it) and no other signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

Flags: Run Last

The “updated” signal

void
user_function (MmGdbusModem3gppProfileManager *object,
               gpointer                        user_data)

On the client-side, this signal is emitted whenever the D-Bus signal "Updated" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

Flags: Run Last