MmGdbusBearer

typedef struct _MmGdbusBearer MmGdbusBearer;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Bearer.

struct MmGdbusBearerIface

struct MmGdbusBearerIface {
  GTypeInterface parent_iface;


  gboolean (*handle_connect) (
    MmGdbusBearer *object,
    GDBusMethodInvocation *invocation);

  gboolean (*handle_disconnect) (
    MmGdbusBearer *object,
    GDBusMethodInvocation *invocation);

  gboolean  (*get_connected) (MmGdbusBearer *object);

  const gchar * (*get_interface) (MmGdbusBearer *object);

  GVariant * (*get_ip4_config) (MmGdbusBearer *object);

  GVariant * (*get_ip6_config) (MmGdbusBearer *object);

  guint  (*get_ip_timeout) (MmGdbusBearer *object);

  GVariant * (*get_properties) (MmGdbusBearer *object);

  gboolean  (*get_suspended) (MmGdbusBearer *object);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Bearer.

mm_gdbus_bearer_get_interface ()

const gchar *       mm_gdbus_bearer_get_interface       (MmGdbusBearer *object);

Gets the value of the "Interface" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_dup_interface ()

gchar *             mm_gdbus_bearer_dup_interface       (MmGdbusBearer *object);

Gets a copy of the "Interface" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_get_ip4_config ()

GVariant *          mm_gdbus_bearer_get_ip4_config      (MmGdbusBearer *object);

Gets the value of the "Ip4Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_dup_ip4_config ()

GVariant *          mm_gdbus_bearer_dup_ip4_config      (MmGdbusBearer *object);

Gets a copy of the "Ip4Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_get_ip6_config ()

GVariant *          mm_gdbus_bearer_get_ip6_config      (MmGdbusBearer *object);

Gets the value of the "Ip6Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_dup_ip6_config ()

GVariant *          mm_gdbus_bearer_dup_ip6_config      (MmGdbusBearer *object);

Gets a copy of the "Ip6Config" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_get_ip_timeout ()

guint               mm_gdbus_bearer_get_ip_timeout      (MmGdbusBearer *object);

Gets the value of the "IpTimeout" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_get_properties ()

GVariant *          mm_gdbus_bearer_get_properties      (MmGdbusBearer *object);

Gets the value of the "Properties" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_dup_properties ()

GVariant *          mm_gdbus_bearer_dup_properties      (MmGdbusBearer *object);

Gets a copy of the "Properties" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_get_connected ()

gboolean            mm_gdbus_bearer_get_connected       (MmGdbusBearer *object);

Gets the value of the "Connected" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_get_suspended ()

gboolean            mm_gdbus_bearer_get_suspended       (MmGdbusBearer *object);

Gets the value of the "Suspended" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_bearer_call_connect ()

void                mm_gdbus_bearer_call_connect        (MmGdbusBearer *proxy,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the Connect() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_bearer_call_connect_finish() to get the result of the operation.

See mm_gdbus_bearer_call_connect_sync() for the synchronous, blocking version of this method.

mm_gdbus_bearer_call_connect_finish ()

gboolean            mm_gdbus_bearer_call_connect_finish (MmGdbusBearer *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_bearer_call_connect().

mm_gdbus_bearer_call_connect_sync ()

gboolean            mm_gdbus_bearer_call_connect_sync   (MmGdbusBearer *proxy,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the Connect() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_bearer_call_connect() for the asynchronous version of this method.

mm_gdbus_bearer_call_disconnect ()

void                mm_gdbus_bearer_call_disconnect     (MmGdbusBearer *proxy,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the Disconnect() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_bearer_call_disconnect_finish() to get the result of the operation.

See mm_gdbus_bearer_call_disconnect_sync() for the synchronous, blocking version of this method.

mm_gdbus_bearer_call_disconnect_finish ()

gboolean            mm_gdbus_bearer_call_disconnect_finish
                                                        (MmGdbusBearer *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_bearer_call_disconnect().

mm_gdbus_bearer_call_disconnect_sync ()

gboolean            mm_gdbus_bearer_call_disconnect_sync
                                                        (MmGdbusBearer *proxy,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the Disconnect() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_bearer_call_disconnect() for the asynchronous version of this method.

The "connected" property

  "connected"                gboolean              : Read / Write

Represents the D-Bus property "Connected".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: FALSE

The "interface" property

  "interface"                gchar*                : Read / Write

Represents the D-Bus property "Interface".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: NULL

The "ip-timeout" property

  "ip-timeout"               guint                 : Read / Write

Represents the D-Bus property "IpTimeout".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: 0

The "ip4-config" property

  "ip4-config"               GVariant*             : Read / Write

Represents the D-Bus property "Ip4Config".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Allowed values: GVariant<a{sv}>

Default value: NULL

The "ip6-config" property

  "ip6-config"               GVariant*             : Read / Write

Represents the D-Bus property "Ip6Config".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Allowed values: GVariant<a{sv}>

Default value: NULL

The "properties" property

  "properties"               GVariant*             : Read / Write

Represents the D-Bus property "Properties".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Allowed values: GVariant<a{sv}>

Default value: NULL

The "suspended" property

  "suspended"                gboolean              : Read / Write

Represents the D-Bus property "Suspended".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: FALSE

The "handle-connect" signal

gboolean            user_function                      (MmGdbusBearer         *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gpointer               user_data)       : Run Last

Signal emitted when a remote caller is invoking the Connect() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_bearer_complete_connect() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

The "handle-disconnect" signal

gboolean            user_function                      (MmGdbusBearer         *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gpointer               user_data)       : Run Last

Signal emitted when a remote caller is invoking the Disconnect() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_bearer_complete_disconnect() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.