MmGdbusModemCdma

typedef struct _MmGdbusModemCdma MmGdbusModemCdma;

Abstract interface type for the D-Bus interface org.freedesktop.ModemManager1.Modem.ModemCdma.

struct MmGdbusModemCdmaIface

struct MmGdbusModemCdmaIface {
  GTypeInterface parent_iface;



  gboolean (*handle_activate) (
    MmGdbusModemCdma *object,
    GDBusMethodInvocation *invocation,
    const gchar *arg_carrier_code);

  gboolean (*handle_activate_manual) (
    MmGdbusModemCdma *object,
    GDBusMethodInvocation *invocation,
    GVariant *arg_properties);

  guint  (*get_activation_state) (MmGdbusModemCdma *object);

  guint  (*get_cdma1x_registration_state) (MmGdbusModemCdma *object);

  const gchar * (*get_esn) (MmGdbusModemCdma *object);

  guint  (*get_evdo_registration_state) (MmGdbusModemCdma *object);

  const gchar * (*get_meid) (MmGdbusModemCdma *object);

  guint  (*get_nid) (MmGdbusModemCdma *object);

  guint  (*get_sid) (MmGdbusModemCdma *object);

  void (*activation_state_changed) (
    MmGdbusModemCdma *object,
    guint arg_activation_state,
    guint arg_activation_error,
    GVariant *arg_status_changes);
};

Virtual table for the D-Bus interface org.freedesktop.ModemManager1.Modem.ModemCdma.

mm_gdbus_modem_cdma_get_cdma1x_registration_state ()

guint               mm_gdbus_modem_cdma_get_cdma1x_registration_state
                                                        (MmGdbusModemCdma *object);

Gets the value of the "Cdma1xRegistrationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_get_evdo_registration_state ()

guint               mm_gdbus_modem_cdma_get_evdo_registration_state
                                                        (MmGdbusModemCdma *object);

Gets the value of the "EvdoRegistrationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_get_activation_state ()

guint               mm_gdbus_modem_cdma_get_activation_state
                                                        (MmGdbusModemCdma *object);

Gets the value of the "ActivationState" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_get_esn ()

const gchar *       mm_gdbus_modem_cdma_get_esn         (MmGdbusModemCdma *object);

Gets the value of the "Esn" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_dup_esn ()

gchar *             mm_gdbus_modem_cdma_dup_esn         (MmGdbusModemCdma *object);

Gets a copy of the "Esn" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_get_meid ()

const gchar *       mm_gdbus_modem_cdma_get_meid        (MmGdbusModemCdma *object);

Gets the value of the "Meid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_dup_meid ()

gchar *             mm_gdbus_modem_cdma_dup_meid        (MmGdbusModemCdma *object);

Gets a copy of the "Meid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_get_nid ()

guint               mm_gdbus_modem_cdma_get_nid         (MmGdbusModemCdma *object);

Gets the value of the "Nid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_get_sid ()

guint               mm_gdbus_modem_cdma_get_sid         (MmGdbusModemCdma *object);

Gets the value of the "Sid" D-Bus property.

Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.

mm_gdbus_modem_cdma_call_activate ()

void                mm_gdbus_modem_cdma_call_activate   (MmGdbusModemCdma *proxy,
                                                         const gchar *arg_carrier_code,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the Activate() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_cdma_call_activate_finish() to get the result of the operation.

See mm_gdbus_modem_cdma_call_activate_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_cdma_call_activate_finish ()

gboolean            mm_gdbus_modem_cdma_call_activate_finish
                                                        (MmGdbusModemCdma *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_modem_cdma_call_activate().

mm_gdbus_modem_cdma_call_activate_sync ()

gboolean            mm_gdbus_modem_cdma_call_activate_sync
                                                        (MmGdbusModemCdma *proxy,
                                                         const gchar *arg_carrier_code,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the Activate() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_modem_cdma_call_activate() for the asynchronous version of this method.

mm_gdbus_modem_cdma_call_activate_manual ()

void                mm_gdbus_modem_cdma_call_activate_manual
                                                        (MmGdbusModemCdma *proxy,
                                                         GVariant *arg_properties,
                                                         GCancellable *cancellable,
                                                         GAsyncReadyCallback callback,
                                                         gpointer user_data);

Asynchronously invokes the ActivateManual() D-Bus method on proxy. When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_gdbus_modem_cdma_call_activate_manual_finish() to get the result of the operation.

See mm_gdbus_modem_cdma_call_activate_manual_sync() for the synchronous, blocking version of this method.

mm_gdbus_modem_cdma_call_activate_manual_finish ()

gboolean            mm_gdbus_modem_cdma_call_activate_manual_finish
                                                        (MmGdbusModemCdma *proxy,
                                                         GAsyncResult *res,
                                                         GError **error);

Finishes an operation started with mm_gdbus_modem_cdma_call_activate_manual().

mm_gdbus_modem_cdma_call_activate_manual_sync ()

gboolean            mm_gdbus_modem_cdma_call_activate_manual_sync
                                                        (MmGdbusModemCdma *proxy,
                                                         GVariant *arg_properties,
                                                         GCancellable *cancellable,
                                                         GError **error);

Synchronously invokes the ActivateManual() D-Bus method on proxy. The calling thread is blocked until a reply is received.

See mm_gdbus_modem_cdma_call_activate_manual() for the asynchronous version of this method.

The "activation-state" property

  "activation-state"         guint                 : Read / Write

Represents the D-Bus property "ActivationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: 0

The "cdma1x-registration-state" property

  "cdma1x-registration-state" guint                 : Read / Write

Represents the D-Bus property "Cdma1xRegistrationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: 0

The "esn" property

  "esn"                      gchar*                : Read / Write

Represents the D-Bus property "Esn".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: NULL

The "evdo-registration-state" property

  "evdo-registration-state"  guint                 : Read / Write

Represents the D-Bus property "EvdoRegistrationState".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: 0

The "meid" property

  "meid"                     gchar*                : Read / Write

Represents the D-Bus property "Meid".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: NULL

The "nid" property

  "nid"                      guint                 : Read / Write

Represents the D-Bus property "Nid".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: 0

The "sid" property

  "sid"                      guint                 : Read / Write

Represents the D-Bus property "Sid".

Since the D-Bus property for this GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.

Default value: 0

The "activation-state-changed" signal

void                user_function                      (MmGdbusModemCdma *object,
                                                        guint             arg_activation_state,
                                                        guint             arg_activation_error,
                                                        GVariant         *arg_status_changes,
                                                        gpointer          user_data)                 : Run Last

On the client-side, this signal is emitted whenever the D-Bus signal "ActivationStateChanged" is received.

On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.

The "handle-activate" signal

gboolean            user_function                      (MmGdbusModemCdma      *object,
                                                        GDBusMethodInvocation *invocation,
                                                        gchar                 *arg_carrier_code,
                                                        gpointer               user_data)             : Run Last

Signal emitted when a remote caller is invoking the Activate() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_cdma_complete_activate() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.

The "handle-activate-manual" signal

gboolean            user_function                      (MmGdbusModemCdma      *object,
                                                        GDBusMethodInvocation *invocation,
                                                        GVariant              *arg_properties,
                                                        gpointer               user_data)           : Run Last

Signal emitted when a remote caller is invoking the ActivateManual() D-Bus method.

If a signal handler returns TRUE, it means the signal handler will handle the invocation (e.g. take a reference to invocation and eventually call mm_gdbus_modem_cdma_complete_activate_manual() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the G_DBUS_ERROR_UNKNOWN_METHOD error is returned.