libmm-glib Reference Manual: MMBearer

MMBearer

MMBearer — The Bearer interface

Functions

const gchar *	mm_bearer_get_path ()
gchar *	mm_bearer_dup_path ()
const gchar *	mm_bearer_get_interface ()
gchar *	mm_bearer_dup_interface ()
gboolean	mm_bearer_get_connected ()
gboolean	mm_bearer_get_suspended ()
guint	mm_bearer_get_ip_timeout ()
MMBearerIpConfig *	mm_bearer_peek_ipv4_config ()
MMBearerIpConfig *	mm_bearer_get_ipv4_config ()
MMBearerIpConfig *	mm_bearer_peek_ipv6_config ()
MMBearerIpConfig *	mm_bearer_get_ipv6_config ()
MMBearerProperties *	mm_bearer_peek_properties ()
MMBearerProperties *	mm_bearer_get_properties ()
void	mm_bearer_connect ()
gboolean	mm_bearer_connect_finish ()
gboolean	mm_bearer_connect_sync ()
void	mm_bearer_disconnect ()
gboolean	mm_bearer_disconnect_finish ()
gboolean	mm_bearer_disconnect_sync ()

Types and Values

struct

MMBearer

Object Hierarchy

    GObject
    ╰── GDBusProxy
        ╰── MmGdbusBearerProxy
            ╰── MMBearer

Implemented Interfaces

MMBearer implements GDBusInterface, GInitable, GAsyncInitable and MmGdbusBearer.

Description

The MMBearer is an object providing access to the methods, signals and properties of the Bearer interface.

When the bearer is exposed and available in the bus, it is ensured that at least this interface is also available.

Functions

mm_bearer_get_path ()

const gchar *
mm_bearer_get_path (MMBearer *self);

Gets the DBus path of the MMBearer object.

Parameters

self

A MMBearer.

Returns

The DBus path of the MMBearer object.

[transfer none]

mm_bearer_dup_path ()

gchar *
mm_bearer_dup_path (MMBearer *self);

Gets a copy of the DBus path of the MMBearer object.

Parameters

self

A MMBearer.

Returns

The DBus path of the MMBearer object. The returned value should be freed with g_free().

[transfer full]

mm_bearer_get_interface ()

const gchar *
mm_bearer_get_interface (MMBearer *self);

Gets the operating system name for the network data interface that provides packet data using this MMBearer. This will only be available once the MMBearer is in connected state.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_bearer_dup_interface() if on another thread.

Parameters

self

A MMBearer.

Returns

The name of the interface, or NULL if it couldn't be retrieved.

[transfer none]

mm_bearer_dup_interface ()

gchar *
mm_bearer_dup_interface (MMBearer *self);

Gets a copy of the operating system name for the network data interface that provides packet data using this MMBearer. This will only be available once the MMBearer is in connected state.

Parameters

self

A MMBearer.

Returns

The name of the interface, or NULL if it couldn't be retrieved. The returned value should be freed with g_free().

[transfer full]

mm_bearer_get_connected ()

gboolean
mm_bearer_get_connected (MMBearer *self);

Checks whether or not the MMBearer is connected and thus whether packet data communication is possible.

Parameters

self

A MMBearer.

Returns

TRUE if the MMBearer is connected, FALSE otherwise.

mm_bearer_get_suspended ()

gboolean
mm_bearer_get_suspended (MMBearer *self);

Checks whether or not the MMBearer is suspended (but not deactivated) while the device is handling other communications, like a voice call.

Parameters

self

A MMBearer.

Returns

TRUE if packet data service is suspended in the MMBearer, FALSE otherwise.

mm_bearer_get_ip_timeout ()

guint
mm_bearer_get_ip_timeout (MMBearer *self);

Gets the maximum time to wait for the bearer to retrieve a valid IP address.

Parameters

self

A MMBearer.

Returns

The IP timeout, or 0 if no specific one given.

mm_bearer_peek_ipv4_config ()

MMBearerIpConfig *
mm_bearer_peek_ipv4_config (MMBearer *self);

Gets a MMBearerIpConfig object specifying the IPv4 configuration to use in the bearer.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_bearer_get_ipv4_config() if on another thread.

Parameters

self

A MMBearer.

Returns

A MMBearerIpConfig. Do not free the returned value, it belongs to self .

[transfer none]

mm_bearer_get_ipv4_config ()

MMBearerIpConfig *
mm_bearer_get_ipv4_config (MMBearer *self);

Gets a MMBearerIpConfig object specifying the IPv4 configuration to use in the bearer.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_bearer_get_ipv4_config() again to get a new MMBearerIpConfig with the new values.

Parameters

self

A MMBearer.

Returns

A MMBearerIpConfig that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_bearer_peek_ipv6_config ()

MMBearerIpConfig *
mm_bearer_peek_ipv6_config (MMBearer *self);

Gets a MMBearerIpConfig object specifying the IPv6 configuration to use in the bearer.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_bearer_get_ipv6_config() if on another thread.

Parameters

self

A MMBearer.

Returns

A MMBearerIpConfig. Do not free the returned value, it belongs to self .

[transfer none]

mm_bearer_get_ipv6_config ()

MMBearerIpConfig *
mm_bearer_get_ipv6_config (MMBearer *self);

Gets a MMBearerIpConfig object specifying the IPv6 configuration to use in the bearer.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_bearer_get_ipv6_config() again to get a new MMBearerIpConfig with the new values.

Parameters

self

A MMBearer.

Returns

A MMBearerIpConfig that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_bearer_peek_properties ()

MMBearerProperties *
mm_bearer_peek_properties (MMBearer *self);

Gets a MMBearerProperties object specifying the properties which were used to create the bearer.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_bearer_get_properties() if on another thread.

Parameters

self

A MMBearer.

Returns

A MMBearerProperties. Do not free the returned value, it belongs to self .

[transfer none]

mm_bearer_get_properties ()

MMBearerProperties *
mm_bearer_get_properties (MMBearer *self);

Gets a MMBearerProperties object specifying the properties which were used to create the bearer.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_bearer_get_properties() again to get a new MMBearerProperties with the new values.

Parameters

self

A MMBearer.

Returns

A MMBearerProperties that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_bearer_connect ()

void
mm_bearer_connect (MMBearer *self,
                   GCancellable *cancellable,
                   GAsyncReadyCallback callback,
                   gpointer user_data);

Asynchronously requests activation of a packet data connection with the network using this MMBearer properties.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_bearer_connect_finish() to get the result of the operation.

See mm_bearer_connect_sync() for the synchronous, blocking version of this method.

Parameters

self	A MMBearer.
cancellable	A GCancellable or `NULL`.	[allow-none]
callback	A GAsyncReadyCallback to call when the request is satisfied or `NULL`.
user_data	User data to pass to `callback` .

mm_bearer_connect_finish ()

gboolean
mm_bearer_connect_finish (MMBearer *self,
                          GAsyncResult *res,
                          GError **error);

Finishes an operation started with mm_bearer_connect().

Parameters

self	A MMBearer.
res	The GAsyncResult obtained from the GAsyncReadyCallback passed to `mm_bearer_connect()`.
error	Return location for error or `NULL`.

Returns

TRUE if the operation succeded, FALSE if error is set.

mm_bearer_connect_sync ()

gboolean
mm_bearer_connect_sync (MMBearer *self,
                        GCancellable *cancellable,
                        GError **error);

Synchronously requests activation of a packet data connection with the network using this MMBearer properties.

The calling thread is blocked until a reply is received. See mm_bearer_connect() for the asynchronous version of this method.

Parameters

self	A MMBearer.
cancellable	A GCancellable or `NULL`.	[allow-none]
error	Return location for error or `NULL`.

Returns

TRUE if the operation succeded, FALSE if error is set.

mm_bearer_disconnect ()

void
mm_bearer_disconnect (MMBearer *self,
                      GCancellable *cancellable,
                      GAsyncReadyCallback callback,
                      gpointer user_data);

Synchronously requests disconnection and deactivation of the packet data connection.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_bearer_disconnect_finish() to get the result of the operation.

See mm_bearer_disconnect_sync() for the synchronous, blocking version of this method.

Parameters

self	A MMBearer.
cancellable	A GCancellable or `NULL`.	[allow-none]
callback	A GAsyncReadyCallback to call when the request is satisfied or `NULL`.
user_data	User data to pass to `callback` .

mm_bearer_disconnect_finish ()

gboolean
mm_bearer_disconnect_finish (MMBearer *self,
                             GAsyncResult *res,
                             GError **error);

Finishes an operation started with mm_bearer_disconnect().

Parameters

self	A MMBearer.
res	The GAsyncResult obtained from the GAsyncReadyCallback passed to `mm_bearer_disconnect()`.
error	Return location for error or `NULL`.

Returns

TRUE if the operation succeded, FALSE if error is set.

mm_bearer_disconnect_sync ()

gboolean
mm_bearer_disconnect_sync (MMBearer *self,
                           GCancellable *cancellable,
                           GError **error);

Synchronously requests disconnection and deactivation of the packet data connection.

The calling thread is blocked until a reply is received. See mm_bearer_disconnect() for the asynchronous version of this method.

Parameters

self	A MMBearer.
cancellable	A GCancellable or `NULL`.	[allow-none]
error	Return location for error or `NULL`.

Returns

TRUE if the operation succeded, FALSE if error is set.

Types and Values

struct MMBearer

struct MMBearer;

The MMBearer structure contains private data and should only be accessed using the provided API.