libmm-glib Reference Manual: MMModemSignal

MMModemSignal

MMModemSignal — The extended Signal interface

Functions

const gchar *	mm_modem_signal_get_path ()
gchar *	mm_modem_signal_dup_path ()
guint	mm_modem_signal_get_rate ()
MMSignal *	mm_modem_signal_peek_cdma ()
MMSignal *	mm_modem_signal_get_cdma ()
MMSignal *	mm_modem_signal_peek_evdo ()
MMSignal *	mm_modem_signal_get_evdo ()
MMSignal *	mm_modem_signal_peek_gsm ()
MMSignal *	mm_modem_signal_get_gsm ()
MMSignal *	mm_modem_signal_peek_umts ()
MMSignal *	mm_modem_signal_get_umts ()
MMSignal *	mm_modem_signal_peek_lte ()
MMSignal *	mm_modem_signal_get_lte ()
void	mm_modem_signal_setup ()
gboolean	mm_modem_signal_setup_finish ()
gboolean	mm_modem_signal_setup_sync ()

Types and Values

struct

MMModemSignal

Object Hierarchy

    GObject
    ╰── GDBusProxy
        ╰── MmGdbusModemSignalProxy
            ╰── MMModemSignal

Implemented Interfaces

MMModemSignal implements GDBusInterface, GInitable, GAsyncInitable and MmGdbusModemSignal.

Description

The MMModemSignal is an object providing access to the methods, signals and properties of the Signal interface.

The Signal interface is exposed whenever a modem has extended signal retrieval capabilities.

Functions

mm_modem_signal_get_path ()

const gchar *
mm_modem_signal_get_path (MMModemSignal *self);

Gets the DBus path of the MMObject which implements this interface.

Parameters

self

A MMModemSignal.

Returns

The DBus path of the MMObject object.

[transfer none]

mm_modem_signal_dup_path ()

gchar *
mm_modem_signal_dup_path (MMModemSignal *self);

Gets a copy of the DBus path of the MMObject object which implements this interface.

Parameters

self

A MMModemSignal.

Returns

The DBus path of the MMObject. The returned value should be freed with g_free().

[transfer full]

mm_modem_signal_get_rate ()

guint
mm_modem_signal_get_rate (MMModemSignal *self);

Gets the currently configured refresh rate.

Parameters

self

A MMModemSignal.

Returns

the refresh rate, in seconds.

mm_modem_signal_peek_cdma ()

MMSignal *
mm_modem_signal_peek_cdma (MMModemSignal *self);

Gets a MMSignal object specifying the CDMA signal information.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_modem_signal_get_cdma() if on another thread.

Parameters

self

A MMModem.

Returns

A MMSignal. Do not free the returned value, it belongs to self .

[transfer none]

mm_modem_signal_get_cdma ()

MMSignal *
mm_modem_signal_get_cdma (MMModemSignal *self);

Gets a MMSignal object specifying the CDMA signal information.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_modem_signal_get_cdma() again to get a new MMSignal with the new values.

Parameters

self

A MMModem.

Returns

A MMSignal that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_modem_signal_peek_evdo ()

MMSignal *
mm_modem_signal_peek_evdo (MMModemSignal *self);

Gets a MMSignal object specifying the EV-DO signal information.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_modem_signal_get_evdo() if on another thread.

Parameters

self

A MMModem.

Returns

A MMSignal. Do not free the returned value, it belongs to self .

[transfer none]

mm_modem_signal_get_evdo ()

MMSignal *
mm_modem_signal_get_evdo (MMModemSignal *self);

Gets a MMSignal object specifying the EV-DO signal information.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_modem_signal_get_evdo() again to get a new MMSignal with the new values.

Parameters

self

A MMModem.

Returns

A MMSignal that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_modem_signal_peek_gsm ()

MMSignal *
mm_modem_signal_peek_gsm (MMModemSignal *self);

Gets a MMSignal object specifying the GSM signal information.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_modem_signal_get_gsm() if on another thread.

Parameters

self

A MMModem.

Returns

A MMSignal. Do not free the returned value, it belongs to self .

[transfer none]

mm_modem_signal_get_gsm ()

MMSignal *
mm_modem_signal_get_gsm (MMModemSignal *self);

Gets a MMSignal object specifying the GSM signal information.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_modem_signal_get_gsm() again to get a new MMSignal with the new values.

Parameters

self

A MMModem.

Returns

A MMSignal that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_modem_signal_peek_umts ()

MMSignal *
mm_modem_signal_peek_umts (MMModemSignal *self);

Gets a MMSignal object specifying the UMTS signal information.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_modem_signal_get_umts() if on another thread.

Parameters

self

A MMModem.

Returns

A MMSignal. Do not free the returned value, it belongs to self .

[transfer none]

mm_modem_signal_get_umts ()

MMSignal *
mm_modem_signal_get_umts (MMModemSignal *self);

Gets a MMSignal object specifying the UMTS signal information.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_modem_signal_get_umts() again to get a new MMSignal with the new values.

Parameters

self

A MMModem.

Returns

A MMSignal that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_modem_signal_peek_lte ()

MMSignal *
mm_modem_signal_peek_lte (MMModemSignal *self);

Gets a MMSignal object specifying the LTE signal information.

The returned value is only valid until the property changes so it is only safe to use this function on the thread where self was constructed. Use mm_modem_signal_get_lte() if on another thread.

Parameters

self

A MMModem.

Returns

A MMSignal. Do not free the returned value, it belongs to self .

[transfer none]

mm_modem_signal_get_lte ()

MMSignal *
mm_modem_signal_get_lte (MMModemSignal *self);

Gets a MMSignal object specifying the LTE signal information.

The values reported by self are not updated when the values in the interface change. Instead, the client is expected to call mm_modem_signal_get_lte() again to get a new MMSignal with the new values.

Parameters

self

A MMModem.

Returns

A MMSignal that must be freed with g_object_unref() or NULL if unknown.

[transfer full]

mm_modem_signal_setup ()

void
mm_modem_signal_setup (MMModemSignal *self,
                       guint rate,
                       GCancellable *cancellable,
                       GAsyncReadyCallback callback,
                       gpointer user_data);

Asynchronously setups the extended signal quality retrieval.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from. You can then call mm_modem_signal_setup_finish() to get the result of the operation.

See mm_modem_signal_setup_sync() for the synchronous, blocking version of this method.

Parameters

self	A MMModemSignal.
rate	Rate to use when refreshing signal values.
cancellable	A GCancellable or `NULL`.	[allow-none]
callback	A GAsyncReadyCallback to call when the request is satisfied or `NULL`.
user_data	User data to pass to `callback` .

mm_modem_signal_setup_finish ()

gboolean
mm_modem_signal_setup_finish (MMModemSignal *self,
                              GAsyncResult *res,
                              GError **error);

Finishes an operation started with mm_modem_signal_setup().

Parameters

self	A MMModemSignal.
res	The GAsyncResult obtained from the GAsyncReadyCallback passed to `mm_modem_signal_setup()`.
error	Return location for error or `NULL`.

Returns

TRUE if the setup was successful, FALSE if error is set.

mm_modem_signal_setup_sync ()

gboolean
mm_modem_signal_setup_sync (MMModemSignal *self,
                            guint rate,
                            GCancellable *cancellable,
                            GError **error);

Synchronously setups the extended signal quality retrieval.

The calling thread is blocked until a reply is received. See mm_modem_signal_setup() for the asynchronous version of this method.

Parameters

self	A MMModemSignal.
rate	Rate to use when refreshing signal values.
cancellable	A GCancellable or `NULL`.	[allow-none]
error	Return location for error or `NULL`.

Returns

TRUE if the setup was successful, FALSE if error is set.

Types and Values

struct MMModemSignal

struct MMModemSignal;

The MMModemSignal structure contains private data and should only be accessed using the provided API.