qmi_message_new ()

QmiMessage *
qmi_message_new (QmiService service,
                 guint8 client_id,
                 guint16 transaction_id,
                 guint16 message_id);

Create a new QmiMessage with the specified parameters.

Note that transaction_id must be less than G_MAXUINT8 if service is QMI_SERVICE_CTL.

Since: 1.0

qmi_message_new_from_raw ()

QmiMessage *
qmi_message_new_from_raw (GByteArray *raw,
                          GError **error);

Create a new QmiMessage from the given raw data buffer.

Whenever a complete QMI message is read, its raw data gets removed from the raw buffer.

Since: 1.0

qmi_message_response_new ()

QmiMessage *
qmi_message_response_new (QmiMessage *request,
                          QmiProtocolError error);

Create a new response QmiMessage for the specified request .

Since: 1.8

qmi_message_ref ()

QmiMessage *
qmi_message_ref (QmiMessage *self);

Atomically increments the reference count of self by one.

Since: 1.0

qmi_message_unref ()

void
qmi_message_unref (QmiMessage *self);

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.0

qmi_message_is_request ()

gboolean
qmi_message_is_request (QmiMessage *self);

Checks whether the given QmiMessage is a request.

Since: 1.8

qmi_message_is_response ()

gboolean
qmi_message_is_response (QmiMessage *self);

Checks whether the given QmiMessage is a response.

Since: 1.0

qmi_message_is_indication ()

gboolean
qmi_message_is_indication (QmiMessage *self);

Checks whether the given QmiMessage is an indication.

Since: 1.0

qmi_message_get_service ()

QmiService
qmi_message_get_service (QmiMessage *self);

Gets the service corresponding to the given QmiMessage.

Since: 1.0

qmi_message_get_client_id ()

guint8
qmi_message_get_client_id (QmiMessage *self);

Gets the client ID of the message.

Since: 1.0

qmi_message_get_transaction_id ()

guint16
qmi_message_get_transaction_id (QmiMessage *self);

Gets the transaction ID of the message.

Since: 1.0

qmi_message_get_message_id ()

guint16
qmi_message_get_message_id (QmiMessage *self);

Gets the ID of the message.

Since: 1.0

qmi_message_get_length ()

gsize
qmi_message_get_length (QmiMessage *self);

Gets the length of the raw data corresponding to the given QmiMessage.

Since: 1.0

qmi_message_get_raw ()

const guint8 *
qmi_message_get_raw (QmiMessage *self,
                     gsize *length,
                     GError **error);

Gets the raw data buffer of the QmiMessage.

Since: 1.0

qmi_message_get_version_introduced_full ()

gboolean
qmi_message_get_version_introduced_full
                               (QmiMessage *self,
                                QmiMessageContext *context,
                                guint *major,
                                guint *minor);

Gets, if known, the service version in which the given message was first introduced.

The lookup of the version may be specific to the context provided, e.g. for vendor-specific messages.

If no context given, the behavior is the same as qmi_message_get_version_introduced().

Since: 1.18

qmi_message_tlv_write_init ()

gsize
qmi_message_tlv_write_init (QmiMessage *self,
                            guint8 type,
                            GError **error);

Starts building a new TLV in the QmiMessage.

In order to finish adding the TLV, qmi_message_tlv_write_complete() needs to be called.

If any error happens adding fields on the TLV, the previous state can be recovered using qmi_message_tlv_write_reset().

Since: 1.12

qmi_message_tlv_write_reset ()

void
qmi_message_tlv_write_reset (QmiMessage *self,
                             gsize tlv_offset);

Removes the TLV being currently added.

Since: 1.12

qmi_message_tlv_write_complete ()

gboolean
qmi_message_tlv_write_complete (QmiMessage *self,
                                gsize tlv_offset,
                                GError **error);

Completes building a TLV in the QmiMessage.

In case of error the TLV will be reseted; i.e. there is no need to explicitly call qmi_message_tlv_write_reset().

Since: 1.12

qmi_message_tlv_write_guint8 ()

gboolean
qmi_message_tlv_write_guint8 (QmiMessage *self,
                              guint8 in,
                              GError **error);

Appends an unsigned byte to the TLV being built.

Since: 1.12

qmi_message_tlv_write_gint8 ()

gboolean
qmi_message_tlv_write_gint8 (QmiMessage *self,
                             gint8 in,
                             GError **error);

Appends a signed byte variable to the TLV being built.

Since: 1.12

qmi_message_tlv_write_guint16 ()

gboolean
qmi_message_tlv_write_guint16 (QmiMessage *self,
                               QmiEndian endian,
                               guint16 in,
                               GError **error);

Appends an unsigned 16-bit integer to the TLV being built. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

Since: 1.12

qmi_message_tlv_write_gint16 ()

gboolean
qmi_message_tlv_write_gint16 (QmiMessage *self,
                              QmiEndian endian,
                              gint16 in,
                              GError **error);

Appends a signed 16-bit integer to the TLV being built. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

Since: 1.12

qmi_message_tlv_write_guint32 ()

gboolean
qmi_message_tlv_write_guint32 (QmiMessage *self,
                               QmiEndian endian,
                               guint32 in,
                               GError **error);

Appends an unsigned 32-bit integer to the TLV being built. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

Since: 1.12

qmi_message_tlv_write_gint32 ()

gboolean
qmi_message_tlv_write_gint32 (QmiMessage *self,
                              QmiEndian endian,
                              gint32 in,
                              GError **error);

Appends a signed 32-bit integer to the TLV being built. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

Since: 1.12

qmi_message_tlv_write_guint64 ()

gboolean
qmi_message_tlv_write_guint64 (QmiMessage *self,
                               QmiEndian endian,
                               guint64 in,
                               GError **error);

Appends an unsigned 64-bit integer to the TLV being built. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

Since: 1.12

qmi_message_tlv_write_gint64 ()

gboolean
qmi_message_tlv_write_gint64 (QmiMessage *self,
                              QmiEndian endian,
                              gint64 in,
                              GError **error);

Appends a signed 32-bit integer to the TLV being built. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

Since: 1.12

qmi_message_tlv_write_sized_guint ()

gboolean
qmi_message_tlv_write_sized_guint (QmiMessage *self,
                                   guint n_bytes,
                                   QmiEndian endian,
                                   guint64 in,
                                   GError **error);

Appends a n_bytes -sized unsigned integer to the TLV being built. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The value of n_bytes can be any between 1 and 8.

Since: 1.12

qmi_message_tlv_write_string ()

gboolean
qmi_message_tlv_write_string (QmiMessage *self,
                              guint8 n_size_prefix_bytes,
                              const gchar *in,
                              gssize in_length,
                              GError **error);

Appends a string to the TLV being built.

Fixed-sized strings should give n_size_prefix_bytes equal to 0.

Since: 1.12

qmi_message_tlv_read_init ()

gsize
qmi_message_tlv_read_init (QmiMessage *self,
                           guint8 type,
                           guint16 *out_tlv_length,
                           GError **error);

Starts reading a given TLV from the QmiMessage.

Since: 1.12

qmi_message_tlv_read_guint8 ()

gboolean
qmi_message_tlv_read_guint8 (QmiMessage *self,
                             gsize tlv_offset,
                             gsize *offset,
                             guint8 *out,
                             GError **error);

Reads an unsigned byte from the TLV.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_gint8 ()

gboolean
qmi_message_tlv_read_gint8 (QmiMessage *self,
                            gsize tlv_offset,
                            gsize *offset,
                            gint8 *out,
                            GError **error);

Reads a signed byte from the TLV.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_guint16 ()

gboolean
qmi_message_tlv_read_guint16 (QmiMessage *self,
                              gsize tlv_offset,
                              gsize *offset,
                              QmiEndian endian,
                              guint16 *out,
                              GError **error);

Reads an unsigned 16-bit integer from the TLV, in host byte order.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_gint16 ()

gboolean
qmi_message_tlv_read_gint16 (QmiMessage *self,
                             gsize tlv_offset,
                             gsize *offset,
                             QmiEndian endian,
                             gint16 *out,
                             GError **error);

Reads a signed 16-bit integer from the TLV, in host byte order.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_guint32 ()

gboolean
qmi_message_tlv_read_guint32 (QmiMessage *self,
                              gsize tlv_offset,
                              gsize *offset,
                              QmiEndian endian,
                              guint32 *out,
                              GError **error);

Reads an unsigned 32-bit integer from the TLV, in host byte order.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_gint32 ()

gboolean
qmi_message_tlv_read_gint32 (QmiMessage *self,
                             gsize tlv_offset,
                             gsize *offset,
                             QmiEndian endian,
                             gint32 *out,
                             GError **error);

Reads a signed 32-bit integer from the TLV, in host byte order.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_guint64 ()

gboolean
qmi_message_tlv_read_guint64 (QmiMessage *self,
                              gsize tlv_offset,
                              gsize *offset,
                              QmiEndian endian,
                              guint64 *out,
                              GError **error);

Reads an unsigned 64-bit integer from the TLV, in host byte order.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_gint64 ()

gboolean
qmi_message_tlv_read_gint64 (QmiMessage *self,
                             gsize tlv_offset,
                             gsize *offset,
                             QmiEndian endian,
                             gint64 *out,
                             GError **error);

Reads a signed 64-bit integer from the TLV, in host byte order.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_sized_guint ()

gboolean
qmi_message_tlv_read_sized_guint (QmiMessage *self,
                                  gsize tlv_offset,
                                  gsize *offset,
                                  guint n_bytes,
                                  QmiEndian endian,
                                  guint64 *out,
                                  GError **error);

Reads a b_bytes -sized integer from the TLV, in host byte order.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_gfloat_endian ()

gboolean
qmi_message_tlv_read_gfloat_endian (QmiMessage *self,
                                    gsize tlv_offset,
                                    gsize *offset,
                                    QmiEndian endian,
                                    gfloat *out,
                                    GError **error);

Reads a 32-bit floating-point number from the TLV.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_gdouble ()

gboolean
qmi_message_tlv_read_gdouble (QmiMessage *self,
                              gsize tlv_offset,
                              gsize *offset,
                              QmiEndian endian,
                              gdouble *out,
                              GError **error);

Reads a 64-bit floating-point number from the TLV.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.22

qmi_message_tlv_read_string ()

gboolean
qmi_message_tlv_read_string (QmiMessage *self,
                             gsize tlv_offset,
                             gsize *offset,
                             guint8 n_size_prefix_bytes,
                             guint16 max_size,
                             gchar **out,
                             GError **error);

Reads a string from the TLV.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

qmi_message_tlv_read_fixed_size_string ()

gboolean
qmi_message_tlv_read_fixed_size_string
                               (QmiMessage *self,
                                gsize tlv_offset,
                                gsize *offset,
                                guint16 string_length,
                                gchar *out,
                                GError **error);

Reads a string from the TLV.

The string written in out will need to be NUL-terminated by the caller.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

Since: 1.12

QmiMessageForeachRawTlvFn ()

void
(*QmiMessageForeachRawTlvFn) (guint8 type,
                              const guint8 *value,
                              gsize length,
                              gpointer user_data);

Callback type to use when iterating raw TLVs with qmi_message_foreach_raw_tlv().

Since: 1.0

qmi_message_foreach_raw_tlv ()

void
qmi_message_foreach_raw_tlv (QmiMessage *self,
                             QmiMessageForeachRawTlvFn func,
                             gpointer user_data);

Calls the given function for each TLV found within the QmiMessage.

Since: 1.0

qmi_message_get_raw_tlv ()

const guint8 *
qmi_message_get_raw_tlv (QmiMessage *self,
                         guint8 type,
                         guint16 *length);

Get the raw data buffer of a specific TLV within the QmiMessage.

Since: 1.0

qmi_message_add_raw_tlv ()

gboolean
qmi_message_add_raw_tlv (QmiMessage *self,
                         guint8 type,
                         const guint8 *raw,
                         gsize length,
                         GError **error);

Creates a new type TLV with the value given in raw , and adds it to the QmiMessage.

Since: 1.0

qmi_message_set_transaction_id ()

void
qmi_message_set_transaction_id (QmiMessage *self,
                                guint16 transaction_id);

Overwrites the transaction ID of the message.

Since: 1.8

qmi_message_get_printable_full ()

gchar *
qmi_message_get_printable_full (QmiMessage *self,
                                QmiMessageContext *context,
                                const gchar *line_prefix);

Gets a printable string with the contents of the whole QMI message.

If known, the printable string will contain translated TLV values as well as the raw data buffer contents.

The translation of the contents may be specific to the context provided, e.g. for vendor-specific messages.

If no context given, the behavior is the same as qmi_message_get_printable().

Since: 1.18

qmi_message_get_tlv_printable ()

gchar *
qmi_message_get_tlv_printable (QmiMessage *self,
                               const gchar *line_prefix,
                               guint8 type,
                               const guint8 *raw,
                               gsize raw_length);

Gets a printable string with the contents of the TLV.

This method is the most generic one and doesn't try to translate the TLV contents.

Since: 1.0

QMI_MESSAGE_QMUX_MARKER

#define QMI_MESSAGE_QMUX_MARKER (guint8) 0x01

First byte of every QMI message.

Since: 1.0

QmiMessage

typedef GByteArray QmiMessage;

An opaque type representing a QMI message.

Since: 1.0