qmi_device_close ()

gboolean
qmi_device_close (QmiDevice *self,
                  GError **error);

Synchronously closes a QmiDevice, preventing any further I/O.

If this device was opened with QMI_DEVICE_OPEN_FLAGS_MBIM , this operation will not wait for the response of the underlying MBIM close sequence.

Closing a QmiDevice multiple times will not return an error.

Since: 1.0

qmi_device_command ()

void
qmi_device_command (QmiDevice *self,
                    QmiMessage *message,
                    guint timeout,
                    GCancellable *cancellable,
                    GAsyncReadyCallback callback,
                    gpointer user_data);

Asynchronously sends a generic QmiMessage to the device with no context.

If the operation is cancelled via cancellable , a QMI_PROTOCOL_ERROR_ABORTED error will be returned always. If the QMI method may be aborted, there is no guarantee that the operation is truly aborted before the error is returned so it may really happen that the operation really succeeded and the method would still return QMI_PROTOCOL_ERROR_ABORTED. In order to use abortable methods and make sure the response is the correct one, use qmi_device_command_abortable().

When the operation is finished callback will be called. You can then call qmi_device_command_finish() to get the result of the operation.

Since: 1.0

qmi_device_command_finish ()

QmiMessage *
qmi_device_command_finish (QmiDevice *self,
                           GAsyncResult *res,
                           GError **error);

Finishes an operation started with qmi_device_command().

Since: 1.0

qmi_utils_read_guint8_from_buffer ()

void
qmi_utils_read_guint8_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   guint8 *out);

Reads an unsigned byte from the buffer.

The user needs to make sure that at least 1 byte is available in the buffer.

Also note that both buffer and buffer_size get updated after the 1 byte read.

Since: 1.0

qmi_utils_read_gint8_from_buffer ()

void
qmi_utils_read_gint8_from_buffer (const guint8 **buffer,
                                  guint16 *buffer_size,
                                  gint8 *out);

Reads a signed byte from the buffer.

The user needs to make sure that at least 1 byte is available in the buffer.

Also note that both buffer and buffer_size get updated after the 1 byte read.

Since: 1.0

qmi_utils_read_guint16_from_buffer ()

void
qmi_utils_read_guint16_from_buffer (const guint8 **buffer,
                                    guint16 *buffer_size,
                                    QmiEndian endian,
                                    guint16 *out);

Reads an unsigned 16-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specificed by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 2 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 2 bytes read.

Since: 1.0

qmi_utils_read_gint16_from_buffer ()

void
qmi_utils_read_gint16_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   gint16 *out);

Reads a signed 16-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 2 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 2 bytes read.

Since: 1.0

qmi_utils_read_guint32_from_buffer ()

void
qmi_utils_read_guint32_from_buffer (const guint8 **buffer,
                                    guint16 *buffer_size,
                                    QmiEndian endian,
                                    guint32 *out);

Reads an unsigned 32-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 4 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 4 bytes read.

Since: 1.0

qmi_utils_read_gint32_from_buffer ()

void
qmi_utils_read_gint32_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   gint32 *out);

Reads a signed 32-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 4 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 4 bytes read.

Since: 1.0

qmi_utils_read_guint64_from_buffer ()

void
qmi_utils_read_guint64_from_buffer (const guint8 **buffer,
                                    guint16 *buffer_size,
                                    QmiEndian endian,
                                    guint64 *out);

Reads an unsigned 64-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 8 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 8 bytes read.

Since: 1.0

qmi_utils_read_gint64_from_buffer ()

void
qmi_utils_read_gint64_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   gint64 *out);

Reads a signed 64-bit integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least 8 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 8 bytes read.

Since: 1.0

qmi_utils_read_sized_guint_from_buffer ()

void
qmi_utils_read_sized_guint_from_buffer
                               (const guint8 **buffer,
                                guint16 *buffer_size,
                                guint n_bytes,
                                QmiEndian endian,
                                guint64 *out);

Reads a n_bytes -sized unsigned integer from the buffer. The number in the buffer is expected to be given in the byte order specified by endian , and this method takes care of converting the read value to the proper host endianness.

The user needs to make sure that at least n_bytes bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the n_bytes bytes read.

Since: 1.0

qmi_utils_read_gfloat_from_buffer ()

void
qmi_utils_read_gfloat_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   gfloat *out);

Reads a 32-bit floating-point number from the buffer.

The user needs to make sure that at least 4 bytes are available in the buffer.

Also note that both buffer and buffer_size get updated after the 4 bytes read.

Since: 1.10

qmi_utils_read_string_from_buffer ()

void
qmi_utils_read_string_from_buffer (const guint8 **buffer,
                                   guint16 *buffer_size,
                                   guint8 length_prefix_size,
                                   guint16 max_size,
                                   gchar **out);

Reads a string from the buffer.

If length_prefix_size is greater than 0, only the amount of bytes given there will be read. Otherwise, up to buffer_size bytes will be read.

Also note that both buffer and buffer_size get updated after the write.

Since: 1.0

qmi_utils_read_fixed_size_string_from_buffer ()

void
qmi_utils_read_fixed_size_string_from_buffer
                               (const guint8 **buffer,
                                guint16 *buffer_size,
                                guint16 fixed_size,
                                gchar *out);

Reads a fixed_size -sized string from the buffer into the out buffer.

Also note that both buffer and buffer_size get updated after the fixed_size bytes read.

Since: 1.0

qmi_utils_write_guint8_to_buffer ()

void
qmi_utils_write_guint8_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  guint8 *in);

Writes an unsigned byte into the buffer.

The user needs to make sure that the buffer is at least 1 byte long.

Also note that both buffer and buffer_size get updated after the 1 byte write.

Since: 1.0

qmi_utils_write_gint8_to_buffer ()

void
qmi_utils_write_gint8_to_buffer (guint8 **buffer,
                                 guint16 *buffer_size,
                                 gint8 *in);

Writes a signed byte into the buffer.

The user needs to make sure that the buffer is at least 1 byte long.

Also note that both buffer and buffer_size get updated after the 1 byte write.

Since: 1.0

qmi_utils_write_guint16_to_buffer ()

void
qmi_utils_write_guint16_to_buffer (guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   guint16 *in);

Writes an unsigned 16-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 2 bytes long.

Also note that both buffer and buffer_size get updated after the 2 bytes write.

Since: 1.0

qmi_utils_write_gint16_to_buffer ()

void
qmi_utils_write_gint16_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  QmiEndian endian,
                                  gint16 *in);

Writes a signed 16-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 2 bytes long.

Also note that both buffer and buffer_size get updated after the 2 bytes write.

Since: 1.0

qmi_utils_write_guint32_to_buffer ()

void
qmi_utils_write_guint32_to_buffer (guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   guint32 *in);

Writes an unsigned 32-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 4 bytes long.

Also note that both buffer and buffer_size get updated after the 4 bytes write.

Since: 1.0

qmi_utils_write_gint32_to_buffer ()

void
qmi_utils_write_gint32_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  QmiEndian endian,
                                  gint32 *in);

Writes a signed 32-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 4 bytes long.

Also note that both buffer and buffer_size get updated after the 4 bytes write.

Since: 1.0

qmi_utils_write_guint64_to_buffer ()

void
qmi_utils_write_guint64_to_buffer (guint8 **buffer,
                                   guint16 *buffer_size,
                                   QmiEndian endian,
                                   guint64 *in);

Writes an unsigned 64-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 8 bytes long.

Also note that both buffer and buffer_size get updated after the 8 bytes write.

Since: 1.0

qmi_utils_write_gint64_to_buffer ()

void
qmi_utils_write_gint64_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  QmiEndian endian,
                                  gint64 *in);

Writes a signed 64-bit integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least 8 bytes long.

Also note that both buffer and buffer_size get updated after the 8 bytes write.

Since: 1.0

qmi_utils_write_sized_guint_to_buffer ()

void
qmi_utils_write_sized_guint_to_buffer (guint8 **buffer,
                                       guint16 *buffer_size,
                                       guint n_bytes,
                                       QmiEndian endian,
                                       guint64 *in);

Writes a n_bytes -sized unsigned integer into the buffer. The number to be written is expected to be given in host endianness, and this method takes care of converting the value written to the byte order specified by endian .

The user needs to make sure that the buffer is at least n_bytes bytes long.

Also note that both buffer and buffer_size get updated after the n_bytes bytes write.

Since: 1.0

qmi_utils_write_string_to_buffer ()

void
qmi_utils_write_string_to_buffer (guint8 **buffer,
                                  guint16 *buffer_size,
                                  guint8 length_prefix_size,
                                  const gchar *in);

Writes a string to the buffer.

If length_prefix_size is greater than 0, a length prefix integer will be included in the write operation.

The user needs to make sure that the buffer has enough space for both the whole string and the length prefix.

Also note that both buffer and buffer_size get updated after the write.

Since: 1.0

qmi_utils_write_fixed_size_string_to_buffer ()

void
qmi_utils_write_fixed_size_string_to_buffer
                               (guint8 **buffer,
                                guint16 *buffer_size,
                                guint16 fixed_size,
                                const gchar *in);

Writes a fixed_size -sized string to the buffer, without any length prefix.

The user needs to make sure that the buffer is at least fixed_size bytes long.

Also note that both buffer and buffer_size get updated after the fixed_size bytes write.

Since: 1.0

qmi_message_get_version_introduced ()

gboolean
qmi_message_get_version_introduced (QmiMessage *self,
                                    guint *major,
                                    guint *minor);

Gets, if known, the service version in which the given message was first introduced.

Since: 1.0

qmi_message_get_version_introduced_full ()

gboolean
qmi_message_get_version_introduced_full
                               (QmiMessage *self,
                                QmiMessageContext *context,
                                guint *major,
                                guint *minor);

Gets, if known, the service version in which the given message was first introduced.

The lookup of the version may be specific to the context provided, e.g. for vendor-specific messages.

If no context given, the behavior is the same as qmi_message_get_version_introduced().

Since 1.26, this method will return FALSE as the library no longer provides version information for each message, given that this information was never reliable.

Since: 1.18

qmi_message_get_printable ()

gchar *
qmi_message_get_printable (QmiMessage *self,
                           const gchar *line_prefix);

Gets a printable string with the contents of the whole QMI message.

If known, the printable string will contain translated TLV values as well as the raw data buffer contents.

Since: 1.0

qmi_message_dms_set_service_programming_code_input_get_new ()

gboolean
qmi_message_dms_set_service_programming_code_input_get_new
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar **arg_new,
                                GError **error);

Get the 'New Code' field from self .

Since: 1.0

qmi_message_dms_set_service_programming_code_input_set_new ()

gboolean
qmi_message_dms_set_service_programming_code_input_set_new
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar *arg_new,
                                GError **error);

Set the 'New Code' field in the message.

Since: 1.0

qmi_message_dms_set_service_programming_code_input_get_current ()

gboolean
qmi_message_dms_set_service_programming_code_input_get_current
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar **arg_current,
                                GError **error);

Get the 'Current Code' field from self .

Since: 1.0

qmi_message_dms_set_service_programming_code_input_set_current ()

gboolean
qmi_message_dms_set_service_programming_code_input_set_current
                               (QmiMessageDmsSetServiceProgrammingCodeInput *self,
                                const gchar *arg_current,
                                GError **error);

Get the 'Current Code' field from self .

Since: 1.0

qmi_message_tlv_read_gfloat ()

gboolean
qmi_message_tlv_read_gfloat (QmiMessage *self,
                             gsize tlv_offset,
                             gsize *offset,
                             gfloat *out,
                             GError **error);

Reads a 32-bit floating-point number from the TLV.

offset needs to point to a valid gsize specifying the index to start reading from within the TLV value (0 for the first item). If the variable is successfully read, offset will be updated to point past the read item.

The implementation assumes the float is encoded with the same endianness as the host, which may not be true. The use of this method is discouraged, and new code should use qmi_message_tlv_read_gfloat_endian() instead.

Since: 1.12

qmi_message_uim_change_pin_input_get_session_information ()

gboolean
qmi_message_uim_change_pin_input_get_session_information
                               (QmiMessageUimChangePinInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

Get the 'Session Information' field from self .

Since: 1.14

qmi_message_uim_change_pin_input_set_session_information ()

gboolean
qmi_message_uim_change_pin_input_set_session_information
                               (QmiMessageUimChangePinInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

Set the 'Session Information' field in the message.

Since: 1.14

qmi_message_uim_get_file_attributes_input_get_session_information ()

gboolean
qmi_message_uim_get_file_attributes_input_get_session_information
                               (QmiMessageUimGetFileAttributesInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

Get the 'Session Information' field from self .

Since: 1.6

qmi_message_uim_get_file_attributes_input_set_session_information ()

gboolean
qmi_message_uim_get_file_attributes_input_set_session_information
                               (QmiMessageUimGetFileAttributesInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

Set the 'Session Information' field in the message.

Since: 1.6

qmi_message_uim_read_record_input_get_session_information ()

gboolean
qmi_message_uim_read_record_input_get_session_information
                               (QmiMessageUimReadRecordInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

Get the 'Session Information' field from self .

Since: 1.6

qmi_message_uim_read_record_input_set_session_information ()

gboolean
qmi_message_uim_read_record_input_set_session_information
                               (QmiMessageUimReadRecordInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

Set the 'Session Information' field in the message.

Since: 1.6

qmi_message_uim_read_transparent_input_get_session_information ()

gboolean
qmi_message_uim_read_transparent_input_get_session_information
                               (QmiMessageUimReadTransparentInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

Get the 'Session Information' field from self .

Since: 1.6

qmi_message_uim_read_transparent_input_set_session_information ()

gboolean
qmi_message_uim_read_transparent_input_set_session_information
                               (QmiMessageUimReadTransparentInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

Set the 'Session Information' field in the message.

Since: 1.6

qmi_message_uim_set_pin_protection_input_get_session_information ()

gboolean
qmi_message_uim_set_pin_protection_input_get_session_information
                               (QmiMessageUimSetPinProtectionInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

Get the 'Session Information' field from self .

Since: 1.14

qmi_message_uim_set_pin_protection_input_set_session_information ()

gboolean
qmi_message_uim_set_pin_protection_input_set_session_information
                               (QmiMessageUimSetPinProtectionInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

Set the 'Session Information' field in the message.

Since: 1.14

qmi_message_uim_unblock_pin_input_get_session_information ()

gboolean
qmi_message_uim_unblock_pin_input_get_session_information
                               (QmiMessageUimUnblockPinInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

Get the 'Session Information' field from self .

Since: 1.14

qmi_message_uim_unblock_pin_input_set_session_information ()

gboolean
qmi_message_uim_unblock_pin_input_set_session_information
                               (QmiMessageUimUnblockPinInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

Set the 'Session Information' field in the message.

Since: 1.14

qmi_message_uim_verify_pin_input_get_session_information ()

gboolean
qmi_message_uim_verify_pin_input_get_session_information
                               (QmiMessageUimVerifyPinInput *self,
                                QmiUimSessionType *value_session_information_session_type,
                                const gchar **value_session_information_application_identifier,
                                GError **error);

Get the 'Session Information' field from self .

Since: 1.14

qmi_message_uim_verify_pin_input_set_session_information ()

gboolean
qmi_message_uim_verify_pin_input_set_session_information
                               (QmiMessageUimVerifyPinInput *self,
                                QmiUimSessionType value_session_information_session_type,
                                const gchar *value_session_information_application_identifier,
                                GError **error);

Set the 'Session Information' field in the message.

Since: 1.14

qmi_message_wda_get_data_format_output_get_uplink_data_aggregation_max_size ()

gboolean
qmi_message_wda_get_data_format_output_get_uplink_data_aggregation_max_size
                               (QmiMessageWdaGetDataFormatOutput *self,
                                guint32 *value_uplink_data_aggregation_max_size,
                                GError **error);

Get the 'Uplink Data Aggregation Max Size' field from self .

Since: 1.10

qmi_message_nas_get_operator_name_output_get_operator_nitz_information ()

gboolean
qmi_message_nas_get_operator_name_output_get_operator_nitz_information
                               (QmiMessageNasGetOperatorNameOutput *self,
                                QmiNasPlmnEncodingScheme *value_operator_nitz_information_name_encoding,
                                QmiNasPlmnNameCountryInitials *value_operator_nitz_information_short_country_initials,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_long_name_spare_bits,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_short_name_spare_bits,
                                const gchar **value_operator_nitz_information_long_name,
                                const gchar **value_operator_nitz_information_short_name,
                                GError **error);

Get the 'Operator NITZ Information' field from self .

Since: 1.18

qmi_indication_nas_operator_name_output_get_operator_nitz_information ()

gboolean
qmi_indication_nas_operator_name_output_get_operator_nitz_information
                               (QmiIndicationNasOperatorNameOutput *self,
                                QmiNasPlmnEncodingScheme *value_operator_nitz_information_name_encoding,
                                QmiNasPlmnNameCountryInitials *value_operator_nitz_information_short_country_initials,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_long_name_spare_bits,
                                QmiNasPlmnNameSpareBits *value_operator_nitz_information_short_name_spare_bits,
                                const gchar **value_operator_nitz_information_long_name,
                                const gchar **value_operator_nitz_information_short_name,
                                GError **error);

Get the 'Operator NITZ Information' field from self .

Since: 1.18

qmi_message_nas_get_home_network_output_get_home_network_3gpp2 ()

gboolean
qmi_message_nas_get_home_network_output_get_home_network_3gpp2
                               (QmiMessageNasGetHomeNetworkOutput *self,
                                guint16 *value_home_network_3gpp2_mcc,
                                guint16 *value_home_network_3gpp2_mnc,
                                QmiNasNetworkDescriptionDisplay *value_home_network_3gpp2_display_description,
                                QmiNasNetworkDescriptionEncoding *value_home_network_3gpp2_description_encoding,
                                const gchar **value_home_network_3gpp2_description,
                                GError **error);

Get the 'Home Network 3GPP2' field from self .

Since: 1.0

qmi_dms_dell_firmware_version_type_get_string ()

const gchar *
qmi_dms_dell_firmware_version_type_get_string
                               (QmiDmsDellFirmwareVersionType val);

Gets the nickname string for the QmiDmsFoxconnFirmwareVersionType specified at val .

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_input_new ()

QmiMessageDmsDellGetFirmwareVersionInput *
qmi_message_dms_dell_get_firmware_version_input_new
                               (void);

Allocates a new QmiMessageDmsDellGetFirmwareVersionInput.

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_input_ref ()

QmiMessageDmsDellGetFirmwareVersionInput *
qmi_message_dms_dell_get_firmware_version_input_ref
                               (QmiMessageDmsDellGetFirmwareVersionInput *self);

Atomically increments the reference count of self by one.

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_input_set_version_type ()

gboolean
qmi_message_dms_dell_get_firmware_version_input_set_version_type
                               (QmiMessageDmsDellGetFirmwareVersionInput *self,
                                QmiDmsDellFirmwareVersionType value_version_type,
                                GError **error);

Set the 'Version Type' field in the message.

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_input_get_version_type ()

gboolean
qmi_message_dms_dell_get_firmware_version_input_get_version_type
                               (QmiMessageDmsDellGetFirmwareVersionInput *self,
                                QmiDmsDellFirmwareVersionType *value_version_type,
                                GError **error);

Get the 'Version Type' field from self .

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_input_unref ()

void
qmi_message_dms_dell_get_firmware_version_input_unref
                               (QmiMessageDmsDellGetFirmwareVersionInput *self);

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_output_ref ()

QmiMessageDmsDellGetFirmwareVersionOutput *
qmi_message_dms_dell_get_firmware_version_output_ref
                               (QmiMessageDmsDellGetFirmwareVersionOutput *self);

Atomically increments the reference count of self by one.

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_output_unref ()

void
qmi_message_dms_dell_get_firmware_version_output_unref
                               (QmiMessageDmsDellGetFirmwareVersionOutput *self);

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_output_get_result ()

gboolean
qmi_message_dms_dell_get_firmware_version_output_get_result
                               (QmiMessageDmsDellGetFirmwareVersionOutput *self,
                                GError **error);

Get the result of the QMI operation.

Since: 1.22.4

qmi_message_dms_dell_get_firmware_version_output_get_version ()

gboolean
qmi_message_dms_dell_get_firmware_version_output_get_version
                               (QmiMessageDmsDellGetFirmwareVersionOutput *self,
                                const gchar **value_version,
                                GError **error);

Get the 'Version' field from self .

Since: 1.22.4

qmi_client_dms_dell_get_firmware_version ()

void
qmi_client_dms_dell_get_firmware_version
                               (QmiClientDms *self,
                                QmiMessageDmsDellGetFirmwareVersionInput *input,
                                guint timeout,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously sends a Dell Get Firmware Version request to the device.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.

You can then call qmi_client_dms_dell_get_firmware_version_finish() to get the result of the operation.

Since: 1.22.4

qmi_client_dms_dell_get_firmware_version_finish ()

QmiMessageDmsDellGetFirmwareVersionOutput *
qmi_client_dms_dell_get_firmware_version_finish
                               (QmiClientDms *self,
                                GAsyncResult *res,
                                GError **error);

Finishes an async operation started with qmi_client_dms_dell_get_firmware_version().

Since: 1.22.4

qmi_dms_dell_device_mode_get_string ()

const gchar *
qmi_dms_dell_device_mode_get_string (QmiDmsDellDeviceMode val);

Gets the nickname string for the QmiDmsDellDeviceMode specified at val .

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_input_new ()

QmiMessageDmsDellChangeDeviceModeInput *
qmi_message_dms_dell_change_device_mode_input_new
                               (void);

Allocates a new QmiMessageDmsDellChangeDeviceModeInput.

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_input_ref ()

QmiMessageDmsDellChangeDeviceModeInput *
qmi_message_dms_dell_change_device_mode_input_ref
                               (QmiMessageDmsDellChangeDeviceModeInput *self);

Atomically increments the reference count of self by one.

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_input_set_mode ()

gboolean
qmi_message_dms_dell_change_device_mode_input_set_mode
                               (QmiMessageDmsDellChangeDeviceModeInput *self,
                                QmiDmsDellDeviceMode value_mode,
                                GError **error);

Set the 'Mode' field in the message.

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_input_get_mode ()

gboolean
qmi_message_dms_dell_change_device_mode_input_get_mode
                               (QmiMessageDmsDellChangeDeviceModeInput *self,
                                QmiDmsDellDeviceMode *value_mode,
                                GError **error);

Get the 'Mode' field from self .

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_input_unref ()

void
qmi_message_dms_dell_change_device_mode_input_unref
                               (QmiMessageDmsDellChangeDeviceModeInput *self);

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_output_ref ()

QmiMessageDmsDellChangeDeviceModeOutput *
qmi_message_dms_dell_change_device_mode_output_ref
                               (QmiMessageDmsDellChangeDeviceModeOutput *self);

Atomically increments the reference count of self by one.

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_output_unref ()

void
qmi_message_dms_dell_change_device_mode_output_unref
                               (QmiMessageDmsDellChangeDeviceModeOutput *self);

Atomically decrements the reference count of self by one. If the reference count drops to 0, self is completely disposed.

Since: 1.22.4

qmi_message_dms_dell_change_device_mode_output_get_result ()

gboolean
qmi_message_dms_dell_change_device_mode_output_get_result
                               (QmiMessageDmsDellChangeDeviceModeOutput *self,
                                GError **error);

Get the result of the QMI operation.

Since: 1.22.4

qmi_client_dms_dell_change_device_mode ()

void
qmi_client_dms_dell_change_device_mode
                               (QmiClientDms *self,
                                QmiMessageDmsDellChangeDeviceModeInput *input,
                                guint timeout,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Asynchronously sends a Dell Change Device Mode request to the device.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.

You can then call qmi_client_dms_dell_change_device_mode_finish() to get the result of the operation.

Since: 1.22.4

qmi_client_dms_dell_change_device_mode_finish ()

QmiMessageDmsDellChangeDeviceModeOutput *
qmi_client_dms_dell_change_device_mode_finish
                               (QmiClientDms *self,
                                GAsyncResult *res,
                                GError **error);

Finishes an async operation started with qmi_client_dms_dell_change_device_mode().

Since: 1.22.4

QMI_NAS_SIM_REJECT_STATE_SIM_VAILABLE

#define QMI_NAS_SIM_REJECT_STATE_SIM_VAILABLE (QmiDeprecatedNasSimRejectState) QMI_NAS_SIM_REJECT_STATE_SIM_AVAILABLE

SIM available.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_VACANT

Address is valid but not yet allocated.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_ADDRESS_TRANSLATION_FAILURE

Address is invalid.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_RESOURCE_SHORTAGE

Network resource shortage.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_FAILURE

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_FAILURE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_FAILURE

Network failed.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_INVALID_TELESERVICE_ID

SMS teleservice ID is invalid.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_NETWORK_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_NETWORK_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_NETWORK_OTHER

Other network error.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NO_PAGE_RESPONSE

No page response from destination.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_BUSY

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_BUSY (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_BUSY

Destination is busy.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NO_ACK

No acknowledge from destination.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_RESOURCE_SHORTAGE

Destination resource shortage.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_SMS_DELIVERY_POSTPONED

SMS delivery postponed.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_OUT_OF_SERVICE

Destination out of service.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_NOT_AT_ADDRESS

Destination not at address.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_DESTINATION_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_DESTINATION_OTHER

Other destination error.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE

#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_RESOURCE_SHORTAGE

Radio interface resource shortage.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY

#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_INCOMPATIBILITY

Radio interface incompatibility.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_RADIO_INTERFACE_OTHER

Other radio interface error

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_ENCODING

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_ENCODING (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_ENCODING

Encoding error.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_ORIGIN_DENIED

SMS origin denied.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_DESTINATION_DENIED

SMS destination denied.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SUPPLEMENTARY_SERVICE_NOT_SUPPORTED

Supplementary service not supported.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_SMS_NOT_SUPPORTED

SMS not supported.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_MISSING_EXPECTED_PARAMETER

Missing optional expected parameter.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_MISSING_MANDATORY_PARAMETER

Missing mandatory parameter.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_UNRECOGNIZED_PARAMETER_VALUE

Unrecognized parameter value.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_UNEXPECTED_PARAMETER_VALUE

Unexpected parameter value.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_USER_DATA_SIZE_ERROR

User data size error.

Since: 1.0

QMI_WDS_CDMA_CAUSE_CODE_GENERAL_OTHER

#define QMI_WDS_CDMA_CAUSE_CODE_GENERAL_OTHER (QmiDeprecatedWdsCdmaCauseCode) QMI_WMS_CDMA_CAUSE_CODE_GENERAL_OTHER

Other general error.

Since: 1.0

QMI_PROTOCOL_ERROR_QOS_UNAVAILABLE

#define QMI_PROTOCOL_ERROR_QOS_UNAVAILABLE (QmiDeprecatedProtocolError) QMI_PROTOCOL_ERROR_REQUESTED_NUMBER_UNSUPPORTED

QoS unavailable.

Since: 1.0

QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFIGURATION_FAILED

#define QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFIGURATION_FAILED (QmiDeprecatedWdsVerboseCallEndReasonCm) QMI_WDS_VERBOSE_CALL_END_REASON_CM_CONFERENCE_FAILED

Conference (not configuration) failed.

Since: 1.0

enum QmiDmsDellFirmwareVersionType

Dell specific firmware version types.

Since: 1.22.4

QmiMessageDmsDellGetFirmwareVersionInput

#define QmiMessageDmsDellGetFirmwareVersionInput QmiMessageDmsFoxconnGetFirmwareVersionInput

The QmiMessageDmsDellGetFirmwareVersionInput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4

QmiMessageDmsDellGetFirmwareVersionOutput

#define QmiMessageDmsDellGetFirmwareVersionOutput QmiMessageDmsFoxconnGetFirmwareVersionOutput

The QmiMessageDmsDellGetFirmwareVersionOutput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4

enum QmiDmsDellDeviceMode

Dell specific device modes.

Since: 1.22.4

QmiMessageDmsDellChangeDeviceModeInput

#define QmiMessageDmsDellChangeDeviceModeInput QmiMessageDmsFoxconnChangeDeviceModeInput

The QmiMessageDmsDellChangeDeviceModeInput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4

QmiMessageDmsDellChangeDeviceModeOutput

#define QmiMessageDmsDellChangeDeviceModeOutput QmiMessageDmsFoxconnChangeDeviceModeOutput

The QmiMessageDmsDellChangeDeviceModeOutput structure contains private data and should only be accessed using the provided API.

Since: 1.22.4