qmi_device_new ()

void
qmi_device_new (GFile *file,
                GCancellable *cancellable,
                GAsyncReadyCallback callback,
                gpointer user_data);

Asynchronously creates a QmiDevice object to manage file . When the operation is finished, callback will be invoked. You can then call qmi_device_new_finish() to get the result of the operation.

Since: 1.0

qmi_device_new_finish ()

QmiDevice *
qmi_device_new_finish (GAsyncResult *res,
                       GError **error);

Finishes an operation started with qmi_device_new().

Since: 1.0

qmi_device_get_file ()

GFile *
qmi_device_get_file (QmiDevice *self);

Get the GFile associated with this QmiDevice.

Since: 1.0

qmi_device_peek_file ()

GFile *
qmi_device_peek_file (QmiDevice *self);

Get the GFile associated with this QmiDevice, without increasing the reference count on the returned object.

Since: 1.0

qmi_device_get_path ()

const gchar *
qmi_device_get_path (QmiDevice *self);

Get the system path of the underlying QMI device.

Since: 1.0

qmi_device_get_path_display ()

const gchar *
qmi_device_get_path_display (QmiDevice *self);

Get the system path of the underlying QMI device in UTF-8.

Since: 1.0

qmi_device_get_wwan_iface ()

const gchar *
qmi_device_get_wwan_iface (QmiDevice *self);

Get the WWAN interface name associated with this /dev/cdc-wdm control port. This value will be loaded every time it's asked for it.

Since: 1.14

qmi_device_get_expected_data_format ()

QmiDeviceExpectedDataFormat
qmi_device_get_expected_data_format (QmiDevice *self,
                                     GError **error);

Retrieves the data format currently expected by the kernel in the network interface.

If QMI_DEVICE_EXPECTED_DATA_FORMAT_UNKNOWN is returned, the user should assume that 802.3 is the expected format.

Since: 1.14

qmi_device_set_expected_data_format ()

gboolean
qmi_device_set_expected_data_format (QmiDevice *self,
                                     QmiDeviceExpectedDataFormat format,
                                     GError **error);

Configures the data format currently expected by the kernel in the network interface.

Since: 1.14

qmi_device_is_open ()

gboolean
qmi_device_is_open (QmiDevice *self);

Checks whether the QmiDevice is open for I/O.

Since: 1.0

qmi_device_open ()

void
qmi_device_open (QmiDevice *self,
                 QmiDeviceOpenFlags flags,
                 guint timeout,
                 GCancellable *cancellable,
                 GAsyncReadyCallback callback,
                 gpointer user_data);

Asynchronously opens a QmiDevice for I/O.

When the operation is finished callback will be called. You can then call qmi_device_open_finish() to get the result of the operation.

Since: 1.0

qmi_device_open_finish ()

gboolean
qmi_device_open_finish (QmiDevice *self,
                        GAsyncResult *res,
                        GError **error);

Finishes an asynchronous open operation started with qmi_device_open().

Since: 1.0

qmi_device_close_async ()

void
qmi_device_close_async (QmiDevice *self,
                        guint timeout,
                        GCancellable *cancellable,
                        GAsyncReadyCallback callback,
                        gpointer user_data);

Asynchronously closes a QmiDevice, preventing any further I/O.

If this device was opened with QMI_DEVICE_OPEN_FLAGS_MBIM , this operation will wait for the response of the underlying MBIM close sequence.

Closing a QmiDevice multiple times will not return an error.

When the operation is finished callback will be called. You can then call qmi_device_close_finish() to get the result of the operation.

Since: 1.18

qmi_device_close_finish ()

gboolean
qmi_device_close_finish (QmiDevice *self,
                         GAsyncResult *res,
                         GError **error);

Finishes an operation started with qmi_device_close_async().

Since: 1.18

qmi_device_allocate_client ()

void
qmi_device_allocate_client (QmiDevice *self,
                            QmiService service,
                            guint8 cid,
                            guint timeout,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Asynchronously allocates a new QmiClient in self .

If QMI_CID_NONE is given in cid , a new client ID will be allocated; otherwise a client with the given cid will be generated.

When the operation is finished callback will be called. You can then call qmi_device_allocate_client_finish() to get the result of the operation.

Note: Clients for the QMI_SERVICE_CTL cannot be created with this method; instead get/peek the implicit one from self .

Since: 1.0

qmi_device_allocate_client_finish ()

QmiClient *
qmi_device_allocate_client_finish (QmiDevice *self,
                                   GAsyncResult *res,
                                   GError **error);

Finishes an operation started with qmi_device_allocate_client().

Since: 1.0

qmi_device_release_client ()

void
qmi_device_release_client (QmiDevice *self,
                           QmiClient *client,
                           QmiDeviceReleaseClientFlags flags,
                           guint timeout,
                           GCancellable *cancellable,
                           GAsyncReadyCallback callback,
                           gpointer user_data);

Asynchronously releases the QmiClient from the QmiDevice.

Once the QmiClient has been released, it cannot be used any more to perform operations.

When the operation is finished callback will be called. You can then call qmi_device_release_client_finish() to get the result of the operation.

Since: 1.0

qmi_device_release_client_finish ()

gboolean
qmi_device_release_client_finish (QmiDevice *self,
                                  GAsyncResult *res,
                                  GError **error);

Finishes an operation started with qmi_device_release_client().

Note that even if the release operation returns an error, the client should anyway be considered released, and shouldn't be used afterwards.

Since: 1.0

qmi_device_set_instance_id ()

void
qmi_device_set_instance_id (QmiDevice *self,
                            guint8 instance_id,
                            guint timeout,
                            GCancellable *cancellable,
                            GAsyncReadyCallback callback,
                            gpointer user_data);

Sets the instance ID of the QmiDevice.

When the operation is finished callback will be called. You can then call qmi_device_set_instance_id_finish() to get the result of the operation.

Since: 1.0

qmi_device_set_instance_id_finish ()

gboolean
qmi_device_set_instance_id_finish (QmiDevice *self,
                                   GAsyncResult *res,
                                   guint16 *link_id,
                                   GError **error);

Finishes an operation started with qmi_device_set_instance_id().

Since: 1.0

qmi_device_command ()

void
qmi_device_command (QmiDevice *self,
                    QmiMessage *message,
                    guint timeout,
                    GCancellable *cancellable,
                    GAsyncReadyCallback callback,
                    gpointer user_data);

Asynchronously sends a generic QmiMessage to the device with no context.

When the operation is finished callback will be called. You can then call qmi_device_command_finish() to get the result of the operation.

Since: 1.0

qmi_device_command_finish ()

QmiMessage *
qmi_device_command_finish (QmiDevice *self,
                           GAsyncResult *res,
                           GError **error);

Finishes an operation started with qmi_device_command().

Since: 1.0

qmi_device_command_full ()

void
qmi_device_command_full (QmiDevice *self,
                         QmiMessage *message,
                         QmiMessageContext *message_context,
                         guint timeout,
                         GCancellable *cancellable,
                         GAsyncReadyCallback callback,
                         gpointer user_data);

Asynchronously sends a QmiMessage to the device.

The message will be processed according to the specific message_context given.

When the operation is finished callback will be called. You can then call qmi_device_command_full_finish() to get the result of the operation.

If no context given, the behavior is the same as qmi_device_command().

Since: 1.18

qmi_device_command_full_finish ()

QmiMessage *
qmi_device_command_full_finish (QmiDevice *self,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with qmi_device_command_full().

Since: 1.18

qmi_device_get_service_version_info ()

void
qmi_device_get_service_version_info (QmiDevice *self,
                                     guint timeout,
                                     GCancellable *cancellable,
                                     GAsyncReadyCallback callback,
                                     gpointer user_data);

Asynchronously requests the service version information of the device.

When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.

You can then call qmi_device_get_service_version_info_finish() to get the result of the operation.

Since: 1.6

qmi_device_get_service_version_info_finish ()

GArray *
qmi_device_get_service_version_info_finish
                               (QmiDevice *self,
                                GAsyncResult *res,
                                GError **error);

Finishes an operation started with qmi_device_get_service_version_info().

Since: 1.6

qmi_device_open_flags_build_string_from_mask ()

gchar *
qmi_device_open_flags_build_string_from_mask
                               (QmiDeviceOpenFlags mask);

Builds a string containing a comma-separated list of nicknames for each QmiDeviceOpenFlags in mask .

Since: 1.0

qmi_device_release_client_flags_build_string_from_mask ()

gchar *
qmi_device_release_client_flags_build_string_from_mask
                               (QmiDeviceReleaseClientFlags mask);

Builds a string containing a comma-separated list of nicknames for each QmiDeviceReleaseClientFlags in mask .

Since: 1.0

qmi_device_expected_data_format_get_string ()

const gchar *
qmi_device_expected_data_format_get_string
                               (QmiDeviceExpectedDataFormat val);

Gets the nickname string for the QmiDeviceExpectedDataFormat specified at val .

Since: 1.14

QMI_DEVICE_FILE

#define QMI_DEVICE_FILE "device-file"

Symbol defining the “device-file” property.

Since: 1.0

QMI_DEVICE_NO_FILE_CHECK

#define QMI_DEVICE_NO_FILE_CHECK "device-no-file-check"

Symbol defining the “device-no-file-check” property.

Since: 1.12

QMI_DEVICE_PROXY_PATH

#define QMI_DEVICE_PROXY_PATH "device-proxy-path"

Symbol defining the “device-proxy-path” property.

Since: 1.12

QMI_DEVICE_WWAN_IFACE

#define QMI_DEVICE_WWAN_IFACE "device-wwan-iface"

Symbol defining the “device-wwan-iface” property.

Since: 1.14

QMI_DEVICE_SIGNAL_INDICATION

#define QMI_DEVICE_SIGNAL_INDICATION "indication"

Symbol defining the “indication” signal.

Since: 1.8

QMI_DEVICE_SIGNAL_REMOVED

#define QMI_DEVICE_SIGNAL_REMOVED "device-removed"

struct QmiDevice

struct QmiDevice;

The QmiDevice structure contains private data and should only be accessed using the provided API.

Since: 1.0

enum QmiDeviceOpenFlags

Flags to specify which actions to be performed when the device is open.

Since: 1.0

enum QmiDeviceReleaseClientFlags

Flags to specify which actions to be performed when releasing the client.

Since: 1.0

QmiDeviceServiceVersionInfo

typedef struct {
    QmiService service;
    guint16    major_version;
    guint16    minor_version;
} QmiDeviceServiceVersionInfo;

Version information for a service.

Since: 1.6

enum QmiDeviceExpectedDataFormat

Data format expected by the kernel.

Since: 1.14

The “device-file” property

  “device-file”              GFile *

File to the underlying QMI device.

Flags: Read / Write / Construct Only

Since: 1.0

The “device-no-file-check” property

  “device-no-file-check”     gboolean

Don't check for file existence when creating the Qmi device.

Flags: Write / Construct Only

Default value: FALSE

Since: 1.12

The “device-proxy-path” property

  “device-proxy-path”        gchar *

Path of the abstract socket where the proxy is available.

Flags: Write / Construct Only

Default value: "qmi-proxy"

Since: 1.12

The “device-wwan-iface” property

  “device-wwan-iface”        gchar *

Name of the WWAN network interface associated with the control port.

Flags: Read

Default value: NULL

Since: 1.14

The “device-removed” signal

void
user_function (QmiDevice *object,
               gpointer   user_data)

The ::device-removed signal is emitted when an unexpected port hang-up is received.

Flags: Run Last

Since: 1.20

The “indication” signal

void
user_function (QmiDevice  *object,
               GByteArray *output,
               gpointer    user_data)

The ::indication signal gets emitted when a QMI indication is received.

Flags: Run Last

Since: 1.8